Effects of heparin immobilization on the surface characteristics of a biological tissue fixed with a naturally occurring crosslinking agent (genipin): an in vitro study

Heparinized biomaterials have been used to manufacture blood-contacting prostheses. The present study was intended to characterize the surface properties of a genipin-fixed biological tissue immobilized with heparin using the methods of ionic binding (the /h-i tissue) or covalent binding via multi-point attachment (the /h-m tissue) or end-point attachment (the /h-e tissue). The surface characteristics of test tissues evaluated were water contact angle, surface tension, protein adsorption, platelet adhesion, and cellular compatibility. Nonheparinized and the glutaraldehyde-fixed counterparts were used as controls. It was found that immobilization of heparin on the glutaraldehyde- and genipin-fixed tissues increased their hydrophilicity and surface tension and suppressed their mole ratio of adsorbed fibrinogen to adsorbed albumin and the amount of platelets adhered. Among the heparinized tissues, the /h-m tissue was more hydrophobic and had a higher mole ratio of adsorbed fibrinogen to adsorbed albumin and a greater amount of platelets adhered than the /h-i and /h-e tissues. In general, the surface characteristics of the /h-i tissue were comparable to the /h-e tissue. However, it is known that the ionically immobilized heparin may be displaced from the surface by an ion-exchange mechanism when exposed to blood. There were no significant differences in hydrophilicity, surface tension, the mole ratio of adsorbed fibrinogen to adsorbed albumin, and the amount of platelet adhesion between the glutaraldehyde- and genipin-fixed tissues in comparison with their respective counterparts. However, the cellular compatibility of the genipin-fixed tissues with or without heparinization was significantly superior to its glutaraldehyde-fixed counterparts. (C) 2001 Elsevier Science Ltd. All rights reserved.