Journal
IEEE ELECTRON DEVICE LETTERS
Volume 23, Issue 2, Pages 76-78Publisher
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
DOI: 10.1109/55.981311
Keywords
etching; GaN; heterojunctions; MODFETs; ohmic contacts
Categories
Ask authors/readers for more resources
Pre-metal-deposition reactive ion etching (RIE) was performed on an Al0.3Ga0.7N/AlN/GaN heterostructure in order to improve the metal-to-semiconductor contact resistance. An optimum AlGaN thickness for minimizing contact resistance was determined. An initial decrease in contact resistance with etching time was explained in terms of removal of an oxide surface layer and/or by an increase in tunnelling current with the decrease of the AlGaN thickness. The presence of a dissimilar surface layer was confirmed by an initial nonuniform etch depth rate. An increase in contact resistance for deeper etches was experienced. The increase was related to depletion of the two-dimensional (2-D) electron gas (2-DEG) under the ohmics. Etch depths were measured by atomic force microscopy (AFNI). The contact resistance decreased from about 0.45 Ohmmm for unetched ohmics to a minimum of 0.27 Ohmmm for 70 A etched ohmics. The initial thickness of the AlGaN layer was 250 Angstrom. The decrease in contact resistance, without excessive complications on device processing, supports RIE etching as a vi able solution to improve ohmic contact resistance in AlGaN/GaN HEMTs.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available