Removal of fragrance materials during US and European wastewater treatment

The concentrations and removals of 16 fragrance materials (FMs) were measured in 17 U.S. and European wastewater treatment plants between 1997 and 2000 and were compared to predicted values. The average FM profile and concentrations in U.S. and European influent were similar. The average FM profile,in primary effluent was similar. to the average influent profile; however, the concentration of FMs was reduced by 14.6-50.6% in primary effluent. The average FM profile in final effluent was significantly different from the primary effluent profile and was a function of the design of the wastewater treatment plant. In general, the removal of sorptive, nonbiodegradable FMs was correlated with the removal of total suspended solids in the plant, while the removal of nonsorptive, biodegradable FMs was correlated with 5-day Biological Oxidation Demand removal in the plant. The overall plant removal (primary. + secondary treatment) of FMs,ranged from 87.8 to 99.9% for activated. sludge plants, 58.6-99.8% for,carousel plants, 88.9-99.9% for oxidation ditch plants, 71.3-98.6% for trickling filter plants, 80.8-99.9% for a rotating biological contactor plant, and 96.7-99.9% for lagoons. The average. concentration of FMs in final effluent ranged from the limit of quantitation (1-3 ng/L) to 8 mug/L. Measured FM removal and concentrations were compared to predicted values, which were based on industry volume, per capita water use, octanol-water partition coefficient, and biodegradability.