Journal
AIAA JOURNAL
Volume 40, Issue 9, Pages 1708-1716Publisher
AMER INST AERONAUTICS ASTRONAUTICS
DOI: 10.2514/2.1864
Keywords
-
Categories
Ask authors/readers for more resources
Direct numerical simulation has been carried out for turbulent flow over a rectangular trailing edge at a Reynolds number of 1 X 10(3) (based on the freestream quantities and the trailing-edge thickness) and ratio of boundary-layer displacement thickness to trailing-edge thickness close to unity. Two types of flow control were studied: base transpiration and secondary splitter plate. Simulation of base transpiration was performed using different slit heights and volume flow rates. It was found that even small flow rates could produce significant changes in overall aerodynamic performance, measured, for example, by the base pressure coefficient. It was also found that for the same volume flow rate, a greater increase in base pressure (drag reduction) was obtained by blowing slowly through a wide slit rather than quickly through a narrow slit. The effectiveness of a secondary splitter plate located on the trailing-edge centerline was investigated by varying the plate length from one to five times the trailing-edge thickness. A significant increase in the base pressure coefficient (about 25%) was achieved, even with the shortest splitter plate equal to the trailing-edge thickness. The base pressure coefficient increased monotonically with the splitter plate length, and no intermediate maximum value was found.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available