Discrete particle simulation of solids motion in a gas-solid fluidized bed

The solids motion in a gas-solid fluidized bed was investigated via discrete particle simulation. The motion of individual particles in a uniform particle system and a binary particle system was monitored by the solution of the Newton's second law of motion. The force acting on each particle consists of the contact force between particles and the force exerted by the surrounding fluid. The contact force is modeled by using the analogy of spring, dash-pot and friction slider. The flow field of gas was predicted by the Navier-Stokes equation. The solids distribution is non-uniform in the bed, which is very diluted near the center but high near the wall. It was also found that there is a single solids circulation cell in the fluidized bed with ascending at the center and descending near the wall. This finding agrees with the experimental results obtained by Moslemian. The effects of the operating conditions, such as superficial gas velocity, particle size, and column size on the solids movement, were investigated. In the fluidized bed containing uniform particles better solids mixing was found in the larger bed containing smaller size particles and operated at higher superficial gas velocity. In the system containing binary particles, it was shown that under suitable conditions the particles in a fluidized bed could be. made mixable or non-mixable depending on the ratios of particle sizes and densities. Better mixing of binary particles was found in the system containing particles with less different densities and closer sizes. These results were found to follow the. mixing and segregation criteria obtained experimentally by Tanaka et al. (C) 2003 Elsevier Science Ltd. All rights reserved.