Thrust ramp geometry and spurious rotations of paleomagnetic vectors

Interaction of deformation axes during pure translation of a hanging-wall over a footwall composed by frontal and oblique ramps is carefully evaluated together with the evolution of associated paleomagnetic vectors. Four different cases are distinguished on the basis of the deflection on the paleomagnetic vectors when the bedding correction is applied during the restoration process. Two cases (frontal and oblique ramp without mutual interaction) do not produce any deflection. But two cases in the transition zone between both ramps will undergo non-coaxial axis of tilting during progressive deformation. One of them will produce spurious rotation if the bedding correction is applied. These errors will affect the oroclinal bending diagram as well as the fold test producing an apparent oroclinality and an apparent syn-folding magnetization respectively. A well-known geometry and kinematics of the thrust system is needed to properly restore the beds (and vectors) and to avoid the spurious rotations and its collateral effects in paleomagnetic investigations. A paleomagnetic study in the Pyrenean External Sierras is shown as an example. Primary Eocene vectors underwent a clockwise rotation (40degrees about) during the emplacement of the South Pyrenean sole thrust, however the Rasal-Gabardiella system of oblique ramps display spurious rotations ranging from -8degrees up to 13degrees if the inappropriate bedding correction is performed.