4.7 Article

Hardness and toughness of hot pressed ZrB2-SiC composites consolidated under relatively low pressure

Journal

JOURNAL OF ALLOYS AND COMPOUNDS
Volume 619, Issue -, Pages 481-487

Publisher

ELSEVIER SCIENCE SA
DOI: 10.1016/j.jallcom.2014.09.006

Keywords

Composite materials; Sintering; Mechanical properties; Scanning electron microscopy; Metallography; Microstructure

Funding

  1. Advanced Ceramic Research Group, University of Tabriz, Iran

Ask authors/readers for more resources

ZrB2-based composites, containing 15, 20, 25, and 30 vol% SiC, have been prepared by hot pressing at temperatures of 1700, 1850 and 2000 degrees C for 30 min under a relatively low pressure of 10 MPa. Densification and mechanical properties of ZrB2-SiC composites have been investigated. Fully dense ZrB2-30 vol% SIC composite with a relative density of 99.8% is obtained at 2000 degrees C. The highest values of Vickers hardness (21.3 GPa) and fracture toughness (4.7 MPa m(1/2)) belong to this sample. Vickers hardness increases exponentially as the relative density of composite increases. A simplified equation was developed for the Vickers hardness of the investigated ZrB2-SiC composites as a function of relative density and SiC content. Microstructural investigation by means of optical and scanning electron microscopy shows that by addition of SiC particles, some toughening mechanisms such as crack deflection, crack branching, microcracking, crack bridging, break of large SiC grains, and crack arresting by porosity are appeared. (C) 2014 Elsevier B.V. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available