The tidal regime of Shark Bay, Western Australia

A non-linear hydrodynamic model is used to describe the tidal dynamics of Shark Bay, Western Australia. The model is forced by tidal elevations generated by M-2, S-2, K-1, and O-1 constituent data at the open boundaries. The absence of suitable boundary data required a 'calibration' of the boundary condition against the known constituent data from within the model domain. The model provides a good match to the available field data, and allows the surface-level and current response to be resolved over the entire domain. Due to a near quarter-wave resonance of the semi-diurnal tide along the eastern Hopeless Reach, which increases the semi-diurnal tide by a factor of 2, the tidal characteristics on each of the Reaches are different: on the eastern Hopeless Reach the tides are mainly semi-diurnal while on the western Freycinet Reach the tides are mainly diurnal. The tidal range is also higher along Hopeless Reach. Tidal harmonics, generated by non-linearity, are important in the shallow regions. The tidal wave is shown to propagate as a progressive wave into the Bay. Substantial phase-lag, attenuation and dissipation occur over the Faure Sill, a major shallow region of the eastern reach of the Bay. Non-linear generation of the M-4 and MS4 tides is also significant in this region. Depth-averaged residual Currents are presented, which show a tidally generated circulation that is enhanced in regions of complex topography. Estimates of tidal dissipation indicate that although the total dissipation is small on a global scale, the areal average is comparable with the Gulf of Carpentaria and approximately one-quarter of the value estimated for the Patagonian Shelf. (C) 2003 Elsevier Ltd. All rights reserved.