Combined effects of mineral admixtures and curing conditions on the sorptivity coefficient of concrete

The effect of mineral admixture and curing condition on the sorptivity of concrete are investigated. In the present work, the maximum particle size and the grading of coarse aggregate, the cement content and water/cement ratio of the concrete are kept constant. Then, in the ordinary Portland cement (OPC) 42.5 concrete, a portion of the sand is replaced by a mineral admixture such as fly ash (FA), limestone filler, sandstone filler or silica fume (SF). This paper presents the results of both the sorptivity coefficient and the compressive strength of OPC 42.5 concretes with these mineral admixtures, and concretes with OPC 32.5, blended cement (BC) or trass cement (TC). The results obtained indicate that the sorptivity coefficient of concrete decreases as the compressive strength of concrete increases. It is also shown that the sorptivity coefficient of concrete is very sensitive to the curing condition. The effect of curing condition on the sorptivity coefficient of concrete seems to be higher in low-strength concretes. (C) 2003 Elsevier Ltd. All rights reserved.