Experimental study of thermal effects on the mechanical behaviour of a clay

The paper presents the results of an experimental study of thermal effects on the mechanical behaviour of a saturated clay. The study was performed on CM clay (Kaolin) using a temperature-control led triaxial apparatus. Applied temperatures were between 22 and 90degreesC. A comprehensive experimental program was carried out, including: (i) triaxial shear tests at ambient and high temperatures for different initial overconsolidation ratios; (ii) consolidation tests at ambient and high temperatures; and (iii) drained thermal heating for different initial overconsolidation ratios. The obtained results provide observations concerning a wide scope of the thermo-mechanical behaviour of clays. Test results obtained at 90degreesC were compared with tests performed at ambient temperature. Based on these comparisons, thermal effects on a variety of features of behaviour are presented and discussed. Focus is made on: (i) induced thermal volume change during drained heating; (ii) experimental evidence of temperature influence on preconsolidation pressure and on compressibility index; (iii) thermal effects on shear strength and critical state; and (iv) thermal effects on elastic modulus. Thermal yielding is discussed and yield limit evolution with temperature is presented. The directions of the induced plastic strains are also discussed. Several remarks on the difference in the mechanical behaviour at ambient and high temperatures conclude the paper. Copyright (C) 2004 John Wiley Sons, Ltd.