Toxicity of the 13 priority pollutant metals to Vibrio fisheri in the Microtox® chronic toxicity test

The Microtox(R) Acute Toxicity Test has been successfully used to measure the toxicity of metals and other pollutants at high concentrations (ppm) in selected environmental samples. However, metals and other toxicants are often found in much lower concentrations (ppb) in many municipal wastewaters and receiving waters. In order to assess the toxicity of these pollutants in these samples, a more sensitive toxicity assay is needed. The Microtox(R) chronic toxicity test has been developed to measure the sublethal effect of toxicants over multiple generations of the test species, Vibrio fisheri. In this study, the toxicity of the 13 priority pollutant metals [i.e. As, Se, Cd, Cr (III and VI), Cu, Pb, Sb, Ag, Tl, Zn, Be, Hg and Ni] to V fisheri was evaluated using the Microtox(R) chronic toxicity test. In this test, the inhibitory concentration (IC), lowest observable effect concentration (LOEC), and no observable effect concentration (NOEC) were obtained after 22-h of incubation at 27 +/- 1 degreesC, by comparing the light output of the control to that of the test sample. Among the 13 priority pollutant metals, beryllium (Be) was found to be the most toxic in the test (LOEC = 0.742-1.49 mug/l) while thallium (Tl) was the least toxic (LOEC = 3840-15300 mug/l). The LOECs for copper (as Cu) and lead (Pb) in reagent (ASTM Type I) water were 6.78-13.6 mug/l and 626-1251 mug/l, respectively. The toxicity of copper sulfate (as Cu) in reagent water was shown and significantly reduced with the addition of natural organic matter (fulvic acid) or EDTA to the sample. The LOEC values for the 13 priority pollutant metals in this test were comparable to or lower than those reported for commonly used aquatic toxicity tests, such as the Ceriodaphnia dubia assay. (C) 2003 Elsevier Science B.V. All rights reserved.