Compressive response and failure of braided textile composites: Part 1 - experiments

Experimental results obtained by examining the planar biaxial compression/tension response of carbon 2D triaxial braided composites (2DTBC) are reported in this paper. These experiments were motivated by a need to examine the failure of 2DTBC in a state of stress that would be similar to what is experienced by the walls of a tubular member under compressive crush loads. Results obtained from a series of biaxial tests that were conducted with different proportional displacement loading ratio combinations of compression and tension are reported. In all cases, the dominant failure mechanism under such a stress state is the buckling of the bias and axial tows within the composite. Full field surface displacement data is acquired concurrently during all biaxial and some uniaxial tests using the technique of digital speckle photography. Digital images of the specimen surface that is illuminated with a He-Ne laser are acquired at discrete time intervals during the loading history using a high-resolution digital camera. These images are stored and analyzed to obtain the incremental inplane surface displacement field, Deltau(x, y) and Deltav(x, y). From these, the incremental inplane surface strains Deltaepsilon(x), Deltaepsilon(y) and Deltagamma(xy) are obtained by numerical differentiation. The present paper, which is the first in a two part series, is devoted to the biaxial experimental results pertaining to 2DTBC failure. (C) 2003 Elsevier Ltd. All rights reserved.