Structural optimization and experimental investigation of supersonic ejectors for boosting low pressure natural gas

The supersonic ejector was introduced into boosting the production of low pressure natural gas wells. The energy of high pressure gas wells. which was usually wasted through choke valves, was used as its power supply to boost the low gas production. The operating performance of natural gas ejectors was determined not only by the operating parameters but also by the structural parameters. This study focused on the structural optimization and operating performance of natural gas ejectors. The optimal structural parameters were obtained by numerical simulation when the maximum pressure ratio was obtained, and the numerical results were validated by experimental investigation. The numerical results showed that the optimal diameter ratio of mixing tube to primary nozzle throat was 1.6, the optimal length to diameter ratio of mixing tube was 4.0 and the optimal inclination angle of mixing chamber was 28 degrees. The entrainment ratios and pressure ratios from the numerical simulation agreed well with the field experimental data, with the maximum value of pressure ratio up to 60%. The operating performance of the supersonic ejector was also investigated by the field experiment, and the results showed that the induced gas flowrate and entrainment ratio showed nonlinear characteristics with peak values when the motive pressure ranged from 8 MPa to 13 MPa. These experimental results have proved the optimized structural parameters of the supersonic ejector. The investigation will help to the further application in boosting natural gas production of supersonic ejector. (C) 2009 Elsevier Ltd. All rights reserved.