A constraint-based operation sequencing for a knowledge-based process planning

Process planning is a decision-making process. Decisions on machining operations for a particular feature have to be made on various independent conditions such as which operation should be performed with which tools and under what cutting parameters. An integrated knowledge-based CAPP system called ProPlanner has been developed. The system has five modules namely information acquisition, feature recognition, machining operation planning and tool selection, set-up planning, and operation sequencing. Most process-planning systems do not produce alternative process plans. Usually, a fixed sequence created by a process plan is not necessarily the best possible sequence. Therefore, the aim should be to generate all possible operation sequences and use some optimality criteria to obtain the best sequence for the given operating environment. This paper presents an efficient heuristic algorithm, belongs to the system's operation sequencing module, for finding near-optimal operation sequences from all available process plans in a machining set-up. The costs of the various machining schemes are calculated and the machining scheme with the lowest cost is chosen. All feasible cutting tools are identified for each particular feature and the corresponding machining operations. This process is repeated for all the features in the machining set-up. All possible feature sequence combinations allowed by the current feature constraints are then generated. Appropriate cutting tools are identified and assigned to different operations. The feature sequence with the smallest number of tool changes is adopted.