Related references
Note: Only part of the references are listed.Poor Short Term Outcome with a Metal-On-Metal Total Hip Arthroplasty
Yadin D. Levy et al.
JOURNAL OF ARTHROPLASTY (2013)
Nanomechanical and Wear Behavior of Microtextured Carbide-Coated CoCrMo Alloy Surfaces
Geriel A. Ettienne-Modeste et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2013)
The clinical implications of elevated blood metal ion concentrations in asymptomatic patients with MoM hip resurfacings: a cohort study
David J. Langton et al.
BMJ OPEN (2013)
Deposition of TiC film on titanium for abrasion resistant implant material by ion-enhanced triode plasma CVD
Yuhe Zhu et al.
APPLIED SURFACE SCIENCE (2012)
Pseudotumors Are Common in Well-positioned Low-wearing Metal-on-Metal Hips
Ashley K. Matthies et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2012)
Do Survival Rate and Serum Ion Concentrations 10 Years After Metal-on-Metal Hip Resurfacing Provide Evidence for Continued Use?
Albrecht Hartmann et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2012)
A review of hip resurfacings revised for unexplained pain
Gulraj S. Matharu et al.
HIP INTERNATIONAL (2012)
Hip Resurfacing With the Biomet Hybrid ReCap-Magnum System 7-Year Results
Thomas P. Gross et al.
JOURNAL OF ARTHROPLASTY (2012)
Ultrasound Screening of Periarticular Soft Tissue Abnormality Around Metal-on-Metal Bearings
Takashi Nishii et al.
JOURNAL OF ARTHROPLASTY (2012)
Disappointing Short-Term Results With the DePuy ASR XL Metal-on-Metal Total Hip Arthroplasty
Nicholas M. Bernthal et al.
JOURNAL OF ARTHROPLASTY (2012)
Wear of Polyethylene Against Oxidized Zirconium Femoral Components Effect of Aggressive Kinematic Conditions and Malalignment in Total Knee Arthroplasty
Kace A. Ezzet et al.
JOURNAL OF ARTHROPLASTY (2012)
The effect of diffusion hardened oxidized zirconium wear debris on cell viability and inflammation-An in vitro study
S. F. Rose et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2012)
High incidence of pseudotumour formation after large-diameter metal-on-metal total hip replacement A PROSPECTIVE COHORT STUDY
B. H. Bosker et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2012)
Metal-on-metal hip arthroplasty GOING, GOING, GONE ... - AFFIRMS
K. R. Berend et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2012)
Adverse reactions to metal debris: histopathological features of periprosthetic soft tissue reactions seen in association with failed metal on metal hip arthroplasties
Sonali Natu et al.
JOURNAL OF CLINICAL PATHOLOGY (2012)
Magnetic resonance imaging of the postoperative hip
Catherine L. Hayter et al.
JOURNAL OF MAGNETIC RESONANCE IMAGING (2012)
Five-Year Comparison of Oxidized Zirconium and Cobalt-Chromium Femoral Components in Total Knee Arthroplasty A Randomized Controlled Trial
Catherine Hui et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2011)
Accelerating failure rate of the ASR total hip replacement
D. J. Langton et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2011)
The Future of Hip Resurfacing
Thomas P. Schmalzried
ORTHOPEDIC CLINICS OF NORTH AMERICA (2011)
Catastrophic failure due to aggressive metallosis 4 years after hip resurfacing in a woman in her forties-a case report
Thord von Schewelov et al.
ACTA ORTHOPAEDICA (2010)
Arthroprosthetic Cobaltism: Neurological and Cardiac Manifestations in Two Patients with Metal-on-Metal Arthroplasty A Case Report
Stephen S. Tower
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2010)
Early failure of metal-on-metal bearings in hip resurfacing and large-diameter total hip replacement A CONSEQUENCE OF EXCESS WEAR
D. J. Langton et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2010)
Effect of titanium carbide coating by ion plating plasma-assisted deposition on osteoblast response: A chemical, morphological and gene expression investigation
Giovanni Longo et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Clinical Comparison of Polyethylene Wear with Zirconia or Cobalt-Chromium Femoral Heads
Maiken Stilling et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2009)
What Is a Normal Wear Pattern for Metal-on-Metal Hip Bearings?
J. G. Bowsher et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2009)
The Epidemiology of Revision Total Hip Arthroplasty in the United States
Kevin J. Bozic et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2009)
Ceramic-on-metal bearings in total hip replacement WHOLE BLOOD METAL ION LEVELS AND ANALYSIS OF RETRIEVED COMPONENTS
G. H. Isaac et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2009)
Ceramic Materials as Bearing Surfaces for Total Hip Arthroplasty
James A. D'Antonio et al.
JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS (2009)
Metal–Metal Bearing Surfaces in Hip Arthroplasty
Thomas P. Schmalzried
ORTHOPEDICS (2009)
Characterisation of fretting-induced wear debris for Ti-6Al-4 V
N. M. Everitt et al.
WEAR (2009)
Surface Damage After Multiple Dislocations of a 38-mm-Diameter, Metal-on-Metal Hip Prosthesis
John G. Bowsher et al.
JOURNAL OF ARTHROPLASTY (2008)
How do alternative bearing surfaces influence wear behavior?
Ian C. Clarke et al.
JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS (2008)
How has the biologic reaction to wear particles changed with newer bearing surfaces?
Joshua J. Jacobs et al.
JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS (2008)
Host response to biomaterial implants: Biological activity of prosthetic wear particles
Eileen Ingham
TOXICOLOGY (2007)
Biomedical applications of diamond-like carbon coatings: A review
Ritwik Kumar Roy et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2007)
The effect of nano- and micron-sized particles of cobalt-chromium alloy on human fibroblasts in vitro
I. Papageorgiou et al.
BIOMATERIALS (2007)
Effect of titanium carbide coating on the osseointegration response in vitro and in vivo
Marina Brama et al.
BIOMATERIALS (2007)
Compositionally graded Ti6A14V+TiC made by direct laser fabrication using powder and wire
F. Wang et al.
MATERIALS & DESIGN (2007)
Effects of orthopaedic wear particles on osteoprogenitor cells
Stuart B. Goodman et al.
BIOMATERIALS (2006)
Metal-on-metal hip simulator study of increased wear particle surface area due to 'severe' patient activity
JG Bowsher et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2006)
Tribological principles in metal-on-metal hip joint design
D Dowson
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2006)
Combined influences of mechanical properties and surface roughness on the tribological properties of amorphous carbon coatings
N Fujisawa et al.
WEAR (2006)
The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact
A Kovalchenko et al.
TRIBOLOGY INTERNATIONAL (2005)
Review of engineered tribological interfaces for improved boundary lubrication
A Erdemir
TRIBOLOGY INTERNATIONAL (2005)
Alumina hip joints characterized by run-in wear and steady-state wear to 14 million cycles in hip-simulator model
H Oonishi et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2004)
Hardness of electron beam deposited titanium carbide films on titanium substrate
D Ferro et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Adhesion properties of functionally gradient diamond composite films on medical and tool alloys
RJ Narayan
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2004)
Failure micromechanisms during uniaxial tensile fracture of conventional and highly crosslinked ultra-high molecular weight polyethylenes used in total joint replacements
SJ Gencur et al.
BIOMATERIALS (2003)
Reduction of wear in total hip replacement prostheses by amorphous diamond coatings
R Lappalainen et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2003)
A laser surface textured parallel thrust bearing
V Brizmer et al.
TRIBOLOGY TRANSACTIONS (2003)
Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water
XL Wang et al.
TRIBOLOGY INTERNATIONAL (2003)
Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact
M Wakuda et al.
WEAR (2003)
Nanometric chromium/chromium carbide multilayers for tribological applications
J Romero et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Influence of surface texture on boundary lubricated sliding contacts
U Pettersson et al.
TRIBOLOGY INTERNATIONAL (2003)
Wear behavior of carbide coated Co-Cr-Mo implant alloy
NS Vandamme et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2003)
Tribological study of lubricious DLC biocompatible coatings
M Brizuela et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2002)
Ion release in patients with metal-on-metal hip bearings in total joint replacement: A comparison with metal-on-polyethylene bearings
L Savarino et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Interaction of oxidation and crosslinking in gamma-irradiated ultrahigh molecular-weight polyethylene
FW Shen et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Thermomechanical behavior of virgin and highly crosslinked ultra-high molecular weight polyethylene used in total joint replacements
SM Kurtz et al.
BIOMATERIALS (2002)
Alumina-alumina artificial hip joints. Part II: Characterisation of the wear debris from in vitro hip joint simulations
JL Tipper et al.
BIOMATERIALS (2002)
Alumina-alumina artificial hip joints. Part I: a histological analysis and characterisation of wear debris by laser capture microdissection of tissues retrieved at revision
A Hatton et al.
BIOMATERIALS (2002)
Improving diamond-metal adhesion with graded TiCN interlayers
CQ Sun et al.
JOURNAL OF APPLIED PHYSICS (2002)
An in vitro study of the reduction in wear of metal-on-metal hip prostheses using surface-engineered femoral heads
J Fisher et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2002)
Carbon turns the tensile surface stress of Ti to be compressive
YQ Fu et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2001)
Characterisation of wear debris from UHMWPE on zirconia ceramic, metal-on-metal and alumina ceramic-on-ceramic hip prostheses generated in a physiological anatomical hip joint simulator
JL Tipper et al.
WEAR (2001)
A novel low wearing differential hardness, ceramic-on-metal hip joint prosthesis
PJ Firkins et al.
JOURNAL OF BIOMECHANICS (2001)
Wear of HIPed and non-HIPed alumina-alumina hip joints under standard and severe simulator testing conditions
JE Nevelos et al.
BIOMATERIALS (2001)
Wear simulation of total hip prostheses with polyethylene against CoCr, alumina and diamond-like carbon
V Saikko et al.
BIOMATERIALS (2001)
In-situ synthesis and wear performance of TiC particle reinforced composite coating on alloy Ti6Al4V
S Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2001)
Mixed oxides prosthetic ceramic ball heads.: Part 3:: effect of the ZrO2 fraction on the wear of ceramic on ceramic hip joint prostheses.: A long-term in vitro wear study
S Affatato et al.
BIOMATERIALS (2001)
A novel method of cross-linking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties - Recipient of the 1999 HAP Paul Award
OK Muratoglu et al.
JOURNAL OF ARTHROPLASTY (2001)
Properties of crosslinked ultra-high-molecular-weight polyethylene
G Lewis
BIOMATERIALS (2001)
In situ formation of titanium carbide in titanium powder compacts by gas-solid reaction
YJ Kim et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Nanocomposite TiC/a-C:H hard coatings deposited by reactive PVD
T Zehnder et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Extensive metallosis and necrosis in failed prostheses with cemented titanium-alloy stems and ceramic heads
L Milosev et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2000)
Tribological properties of composite Ti(N,O,C) coatings containing hard amorphous carbon layers
A Stanishevsky et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Wear behaviour and surface form evolution of a novel titanium carbide implanted surface under lubricated conditions
DI Fletcher et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2000)
Biological reactions to wear debris in total joint replacement
E Ingham et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2000)
A comparative joint simulator study of the wear of metal-on-metal and alternative material combinations in hip replacements
AAJ Goldsmith et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2000)
Ultra-low wear rates for rigid-on-rigid bearings in total hip replacements
IC Clarke et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2000)
Share Paper
