Potentiometric Cr(VI) selective electrode based on novel ionophore-immobilized PVC membranes

For the determination of Cr(VI) concentrations with a potentiometric ion-selective electrode (ISE), ionophore-immobilized membranes were prepared by ultraviolet (UV)-induced graft polymerization followed by chemical treatment. Novel ionophores comprising various amine structures were immobilized onto poly(vinyl chloride) (PVC) matrixes, and these were examined to determine Cr(VI) selectively. Of the three ionophores examined in this study, the membranes with N,N,N,N-tetrakis(3-aminopropyl)-1,4-butanediamine (DABAm4) exhibited the highest Cr(VI) ion selectivity in both extraction and potentiometry experiments. The plasticizer in the membrane was optimized as 1.0ml o-nitrophenyl octyl ether (NPOE)/g PVC to form diffusible channels. The potentiometric studies revealed that the performance of DABAm4-immobilized PVC was equivalent to that of mobile ionophores in supported liquid membranes (SLMs). A reproducible response of Cr(VI) was attained within a response time of 1 s in the range of 2.16 x 10(-6) to 0.1 M, using the membrane prepared in this study. The selectivity for the Cr(VI) ion against the other interfering ions was compared reasonably between a solvent extraction and potentiometry. The long-term response of the Cr(VI) ISE showed slight deterioration over a continuous operation for 6 months, while the detection limit slightly decreased due to the leaching-out of the plasticizer. The ISE along with the DABAm4 immobilized membrane showed a higher Cr(VI) ion selectivity and more stable response under long-term usage than ISEs with typical SLMs. (c) 2005 Elsevier B.V. All rights reserved.