Machining of austenitic stainless steels using CVD multi-layer coated cemented carbide tools

This paper presents the results of experimental work in dry turning of austenitic stainless steels (AISI 304 and AISI 316) using CVD multilayer coated cemented carbide tools. The turning tests were conducted at four different cutting speeds (120, 150, 180 and 210 m/min) while feed rate and depth of cut were kept constant at 0.16 mm/rev and 1 min, respectively. The cutting tools used were TiC/TiCN/TiN and TiCN/TiC/Al2O3 coated cementide carbides. The influences of cutting speed, cutting tool coating top layer and workpiece material were investigated on the machined surface roughness and the cutting forces. The worn parts of the cutting tools were also examined under scanning electron microscope (SEM). The results showed that cutting speed significantly affected the machined surface roughness values. With increasing cutting speed, the surface roughness values decreased until a minimum value is reached beyond which they increased. (c) 2005 Elsevier Ltd. All rights reserved.