Characterization of surface properties of a solid plate using nonlinear Lamb wave approach

A nonlinear Lamb wave approach is presented for characterizing the surface properties of a solid plate. This characterization approach is useful for some practical situations where ultrasonic transducers cannot touch the surfaces to be inspected, e. g. the inside surfaces of sealed vessels. In this paper, the influences of changes in the surface properties of a solid plate on the effect of second-harmonic generation by Lamb wave propagation were analyzed. A surface coating with the different properties was used to simulate changes in the surface properties of a solid plate. When the areas and thicknesses of coatings on the surface of a given solid plate changed, the amplitude-frequency curves both of the fundamental waves and the second harmonics by Lamb wave propagation were measured under the condition that Lamb waves had a strong nonlinearity. It was found that changes in the surface properties might clearly affect the efficiency of second-harmonic generation by Lamb wave propagation. The Stress Wave Factors (SWFs) in acousto-ultrasonic technique were used for reference, and the definitions of the SWFs of Lamb waves were introduced. The preliminary experimental results showed that the second-harmonic SWFs of Lamb wave propagation could effectively be used to characterize changes in the surface properties of the given solid plate. (c) 2006 Elsevier B. V. All rights reserved.