4.5 Article

Alum residuals as a low technology for phosphorus removal from aquaculture processing water

Journal

AQUACULTURAL ENGINEERING
Volume 36, Issue 3, Pages 233-238

Publisher

ELSEVIER SCI LTD
DOI: 10.1016/j.aquaeng.2006.12.003

Keywords

BOD5; alum residuals; fixed bed column test; Freundlich isotherm; Langmuir isotherm

Ask authors/readers for more resources

Aquaculture process waters are often scrutinized for loading phosphorus discharges into surface water. With the growing regulatory control of discharge from aquaculture process industries, it has become very important to address low cost and effective technological solution for aquaculture facilities. This study aims to investigate the effectiveness of alum residuals, which were generated during drinking water treatment for adsorption of phosphorus from aquaculture process water. Alum residuals were dried using an oven at 105 degrees C for 24 h. Particle size (d(60)) was similar to conventional adsorbent, granular activated carbon. Bench scale experiments (batch and fixed bed column tests) were conducted using oven dried alum residuals. Fixed bed column tests also looked at the effect of influent pH on the effectiveness of oven dried alum residuals. Experimental results observed phosphorus removal of 94-99% using an alum residuals concentration of 4-16 g/L. Freundlich adsorption isotherm was effective in explaining partitioning among solid and liquid phases. Oven dried alum residuals were a better adsorbent for orthophosphate phosphorus than total phosphorus. Effluent pH levels for both batch and fixed bed column tests were within range of 6-9 for most of the samples tested and therefore, suitable for surface water disposal. There were no effects of pH observed on the breakthrough pore volume processed during fixed bed column test. There was aluminum leaching from oven dried alum residuals, however, not high enough to cause toxicity for aquatic species if disposed in surface water. Oven dried alum residuals were also able to adsorb organic matter from aquaculture process water. The effluent BOD5 was below 30 mg/L for most of the samples with an exception of a few samples where BOD5 was beyond the limit for surface water disposal guidelines. The results indicated that oven dried alum residuals have potential to provide a technological solution for small aquaculture facilities. (c) 2007 Elsevier B.V. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.5
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available