Investigation of water absorption in pultruded composites containing fillers and low profile additives

This work investigates the humidity absorption process in the polyester/glass fiber composite materials containing fillers and low profile additives. These composite materials were exposed to both distilled and sea water at different temperatures. The moisture diffusivity and the moisture equilibrium reached by these composites were determined using the gravimetric test method and their humidity distribution profile across the thickness direction was characterized using the microtome technique. The obtained results indicate that the distilled water diffuses in all composites much more rapidly than the sea water, particularly at high immersion temperatures. However, the opposite is observed at low immersion temperature (5 degrees C), since at this temperature the distilled water is almost in its icy state. For high immersion temperatures, a mass loss of the aged specimen in the sea water was observed 2 months after the first immersion. Such behavior was not observed during the immersion in the distilled water. Moreover, it is observed that the water absorption is higher in the composite materials containing low profile additives. This behavior is explained in terms of microvoids formation promoted by low profile additives. The microtome technique reveals clearly that the humidity profile across the thickness of the aged specimen follows a parabolic trend with a maximum at the outside surface of that specimen and a minimum at its center. These experimental results were found to confirm the theory.