Related references
Note: Only part of the references are listed.Polycaprolactone-based fused deposition modeled mesh for delivery of antibacterial agents to infected wounds
Erin Yiling Teo et al.
BIOMATERIALS (2011)
A study on micro-hole machining of polycrystalline diamond by micro-electrical discharge machining
D. Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
New family of fluorinated polymer chips for droplet and organic solvent microfluidics
Stefano Begolo et al.
LAB ON A CHIP (2011)
What Comes Next?
George M. Whitesides
LAB ON A CHIP (2011)
Maskless writing of microfluidics: Rapid prototyping of 3D microfluidics using scratch on a polymer substrate
Jaephil Do et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2011)
Norland optical adhesive (NOA81) microchannels with adjustable wetting behavior and high chemical resistance against a range of mid-infrared-transparent organic solvents
Ph Waegli et al.
SENSORS AND ACTUATORS B-CHEMICAL (2011)
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Karina Arcaute et al.
ACTA BIOMATERIALIA (2010)
Fabrication of Versatile Channel Flow Cells for Quantitative Electroanalysis Using Prototyping
Michael E. Snowden et al.
ANALYTICAL CHEMISTRY (2010)
Print-and-Peel Fabrication for Microfluidics: What's in it for Biomedical Applications?
Marlon S. Thomas et al.
ANNALS OF BIOMEDICAL ENGINEERING (2010)
Production of microstructures in wide-band-gap and organic materials using pulsed laser ablation at 157 nm wavelength
Falk Haehnel et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2010)
Multilayer microfluidic PEGDA hydrogels
Michael P. Cuchiara et al.
BIOMATERIALS (2010)
Micro-macro hybrid soft-lithography master (MMHSM) fabrication for lab-on-a-chip applications
Jaewon Park et al.
BIOMEDICAL MICRODEVICES (2010)
An integrated disposable device for DNA extraction and helicase dependent amplification
Madhumita Mahalanabis et al.
BIOMEDICAL MICRODEVICES (2010)
A Flow Microreactor System Enables Organolithium Reactions without Protecting Alkoxycarbonyl Groups
Aiichiro Nagaki et al.
CHEMISTRY-A EUROPEAN JOURNAL (2010)
Toner and paper-based fabrication techniques for microfluidic applications
Wendell Karlos Tomazelli Coltro et al.
ELECTROPHORESIS (2010)
Heterogeneous catalytic synthesis using microreactor technology
Christopher G. Frost et al.
GREEN CHEMISTRY (2010)
Multi-material microstereolithography
Jae-Won Choi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Micro- and Nano-Scale Fabrication of Fluorinated Polymers by Direct Etching Using Focused Ion Beam
Naoyuki Fukutake et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2010)
Micromachining SU-8 pivot structures using AZ photoresist as direct sacrificial layers for a large wing displacement
X. Q. Bao et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2010)
Microflow reactor synthesis of palladium nanoparticles stabilized with poly(benzyl ether) dendron ligands
Kanjiro Torigoe et al.
JOURNAL OF NANOPARTICLE RESEARCH (2010)
The Power of Thiol-ene Chemistry
Matthew J. Kade et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2010)
Rapid prototyping of PMMA microfluidic chips utilizing a CO2 laser
Ting-Fu Hong et al.
MICROFLUIDICS AND NANOFLUIDICS (2010)
On-chip electro membrane extraction
Nickolaj Jacob Petersen et al.
MICROFLUIDICS AND NANOFLUIDICS (2010)
Cyclic olefin polymers: emerging materials for lab-on-a-chip applications
Pedro S. Nunes et al.
MICROFLUIDICS AND NANOFLUIDICS (2010)
Fabrication of metallic micromolds by laser and electro-discharge micromachining
Pun-Pang Shiu et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2010)
Corona discharge assisted thermal bonding of polymer microfluidic devices
Sum Huan Ng et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2010)
Lost in translation
Holger Becker
LAB ON A CHIP (2010)
Rapid prototyping of robust and versatile microfluidic components using adhesive transfer tapes
Pulak Nath et al.
LAB ON A CHIP (2010)
Polypropylene CD-organic light-emitting diode biosensing platform
Srikanth Vengasandra et al.
LAB ON A CHIP (2010)
One size fits all?
Holger Becker
LAB ON A CHIP (2010)
Rapid prototyping of microfluidic devices for integrating with FT-IR spectroscopic imaging
K. L. Andrew Chan et al.
LAB ON A CHIP (2010)
Low-temperature, simple and fast integration technique of microfluidic chips by using a UV-curable adhesive
Rerngchai Arayanarakool et al.
LAB ON A CHIP (2010)
Centrifugal microfluidic system for primary amplification and secondary real-time PCR
Maximilian Focke et al.
LAB ON A CHIP (2010)
Shrink film patterning by craft cutter: complete plastic chips with high resolution/high-aspect ratio channel
Douglas Taylor et al.
LAB ON A CHIP (2010)
Low-cost rapid prototyping of flexible microfluidic devices using a desktop digital craft cutter
Po Ki Yuen et al.
LAB ON A CHIP (2010)
Millimeter-scale contact printing of aqueous solutions using a stamp made out of paper and tape
Chao-Min Cheng et al.
LAB ON A CHIP (2010)
A unified approach to dielectric single cell analysis: Impedance and dielectrophoretic force spectroscopy
Ana Valero et al.
LAB ON A CHIP (2010)
High-speed multiphoton absorption polymerization: fabrication of microfluidic channels with arbitrary cross-sections and high aspect ratios
George Kumi et al.
LAB ON A CHIP (2010)
A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips
Mengying Zhang et al.
LAB ON A CHIP (2010)
Print-and-Peel Fabricated Passive Micromixers
Marlon S. Thomas et al.
LANGMUIR (2010)
Three-dimensional femtosecond laser micromachining of photosensitive glass for biomicrochips
Koji Sugioka et al.
LASER & PHOTONICS REVIEWS (2010)
Influence of Type of Initiation on Thiol-Ene Click Chemistry
Mustafa Uygun et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2010)
Medical prototyping using two photon polymerization
Roger J. Narayan et al.
MATERIALS TODAY (2010)
NOA 63 as a UV-curable material for fabrication of microfluidic channels with native hydrophilicity
Emile P. Dupont et al.
MICROELECTRONIC ENGINEERING (2010)
Ultrasonic bonding for thermoplastic microfluidic devices without energy director
Yi Luo et al.
MICROELECTRONIC ENGINEERING (2010)
The effect of phase change materials on the frontal polymerization of a triacrylate
Veronika G. Viner et al.
PHYSICA D-NONLINEAR PHENOMENA (2010)
Thiol-ene and thiol-yne chemistry in microfluidics: a straightforward method towards macroporous and nonporous functional polymer beads
R. Arun Prasath et al.
POLYMER CHEMISTRY (2010)
Microfluidic chip fabrication using hot embossing and thermal bonding of COP
Boe-Yu Pemg et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2010)
Characterisation of rapid prototyping techniques for studies in cell behaviour
P. S. Maher et al.
RAPID PROTOTYPING JOURNAL (2010)
Fused deposition modeling of patient-specific polymethylmethacrylate implants
David Espalin et al.
RAPID PROTOTYPING JOURNAL (2010)
Benchtop fabrication of PDMS microstructures by an unconventional photolithographic method
Chang Mo Hwang et al.
BIOFABRICATION (2010)
Large area direct-write focused ion-beam lithography with a dual-beam microscope
Alexandra Imre et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2010)
Development of Flow Systems by Direct-milling on Poly(methyl methacrylate) Substrates Using UV-Photopolymerization as Sealing Process
Eunice R. G. O. Rodrigues et al.
ANALYTICAL SCIENCES (2009)
Laser fabricated microchannels inside photostructurable glass-ceramic
J. M. Fernandez-Pradas et al.
APPLIED SURFACE SCIENCE (2009)
Hybrid Microfluidic Sensors Fabricated by Screen Printing and Injection Molding for Electrochemical and Electrochemiluminescence Detection
Zainab Mohammed Redha et al.
ELECTROANALYSIS (2009)
Comparison of roughness parameters for various microchannel surfaces in single-phase flow applications
Perry L. Young et al.
HEAT TRANSFER ENGINEERING (2009)
Femtosecond laser micromachining and application of hot embossing molds for microfluid device fabrication
Hae Woon Choi et al.
JOURNAL OF LASER APPLICATIONS (2009)
Fabrication of 3D biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography
Jae-Won Choi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
A full-wafer fabrication process for glass microfluidic chips with integrated electroplated electrodes by direct bonding of dry film resist
Paul Vulto et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
UV-curable PDMS-containing PU system for hydrophobic textile surface treatment
Wei-Hung Chen et al.
JOURNAL OF POLYMER RESEARCH (2009)
Micro-injection moulding of polymer microfluidic devices
Usama M. Attia et al.
MICROFLUIDICS AND NANOFLUIDICS (2009)
Lab-on-a-print: from a single polymer film to three-dimensional integrated microfluidics
Wei Wang et al.
LAB ON A CHIP (2009)
Direct projection on dry-film photoresist (DP2): do-it-yourself three-dimensional polymer microfluidics
Siwei Zhao et al.
LAB ON A CHIP (2009)
IP or no IP: that is the question
Holger Becker
LAB ON A CHIP (2009)
Print-n-Shrink'' technology for the rapid production of microfluidic chips and protein microarrays
Kevin Sollier et al.
LAB ON A CHIP (2009)
An indirect microfluidic flow injection analysis (FIA) system allowing diffusion free pumping of liquids by using tetradecane as intermediary liquid
Bastian Ernst Rapp et al.
LAB ON A CHIP (2009)
Chips, money, industry, education and the killer application''
Holger Becker
LAB ON A CHIP (2009)
It's the economy ...
Holger Becker
LAB ON A CHIP (2009)
Direct rapid prototyping of PDMS from a photomask film for micropatterning of biomolecules and cells
Hyundoo Hwang et al.
LAB ON A CHIP (2009)
Femtosecond laser rapid prototyping of nanoshells and suspending components towards microfluidic devices
Dong Wu et al.
LAB ON A CHIP (2009)
Hype, hope and hubris: the quest for the killer application in microfluidics
Holger Becker
LAB ON A CHIP (2009)
Novel Poly(dimethylsiloxane) Bonding Strategy via Room Temperature Chemical Gluing
Nae Yoon Lee et al.
LANGMUIR (2009)
Patterned Au/Poly(dimethylsiloxane) Substrate Fabricated by Chemical Plating Coupled with Electrochemical Etching for Cell Patterning
Hai-Jing Bai et al.
LANGMUIR (2009)
Metal electrodes in plastic microfluidic systems
Walter Schrott et al.
MICROELECTRONIC ENGINEERING (2009)
Developments and new applications of UV-induced surface graft polymerizations
Jianping Deng et al.
PROGRESS IN POLYMER SCIENCE (2009)
Surface acoustic wave biosensors:: a review
Kerstin Laenge et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2008)
Inkjet-printed microfluidic multianalyte chemical sensing paper
Koji Abe et al.
ANALYTICAL CHEMISTRY (2008)
Polymer Lab-on-a-Chip system with electrical detection
Holger Muehlberger et al.
IEEE SENSORS JOURNAL (2008)
Micro Flow-Through Thermocycler with Simple Meandering Channel with Symmetric Temperature Zones for Disposable PCR-Devices in Microscope Slide Format
Anett Reichert et al.
JOURNAL OF BIONIC ENGINEERING (2008)
High-resolution permanent photoresist laminate for microsystem applications
Uwe Stoehr et al.
JOURNAL OF MICRO-NANOLITHOGRAPHY MEMS AND MOEMS (2008)
Rapid fabrication of tooling for microfluidic devices via laser micromachining and hot embossing
P. P. Shiu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Stress engineering and mechanical properties of SU-8-layers for mechanical applications
J. Hammacher et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2008)
Monolithic photolithographically patterned Fluorocur (TM) PFPE membrane valves and pumps for in situ planetary exploration
Peter A. Willis et al.
LAB ON A CHIP (2008)
Microfluidic large-scale integration on a chip for mass production of monodisperse droplets and particles
Takasi Nisisako et al.
LAB ON A CHIP (2008)
Shrinky-Dink microfluidics: rapid generation of deep and rounded patterns
Anthony Grimes et al.
LAB ON A CHIP (2008)
FLASH: A rapid method for prototyping paper-based microfluidic devices
Andres W. Martinez et al.
LAB ON A CHIP (2008)
Print-and-peel fabrication of microelectrodes
Connie Hong et al.
LANGMUIR (2008)
Three-dimensional microfluidic devices fabricated in layered paper and tape
Andres W. Martinez et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)
Green-tape ceramics. New technological approach for integrating electronics and fluidics in microsystems
Nuria Ibanez-Garcia et al.
TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2008)
Thermally activated solvent bonding of polymers
S. H. Ng et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2008)
Polymer microfabrication technologies for microfluidic systems
Holger Becker et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2008)
Rapid prototyping of microfluidic systems using a laser-patterned tape
L. W. Luo et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
SU-8 as a structural material for labs-on-chips and microelectromechanical systems
Patrick Abgrall et al.
ELECTROPHORESIS (2007)
Polyurethane from biosource as a new material for fabrication of microfluidic devices by rapid prototyping
Evandro Piccin et al.
JOURNAL OF CHROMATOGRAPHY A (2007)
Simple route to hydrophilic microfluidic chip fabrication using an ultraviolet (UV)-cured polymer
So Hyun Kim et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Rapid laser prototyping of plasmonic components
C. Reinhardt et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2007)
Dynamic microfluidic photomasking
Jonathan McKechnie et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2007)
All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles
Seung H. Ko et al.
NANOTECHNOLOGY (2007)
Making polymeric micro- and nanoparticles of complex shapes
Julie A. Champion et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2007)
Versatile platform for creating gradient combinatorial libraries via modulated light exposure
Brian C. Berry et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2007)
Pesticide determination by enzymatic inhibition and amperometric detection in a low-temperature cofired ceramics microsystem
Xavier Llopis et al.
ANALYTICAL CHEMISTRY (2007)
Photosensitive poly(dimethylsiloxane) materials for microfluidic applications
Katerina Tsougeni et al.
MICROELECTRONIC ENGINEERING (2007)
3D scaffold fabrication with PPF/DEF using micro-stereolithography
Jin Woo Lee et al.
MICROELECTRONIC ENGINEERING (2007)
Lab-on-chip technologies:: making a microfluidic network and coupling it into a complete microsystem -: a review
P. Abgrall et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
Simple and rapid methods for the fabrication of polymeric and glass chips for using in analytical chemistry
Mohammad H. Sorouraddin et al.
ANALYTICA CHIMICA ACTA (2007)
Lamination-based rapid prototyping of microfluidic devices using flexible thermoplastic substrates
Debjani Paul et al.
ELECTROPHORESIS (2007)
Refreshable microfluidic channels constructed using an inkjet printer
Masashi Watanabe
SENSORS AND ACTUATORS B-CHEMICAL (2007)
Facile synthesis of poly(hydroxyethyl acrylate) by frontal free-radical polymerization
Su Chen et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2007)
Poly(vinyl alcohol) functionalized poly(dimethylsiloxane) solid surface for immunoassay
Ling Yu et al.
BIOCONJUGATE CHEMISTRY (2007)
Fabrication and characterization of microparts by mechanical micromachining: precision and cost estimation
Hyuk-Jin Kang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2007)
Evaluation of micromilled metal mold masters for the replication of microchip electrophoresis devices
Mateusz L. Hupert et al.
MICROFLUIDICS AND NANOFLUIDICS (2007)
Rapid prototyping in copper substrates for digital microfluidics
Mohamed Abdelgawad et al.
ADVANCED MATERIALS (2007)
Water-triggered frontal polymerization
Narahari S. Pujari et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2007)
Using pattern homogenization of binary grayscale masks to fabricate microfluidic structures with 3D topography
Javier Atencia et al.
LAB ON A CHIP (2007)
Rapid prototyping of microfluidic devices with a wax printer
Govind V. Kaigala et al.
LAB ON A CHIP (2007)
Patterned paper as a platform for inexpensive, low-volume, portable bioassays
Andres W. Martinez et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2007)
Applications of microplasmas and microreactor technology
U. Kogelschatz
CONTRIBUTIONS TO PLASMA PHYSICS (2007)
New functions for microfluidic components by using micro metal injection molding (mu-MIM)
N. Salk et al.
CHEMICAL ENGINEERING COMMUNICATIONS (2007)
Monodispersed microcapsules enclosing ionic liquid of 1-butyl-3-methylimidazolium hexafluorophosphate
W. W. Yang et al.
REACTIVE & FUNCTIONAL POLYMERS (2007)
An all SU-8 microfluidic chip with built-in 3D fine microstructures
Hironobu Sato et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2006)
Micromilling strategies for machining thin features
K. Popov et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2006)
LTCC meso-analytical system for chloride ion determination in drinking waters
N. Ibanez-Garcia et al.
SENSORS AND ACTUATORS B-CHEMICAL (2006)
Surface modification of poly(methyl methacrylate) for improved adsorption of wall coating polymers for microchip electrophoresis
Jayna J. Shah et al.
ELECTROPHORESIS (2006)
Benchtop polymer MEMS
Remi Delille et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2006)
Laser processing for bio-microfluidics applications (part I)
Chantal G. Khan Malek
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2006)
Laser processing for bio-microfluidics applications (part II)
Chantal G. Khan Malek
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2006)
Porous scaffold design for tissue engineering (vol 4, pg 518, 2005)
SJ Hollister
NATURE MATERIALS (2006)
Disposable integrated microfluidic biochip for blood typing by plastic microinjection moulding
Dong Sung Kim et al.
LAB ON A CHIP (2006)
A review of microvalves
Kwang W. Oh et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2006)
Plastic microchip liquid chromatography-matrix-assisted laser desorption/ionization mass spectrometry using monolithic columns
KW Ro et al.
JOURNAL OF CHROMATOGRAPHY A (2006)
Construction of refreshable microfluidic channels and electrophoresis along them
M Watanabe
SENSORS AND ACTUATORS B-CHEMICAL (2006)
A novel fabrication method of flexible and monolithic 3D microfluidic structures using lamination of SU-8 films
P Abgrall et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2006)
Large-scale hot embossing
M Worgull et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2005)
Enhanced machining of micron-scale features in microchip molding masters by CNC milling
JS Mecomber et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Surface-reactive acrylic copolymer for fabrication of microfluidic devices
JK Liu et al.
ANALYTICAL CHEMISTRY (2005)
Water-soluble photopolymers for rapid prototyping of cellular materials
R Liska et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
Machining of micro/miniature dies and moulds by electrical discharge machining - Recent development
E Uhlmann et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Rapidly prototyped three-dimensional nanofluidic channel networks in glass substrates
K Ke et al.
ANALYTICAL CHEMISTRY (2005)
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
JM Williams et al.
BIOMATERIALS (2005)
Microfluidics: Fluid physics at the nanoliter scale
TM Squires et al.
REVIEWS OF MODERN PHYSICS (2005)
Rapid fabrication of polymer microfluidic systems for the production of artificial lipid bilayers
ME Sandison et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)
Microfluidic immunosensor systems
A Bange et al.
BIOSENSORS & BIOELECTRONICS (2005)
Free-standing SU-8 microfluidic chips by adhesive bonding and release etching
S Tuomikoski et al.
SENSORS AND ACTUATORS A-PHYSICAL (2005)
Sorption of organic solvents by packaging materials:: polyethylene terephthalate and TOPAS®
M Limam et al.
POLYMER TESTING (2005)
Electrical porous silicon chemical sensor for detection of organic solvents
M Archer et al.
SENSORS AND ACTUATORS B-CHEMICAL (2005)
Micromixers - a review
NT Nguyen et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)
Microfluidic channel fabrication in dry film resist for production and prototyping of hybrid chips
P Vulto et al.
LAB ON A CHIP (2005)
Patterned cell culture inside microfluidic devices
SW Rhee et al.
LAB ON A CHIP (2005)
The autofluorescence of plastic materials and chips measured under laser irradiation
A Piruska et al.
LAB ON A CHIP (2005)
Rapid method for design and fabrication of passive micromixers in microfluidic devices using a direct-printing process
AL Liu et al.
LAB ON A CHIP (2005)
Surface-directed capillary system; theory, experiments and applications
S Bouaidat et al.
LAB ON A CHIP (2005)
Direct-write laser micromachining and universal surface modification of PMMA for device development
JY Cheng et al.
SENSORS AND ACTUATORS B-CHEMICAL (2004)
Integrated microfluidics based on multi-layered SU-8 for mass spectrometry analysis
J Carlier et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
Review on micro molding of thermoplastic polymers
M Heckele et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
Fabrication of single nanofluidic channels in poly(methylmethacrylate) films via focused-ion beam milling for use as molecular gates
DM Cannon et al.
APPLIED PHYSICS LETTERS (2004)
Rapid prototyping of thermoset polyester microfluidic devices
GS Fiorini et al.
ANALYTICAL CHEMISTRY (2004)
Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique
TBF Woodfield et al.
BIOMATERIALS (2004)
Two-photon three-dimensional microfabrication of poly(dimethylsiloxane) elastomers
CA Coenjarts et al.
CHEMISTRY OF MATERIALS (2004)
Rapid prototyping in tissue engineering: challenges and potential
WY Yeong et al.
TRENDS IN BIOTECHNOLOGY (2004)
Solvent resistant photocurable liquid teflon for microfluidic device fabrication (vol 126, pg 2322, 2004)
JP Rolland et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2004)
Biosensors - 42 years and counting
GG Guilbault et al.
ANALYTICAL LETTERS (2004)
Fabrication of tissue engineered tympanic membrane patches using computer-aided design and injection molding
ME Hott et al.
LARYNGOSCOPE (2004)
Frontal photopolymerization for microfluidic applications
JT Cabral et al.
LANGMUIR (2004)
Fabrication of a versatile microanalytical system without need for clean room conditions
L Szekely et al.
ANALYTICA CHIMICA ACTA (2004)
PMMA to SU-8 bonding for polymer based lab-on-a-chip systems with integrated optics
B Bilenberg et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
Thiol-enes: Chemistry of the past with promise for the future
CE Hoyle et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2004)
A review of micropumps
DJ Laser et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
Electrophoresis microchip fabricated by a direct-printing process with end-channel amperometric detection
WKT Coltro et al.
ELECTROPHORESIS (2004)
Precision extruding deposition and characterization of cellular poly-epsilon-caprolactone tissue scaffolds
F Wang et al.
RAPID PROTOTYPING JOURNAL (2004)
State of understanding of Nafion
KA Mauritz et al.
CHEMICAL REVIEWS (2004)
Rapid prototyping of polymer microsystems via excimer laser ablation of polymeric moulds
MF Jensen et al.
LAB ON A CHIP (2004)
A microfluidic electrocapture device in sample preparation for protein analysis by MALDI mass spectrometry
J Astorga-Wells et al.
ANALYTICAL CHEMISTRY (2003)
A dry process for production of microfluidic devices based on the lamination of laser-printed polyester films
CL do Lago et al.
ANALYTICAL CHEMISTRY (2003)
Microfluidics meets MEMS
E Verpoorte et al.
PROCEEDINGS OF THE IEEE (2003)
Biocompatibility and biofouling of MEMS drug delivery devices
G Voskerician et al.
BIOMATERIALS (2003)
A photocurable poly(dimethylsiloxane) chemistry designed for soft lithographic molding and printing in the nanometer regime
KM Choi et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2003)
Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly
D Therriault et al.
NATURE MATERIALS (2003)
Microfluidic multicompartment device for neuroscience research
AM Taylor et al.
LANGMUIR (2003)
Femtosecond laser-induced two-photon polymerization of inorganic-organic hybrid materials for applications in photonics
J Serbin et al.
OPTICS LETTERS (2003)
Microsyringe-based deposition of two-dimensional and three-dimensional polymer scaffolds with a well-defined geometry for application to tissue engineering
G Vozzi et al.
TISSUE ENGINEERING (2002)
Nanometer thickness laser ablation for spatial control of cell attachment
H Thissen et al.
SMART MATERIALS & STRUCTURES (2002)
A new fabrication process for ultra-thick microfluidic microstructures utilizing SU-8 photoresist
CH Lin et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2002)
Low-cost thermoforming of micro fluidic analysis chips
R Truckenmüller et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2002)
Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition
Z Xiong et al.
SCRIPTA MATERIALIA (2002)
Fabrication of 3D chitosan-hydroxyapatite scaffolds using a robotic dispensing system
TH Ang et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2002)
Prototyping of microfluidic devices in poly(dimethylsiloxane) using solid-object printing
JC McDonald et al.
ANALYTICAL CHEMISTRY (2002)
Plastic advances microfluidic devices.
T Boone et al.
ANALYTICAL CHEMISTRY (2002)
Rapid microfluidic mixing
TJ Johnson et al.
ANALYTICAL CHEMISTRY (2002)
High sensitivity PCR assay in plastic micro reactors
JN Yang et al.
LAB ON A CHIP (2002)
CO2-laser micromachining and back-end processing for rapid production of PMMA-based microfluidic systems
H Klank et al.
LAB ON A CHIP (2002)
Fabrication of porous poly(L-lactic acid) scaffolds for bone tissue engineering via precise extrusion
Z Xiong et al.
SCRIPTA MATERIALIA (2001)
Photomodification of polymer microchannels induced by static and dynamic excimer ablation: Effect on the electroosmotic flow
F Bianchi et al.
ANALYTICAL CHEMISTRY (2001)
Laser modification of preformed polymer microchannels: Application to reduce band broadening around turns subject to electrokinetic flow
TJ Johnson et al.
ANALYTICAL CHEMISTRY (2001)
Advanced photoresist technologies for microsystems
J O'Brien et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2001)
Microfabricated plastic chips by hot embossing methods and their applications for DNA separation and detection
GB Lee et al.
SENSORS AND ACTUATORS B-CHEMICAL (2001)
Short fiber reinforced composites for fused deposition modeling
WH Zhong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Biocompatibility of silicon-based arrays of electrodes coupled to organotypic hippocampal brain slice cultures
BW Kristensen et al.
BRAIN RESEARCH (2001)
Thermal polymerization of uniform macrocyclic ethylene terephthalate dimer
R Nagahata et al.
POLYMER (2001)
Fluoroelastomers:: synthesis, properties and applications
B Améduri et al.
PROGRESS IN POLYMER SCIENCE (2001)
Processing of advanced electroceramic components by fused deposition technique
M Allahverdi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)
Rapid fabrication of microfluidic devices in poly(dimethylsiloxane) by photocopying
AM Tan et al.
LAB ON A CHIP (2001)
A novel micro-machining method for the fabrication of thick-film SU-8 embedded micro-channels
FEH Tay et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2001)
Microfluidic tectonics: A comprehensive construction platform for microfluidic systems
DJ Beebe et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2000)