Simultaneous determination of hexabromocyclododecane, tetrabromobisphenol A, and related compounds in sewage sludge and sediment samples from Ebro River basin (Spain)

This paper describes the development of a methodology for the simultaneous determination and quantification of hexabromocyclododecane (HBCD), tetrabromobisphenol A (TBBPA), and related compounds (bisphenol A, monobromobisphenol A, dibromobisphenol A, and tribromobisphenol A) in sludge and sediment samples. The selected method is based on an extraction with dichloromethane: methanol followed by purification via SPE C-18 cartridges. Instrumental determination was carried out by liquid chromatography-quadrupole linear ion trap mass spectrometry (LC-QqLIT-MS), with quantification based on isotopic dilution method. Analyte recoveries were in the range of 39-120% and 88-126% for spiked sewage and sediment, respectively. Repeatability of replicate extractions was better than 13% relative standard deviation. Linearity was checked in the range of 0.05 and 25 injected nanograms. Limits of detection (LODs) and limits of quantification (LOQs) were in the range of 0.6 and 2.7 ng/g and 1.4 and 66 ng/g for sediment and sludge samples, respectively. The developed method was applied to sewage sludge and sediment samples collected along the Ebro River and Cinca River, one of its tributaries (northeast of Spain). TBBPA levels in sewage sludge ranged from not quantified to 1,329 ng/g dw, whereas levels in sediment samples were lower, between not detected and 15 ng/g dw. As regards HBCD, concentrations were between not detected and 375 ng/g for sludge samples and 0.8 and 1850 ng/g for sediments.