Development of molecularly imprinted poly(methacrylic acid)/silica for clean-up and selective extraction of cholesterol in milk prior to analysis by HPLC-UV

In the present paper the assessment of a novel molecularly imprinted polymer, poly(methacrylic acid)/silica, for clean-up and selective extraction of cholesterol in milk samples is described. The relative selectivity coefficient (k) values for cholesterol/5-alpha-cholestane and cholesterol/7-dehydrocholesterol systems were found to be 5.08 and 6.08, respectively, thus attesting the selectivity of the MIP for cholesterol under competitive adsorption with structurally analogous steroid compounds. The milk analysis was initially based on saponification followed by liquid-liquid extraction with n-hexane. Then, the protocol of molecularly imprinted solid phase extraction (MISPE) was carried out by loading the milk hexanic extract through 200 mg of MIP or NIP (non-imprinted polymer) packed into SPE cartridges at a flow rate of 0.6 mL min(-1). The washing step was performed by using n-hexane followed by further elution with ethanol and HPLC-UV analysis at 208 nm. From the breakthrough curve the maximum adsorption capacity of the MIP towards cholesterol was found to be 29.51 mg g(-1). The precision of the MISPE protocol was assessed as intra-and inter-days yielding RSD (relative standard deviations) lower than 4.10%. Cleaner HPLC chromatograms were obtained for milk samples submitted to the MISPE protocol in comparison to the solid phase extraction using the NIP or modified octadecyl silica (C-18). Recoveries varying from 96.6 up to 102.2% for milk samples spiked with cholesterol were achieved, thus ensuring the accuracy of the proposed method.