Thermal oxidation of 6 nm aerosolized silicon nanoparticles: Size and surface chemistry changes

The earliest stages of thermal oxidation of 6 nm diameter silicon nanoparticles by molecular oxygen are examined using a tandem differential mobility analysis (TDMA) apparatus, Fourier-transform infrared (FTIR) spectroscopy, time-of-flight secondary ion mass spectroscopy (ToF-SIMS), and X-ray photoelectron spectroscopy (XPS). Particles are synthesized in and then extracted from a nonthermal RF plasma operating at similar to 20 Torr into the atmospheric pressure TDMA apparatus. The TDMA apparatus was used to measure oxidation-induced size changes over a broad range of temperature settings and N-2-O-2 carrier gas composition. Surface chemistry changes are evaluated in situ with an FTIR spectrometer and a hybrid flow-through cell, and ex situ with ToF-SIMS and XPS. Particle size measurements show that, at temperatures less than similar to 500 degrees C, particles shrink regardless of the carrier gas oxygen concentration, while FTIR and ToF-SIMS spectra demonstrate a loss of hydrogen from the particles and minimal oxide formation. At higher temperatures, FTIR and XPS spectra indicate that an oxide forms which tends toward, but does not fully reach, stoichiometric SiO2 with increasing temperature. Between 500 and 800 degrees C, size measurements show a small increase in particle diameter with increasing carrier gas oxygen content and temperature. Above 800 degrees C, particle growth rapidly reaches a plateau while FTIR and XPS spectra change little. ToF-SIMS signals associated with O-Si species also show an increase in intensity at 800 degrees C.