Factors affecting the combustion toxicity of polymeric materials

Fire gas toxicity is an essential component of any fire hazard analysis. However, fire toxicity, like flammability, is both scenario and material dependent. A number of different methods exist to assess the fire toxicity, but many of them fail to relate this to a particular fire scenario. Sample thickness alone, in a closed box test such as the NBS Smoke Chamber, is shown to change the fire scenario from well-ventilated to under-ventilated. Data from two flow-through tests, the static tube furnace (NF X 70-100) and the steady state tube furnace (the Purser furnace, BS 7990 and ISO TS 19700) show that there are different patterns of behaviour for different polymers (LDPE, polystyrene, rigid PVC and Nylon 6.6). The predicted toxicities show variation of up to two orders of magnitude with change in fire scenario. They also show change of at least one order of magnitude for different materials in the same fire scenario. Finally, they show that in many cases CO, which is often assumed to be the most, or ven the only toxicologically significant fire gas, is of less importance than either HCl, or HCN, when present, and in some cases less important than organo-irritants. Nylon 6.6 shows the highest predicted toxicity, the greatest scenario dependence, and the least sensitivity to different aparatuses, while polystyrene shows the highest sensitivity to the different apparatuses, but the lowest to different fire scenarios. PVC shows high toxicity, mostly due to HCl in the fire effluent, under all fire conditions, and LDPE shows a more progressive increase in toxicity from well-ventilated flaming to both smouldering and under-ventilated flaming. (C) 2007 Elsevier Ltd. All rights reserved.