Journal
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT
Volume 583, Issue 1, Pages 173-176Publisher
ELSEVIER
DOI: 10.1016/j.nima.2007.08.211
Keywords
silicon carbide; detectors; radiation damage; annealing effects
Ask authors/readers for more resources
In this work, we analyzed the annealing effects on silicon carbide (SiC) p(+)n diodes after very high 1 MeV neutron fluence. The diode structure is based on ion-implanted p(+) emitter in n-type epilayer with thickness equal to 5 mu m and donor doping N-D = 3 x 10(15) CM-3. These devices were irradiated with I MeV neutrons at four different fluence values, logarithmically distributed in the range 10(14)-10(16) cm(-2). After irradiation, the epilayer material became more resistive, as indicated by the reduction of the forward and reverse current density at a given voltage. In particular, after irradiation at the highest fluence value, the average leakage current density at 100 V reverse bias decreased from 3 nA/cm(2) to values of the order of 100 pA/cm(2). After a neutron fluence of 1 x 10(14)cm(-2), the epilayer doping concentration decreased to 1.5 x 10(15)cm(-3). The samples underwent a sequence of thermal cycles first at 80 degrees C and then at 200 degrees C to verify if a damage recovery occurs in irradiated SiC samples, as in the case of silicon ones. After annealing at 80 degrees C, the reverse current further decreased, while the depletion voltage remained almost constant. After thermal cycles at 200 degrees C, the current decreased further and the depletion voltage slightly increased, showing a very low recovery of the damage. (c) 2007 Elsevier B.V. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available