Effects of mean stress and fibre volume content on the fatigue-induced damage mechanisms in CFRP

The effect of the load type (tension and compression) in quasi-static and of the applied mean stress in fatigue tests on the mechanical behaviour and on the damage mechanisms in unidirectional (up) carbon/epoxy laminates has been studied in combination with the influence of fibre volume content. Results show that the fibre volume content increases the mechanical properties in tension-tension fatigue tests for all tested angles 0 degrees, 45 degrees and 90 degrees. The tensile damage mechanisms of off-axis specimens depend on the fibre volume content and change from matrix cracking and matrix-fibre debonding to fibre-pull out with an increasing amount of fibres as investigated in detail in a previous work. In tension-compression tests, higher fibre volume contents are only beneficial in fatigue tests at angles of 0 degrees and 45 degrees. Fatigue strengths of UD 90 degrees specimens in tension-compression tests are not significantly improved by the fibre volume content which can be ascribed to breakage of entire fibre bundles and crushed fibres on the fracture surfaces. (C) 2015 Elsevier Ltd. All rights reserved.