Related references
Note: Only part of the references are listed.Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology
Tao Xu et al.
BIOMATERIALS (2013)
Evaluation of hydrogels for bio-printing applications
Sean V. Murphy et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Bin Duan et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Gelatin-Methacrylamide Hydrogels as Potential Biomaterials for Fabrication of Tissue-Engineered Cartilage Constructs
Wouter Schuurman et al.
MACROMOLECULAR BIOSCIENCE (2013)
Cell(MC3T3-E1)-Printed Poly(ε-caprolactone)/Alginate Hybrid Scaffolds for Tissue Regeneration
HyeongJin Lee et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2013)
High-Fidelity Tissue Engineering of Patient-Specific Auricles for Reconstruction of Pediatric Microtia and Other Auricular Deformities
Alyssa J. Reiffel et al.
PLOS ONE (2013)
Mechanically strong hydrogels with reversible behaviour under cyclic compression with MPa loading
Konstantina Harrass et al.
SOFT MATTER (2013)
Three-dimensional printing of stem cell-laden hydrogels submerged in a hydrophobic high-density fluid
Daniela F. Duarte Campos et al.
BIOFABRICATION (2013)
Laser-assisted printing of alginate long tubes and annular constructs
Jingyuan Yan et al.
BIOFABRICATION (2013)
Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications
Tao Xu et al.
BIOFABRICATION (2013)
Characterization of printable cellular micro-fluidic channels for tissue engineering
Yahui Zhang et al.
BIOFABRICATION (2013)
Dermal fibroblast infiltration of poly(ε-caprolactone) scaffolds fabricated by melt electrospinning in a direct writing mode
Brooke L. Farrugia et al.
BIOFABRICATION (2013)
Biofabrication of multi-material anatomically shaped tissue constructs
Jetze Visser et al.
BIOFABRICATION (2013)
Quantitative optimization of solid freeform deposition of aqueous hydrogels
K. H. Kang et al.
BIOFABRICATION (2013)
Biodegradable Thermogels
Min Hee Park et al.
ACCOUNTS OF CHEMICAL RESEARCH (2012)
Carbon Nanotube Reinforced Hybrid Microgels as Scaffold Materials for Cell Encapsulation
Su Ryon Shin et al.
ACS NANO (2012)
High mesenchyrnal stem cell seeding densities in hyaluronic acid hydrogels produce engineered cartilage with native tissue properties
Isaac E. Erickson et al.
ACTA BIOMATERIALIA (2012)
Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds
Andre Butscher et al.
ACTA BIOMATERIALIA (2012)
The mechanical properties and cytotoxicity of cell-laden double-network hydrogels based on photocrosslinkable gelatin and gellan gum biomacromolecules
Hyeongho Shin et al.
BIOMATERIALS (2012)
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Thomas Billiet et al.
BIOMATERIALS (2012)
Enzyme-catalyzed crosslinkable hydrogels: Emerging strategies for tissue engineering
Liliana S. Moreira Teixeira et al.
BIOMATERIALS (2012)
Improving piezoelectric cell printing accuracy and reliability through neutral buoyancy of suspensions
Daljeet Chahal et al.
BIOTECHNOLOGY AND BIOENGINEERING (2012)
Skin tissue generation by laser cell printing
Lothar Koch et al.
BIOTECHNOLOGY AND BIOENGINEERING (2012)
Hydrogels for Protein Delivery
Tina Vermonden et al.
CHEMICAL REVIEWS (2012)
Hydrogels for protein delivery in tissue engineering
Roberta Censi et al.
JOURNAL OF CONTROLLED RELEASE (2012)
Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system
Jin-Hyung Shim et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)
TISSUE ENGINEERING Perfusable vascular networks
Gabor Forgacs
NATURE MATERIALS (2012)
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Jordan S. Miller et al.
NATURE MATERIALS (2012)
Click Chemistry for Drug Delivery Nanosystems
Enrique Lallana et al.
PHARMACEUTICAL RESEARCH (2012)
Super tough double network hydrogels and their application as biomaterials
Md. Anamul Haque et al.
POLYMER (2012)
Bioinspired nanofibers support chondrogenesis for articular cartilage repair
Jeannine M. Coburn et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)
Additive manufacturing of tissues and organs
Ferry P. W. Melchels et al.
PROGRESS IN POLYMER SCIENCE (2012)
Printing and Prototyping of Tissues and Scaffolds
Brian Derby
SCIENCE (2012)
Designing Cell-Compatible Hydrogels for Biomedical Applications
Dror Seliktar
SCIENCE (2012)
Shear-thinning hydrogels for biomedical applications
Murat Guvendiren et al.
SOFT MATTER (2012)
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Xiaofeng Cui et al.
TISSUE ENGINEERING PART A (2012)
Improving Viability of Stem Cells During Syringe Needle Flow Through the Design of Hydrogel Cell Carriers
Brian A. Aguado et al.
TISSUE ENGINEERING PART A (2012)
Layer-by-Layer Tissue Microfabrication Supports Cell Proliferation In Vitro and In Vivo
Sylvain Catros et al.
TISSUE ENGINEERING PART C-METHODS (2012)
Biofabrication of Osteochondral Tissue Equivalents by Printing Topologically Defined, Cell-Laden Hydrogel Scaffolds
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART C-METHODS (2012)
Toward engineering functional organ modules by additive manufacturing
Francoise Marga et al.
BIOFABRICATION (2012)
Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds
L. A. Hockaday et al.
BIOFABRICATION (2012)
Advances in Bioactive Hydrogels to Probe and Direct Cell Fate
Cole A. DeForest et al.
ANNUAL REVIEW OF CHEMICAL AND BIOMOLECULAR ENGINEERING, VOL 3 (2012)
3D Microperiodic Hydrogel Scaffolds for Robust Neuronal Cultures
Jennifer N. Hanson Shepherd et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
A Printable Photopolymerizable Thermosensitive p(HPMAm-lactate)-PEG Hydrogel for Tissue Engineering
Roberta Censi et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Direct Writing By Way of Melt Electrospinning
Toby D. Brown et al.
ADVANCED MATERIALS (2011)
Sodium Alginate Hydrogel-Based Bioprinting Using a Novel Multinozzle Bioprinting System
Seung-Joon Song et al.
ARTIFICIAL ORGANS (2011)
Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting
Laura Pescosolido et al.
BIOMACROMOLECULES (2011)
Synthetic multicellular cell-to-cell communication in inkjet printed bacterial cell systems
Woon Sun Choi et al.
BIOMATERIALS (2011)
An alginate-based hybrid system for growth factor delivery in the functional repair of large bone defects
Yash M. Kolambkar et al.
BIOMATERIALS (2011)
Solvent bonding of poly(methyl methacrylate) microfluidic chip using phase-changing agar hydrogel as a sacrificial layer
Zhibin Gan et al.
ELECTROPHORESIS (2011)
Direct-write bioprinting three-dimensional biohybrid systems for future regenerative therapies
Carlos C. Chang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2011)
Patterned Hydrogel Substrates for Cell Culture with Electrohydrodynamic Jet Printing
Michael J. Poellmann et al.
MACROMOLECULAR BIOSCIENCE (2011)
Chitosan-A versatile semi-synthetic polymer in biomedical applications
M. Dash et al.
PROGRESS IN POLYMER SCIENCE (2011)
Biomimetics of the extracellular matrix: an integrated three-dimensional fiber-hydrogel composite for cartilage tissue engineering
Jeannine Coburn et al.
SMART STRUCTURES AND SYSTEMS (2011)
Hydrogels for the Repair of Articular Cartilage Defects
Kara L. Spiller et al.
TISSUE ENGINEERING PART B-REVIEWS (2011)
Increased Mixing Improves Hydrogel Homogeneity and Quality of Three-Dimensional Printed Constructs
Daniel L. Cohen et al.
TISSUE ENGINEERING PART C-METHODS (2011)
Laser Printing of Three-Dimensional Multicellular Arrays for Studies of Cell-Cell and Cell-Environment Interactions
Martin Gruene et al.
TISSUE ENGINEERING PART C-METHODS (2011)
Cell patterning technologies for organotypic tissue fabrication
Bertrand Guillotin et al.
TRENDS IN BIOTECHNOLOGY (2011)
Bioprinting cell-laden matrigel for radioprotection study of liver by pro-drug conversion in a dual-tissue microfluidic chip
J. E. Snyder et al.
BIOFABRICATION (2011)
Three-dimensional inkjet biofabrication based on designed images
Kenichi Arai et al.
BIOFABRICATION (2011)
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
W. Schuurman et al.
BIOFABRICATION (2011)
Development of a hybrid scaffold with synthetic biomaterials and hydrogel using solid freeform fabrication technology
Jin-Hyung Shim et al.
BIOFABRICATION (2011)
Laser-assisted bioprinting for creating on-demand patterns of human osteoprogenitor cells and nano-hydroxyapatite
Sylvain Catros et al.
BIOFABRICATION (2011)
Synthesis and recovery characteristics of branched and grafted PNIPAAm-PEG hydrogels for the development of an injectable load-bearing nucleus pulposus replacement
Jonathan D. Thomas et al.
ACTA BIOMATERIALIA (2010)
Protein Engineering in the Development of Functional Hydrogels
Scott Banta et al.
ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, VOL 12 (2010)
Influence of Amide versus Ester Linkages on the Properties of Eight-Armed PEG-PLA Star Block Copolymer Hydrogels
Sytze J. Buwalda et al.
BIOMACROMOLECULES (2010)
Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates
Aleksander Skardal et al.
BIOMATERIALS (2010)
Injectable PLGA based colloidal gels for zero-order dexamethasone release in cranial defects
Qun Wang et al.
BIOMATERIALS (2010)
An cell-assembly derived physiological 3D model of the metabolic syndrome, based on adipose-derived stromal cells and a gelatin/alginate/fibrinogen matrix
Mingen Xu et al.
BIOMATERIALS (2010)
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Bertrand Guillotin et al.
BIOMATERIALS (2010)
Cell Damage Evaluation of Thermal Inkjet Printed Chinese Hamster Ovary Cells
Xiaofeng Cui et al.
BIOTECHNOLOGY AND BIOENGINEERING (2010)
Cell encapsulation using biopolymer gels for regenerative medicine
Nicola C. Hunt et al.
BIOTECHNOLOGY LETTERS (2010)
Towards organ printing: engineering an intra-organ branched vascular tree
Richard P. Visconti et al.
EXPERT OPINION ON BIOLOGICAL THERAPY (2010)
Two-photon lithography in the future of cell-based therapeutics and regenerative medicine: a review of techniques for hydrogel patterning and controlled release
Andrea M. Kasko et al.
FUTURE MEDICINAL CHEMISTRY (2010)
In-situ forming hydrogels by simultaneous thermal gelling and Michael addition reaction between methacrylate bearing thermosensitive triblock copolymers and thiolated hyaluronan
R. Censi et al.
JOURNAL OF CONTROLLED RELEASE (2010)
Some hydrogels having novel molecular structures
Jeremiah A. Johnson et al.
PROGRESS IN POLYMER SCIENCE (2010)
Why are double network hydrogels so tough?
Jian Ping Gong
SOFT MATTER (2010)
Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting
Aleksander Skardal et al.
TISSUE ENGINEERING PART A (2010)
Layer by Layer Three-Dimensional Tissue Epitaxy by Cell-Laden Hydrogel Droplets
SangJun Moon et al.
TISSUE ENGINEERING PART C-METHODS (2010)
An Optical Method for Evaluation of Geometric Fidelity for Anatomically Shaped Tissue-Engineered Constructs
Jeffrey J. Ballyns et al.
TISSUE ENGINEERING PART C-METHODS (2010)
Additive manufacturing for in situ repair of osteochondral defects
Daniel L. Cohen et al.
BIOFABRICATION (2010)
Bio rapid prototyping by extruding/aspirating/refilling thermoreversible hydrogel
K. Iwami et al.
BIOFABRICATION (2010)
Bioprinting is coming of age: report from the International Conference on Bioprinting and Biofabrication in Bordeaux (3B'09)
Fabien Guillemot et al.
BIOFABRICATION (2010)
Biomatrices and biomaterials for future developments of bioprinting and biofabrication
M. Nakamura et al.
BIOFABRICATION (2010)
Photopatterned collagen-hyaluronic acid interpenetrating polymer network hydrogels
Shalu Suri et al.
ACTA BIOMATERIALIA (2009)
Protein-Release Behavior of Self-Assembled PEG-β-Cyclodextrin/PEG-Cholesterol Hydrogels
Frank van de Manakker et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Evaluation of Photocrosslinked Lutrol Hydrogel for Tissue Printing Applications
Natalja E. Fedorovich et al.
BIOMACROMOLECULES (2009)
Tissue assembly and organization: Developmental mechanisms in microfabricated tissues
Nicolas C. Rivron et al.
BIOMATERIALS (2009)
Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication
Wonhye Lee et al.
BIOMATERIALS (2009)
Scaffold-free vascular tissue engineering using bioprinting
Cyrille Norotte et al.
BIOMATERIALS (2009)
Rheological Behavior of Alginate Solutions for Biomanufacturing
Rodrigo Alvarenga Rezende et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Direct Fabrication of a Hybrid Cell/Hydrogel Construct by a Double-nozzle Assembling Technology
Shengjie Li et al.
JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS (2009)
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Saif Khalil et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2009)
Reverse thermogelling biodegradable polymer aqueous solutions
Min Kyung Joo et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Design criteria for a printed tissue engineering construct: A mathematical homogenization approach
R. J. Shipley et al.
JOURNAL OF THEORETICAL BIOLOGY (2009)
Strategies for Zonal Cartilage Repair using Hydrogels
Travis J. Klein et al.
MACROMOLECULAR BIOSCIENCE (2009)
Construction of 3D biological matrices using rapid prototyping technology
P. S. Maher et al.
RAPID PROTOTYPING JOURNAL (2009)
A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds
A. Tirella et al.
BIOFABRICATION (2009)
Biodegradable colloidal gels as moldable tissue engineering scaffolds
Qun Wang et al.
ADVANCED MATERIALS (2008)
Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
Rachel E. Saunders et al.
BIOMATERIALS (2008)
Thermoresponsive hydrogels in biomedical applications
Leda Klouda et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2008)
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Brian Derby
JOURNAL OF MATERIALS CHEMISTRY (2008)
Inhibition of apoptosis prevents shear-induced detachment of endothelial cells
Danielle K. Macario et al.
JOURNAL OF SURGICAL RESEARCH (2008)
Polymer Networks Assembled by Host-Guest Inclusion between Adamantyl and β-Cyclodextrin Substituents on Poly(acrylic acid) in Aqueous Solution
Li Li et al.
MACROMOLECULES (2008)
Organ printing: promises and challenges
Vladimir Mironov et al.
REGENERATIVE MEDICINE (2008)
Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART A (2008)
Tissue engineering by self-assembly of cells printed into topologically defined structures
Karoly Jakab et al.
TISSUE ENGINEERING PART A (2008)
Cell encapsulation in biodegradable hydrogels for tissue engineering applications
Garret D. Nicodemus et al.
TISSUE ENGINEERING PART B-REVIEWS (2008)
Biomimetic strain hardening in interpenetrating polymer network hydrogels
David Myung et al.
POLYMER (2007)
Hydrogels as extracellular matrices for skeletal tissue engineering: state-of-the-art and novel application in organ printing
Natalja E. Fedorovich et al.
TISSUE ENGINEERING (2007)
Smart polymeric gels: Redefining the limits of biomedical devices
Somali Chaterji et al.
PROGRESS IN POLYMER SCIENCE (2007)
Rapid prototyping three-dimensional cell/gelatin/fibrinogen constructs for medical regeneration
Wei Xu et al.
JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS (2007)
A cell-laden microfluidic hydrogel
Yibo Ling et al.
LAB ON A CHIP (2007)
Fabrication of microfluidic hydrogels using molded gelatin as a sacrificial element
Andrew P. Golden et al.
LAB ON A CHIP (2007)
Biodegradation of high-toughness double network hydrogels as potential materials for artificial cartilage
Chinatsu Azuma et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Characterizing environmental factors that impact the viability of tissue-engineered constructs fabricated by a direct-write bioassembly tool
Cynthia M. Smith et al.
TISSUE ENGINEERING (2007)
Recent advances in the preparation of cyclodextrin-based polyrotaxanes and their applications to soft materials
Jun Araki et al.
SOFT MATTER (2007)
Three-dimensional gelatin and gelatin/hyaluronan hydrogel structures for traumatic brain injury
Ting Zhang et al.
JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS (2007)
Electrospun poly(ε-caprolactone) microfiber and multilayer nanofiber/microfiber scaffolds:: Characterization of scaffolds and measurement of cellular infiltration
Quynh P. Pham et al.
BIOMACROMOLECULES (2006)
Peptide-based stimuli-responsive biomaterials
Robert J. Mart et al.
SOFT MATTER (2006)
Direct freeform fabrication of seeded hydrogels in arbitrary geometries
Daniel L. Cohen et al.
TISSUE ENGINEERING (2006)
Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system
XH Wang et al.
TISSUE ENGINEERING (2006)
Switchable hydrogels obtained by supramolecular cross-linking of adamantyl-containing LCST copolymers with cyclodextrin dimers
Oliver Kretschmann et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2006)
Stereolithography of three-dimensional bioactive poly(ethylene glycol) constructs with encapsulated cells
Karina Arcaute et al.
ANNALS OF BIOMEDICAL ENGINEERING (2006)
Biocompatible inkjet printing technique for designed seeding of individual living cells
M Nakamura et al.
TISSUE ENGINEERING (2005)
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique
YN Yan et al.
BIOMATERIALS (2005)
Poly( ethylene glycol) hydrogel system supports preadipocyte viability, adhesion, and proliferation
PN Patel et al.
TISSUE ENGINEERING (2005)
A modular and supramolecular approach to bioactive scaffolds for tissue engineering
PYW Dankers et al.
NATURE MATERIALS (2005)
Direct construction of a three-dimensional structure with cells and hydrogel
YN Yan et al.
JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS (2005)
Self-gelling hydrogels based on oppositely charged dextran microspheres
SR Van Tomme et al.
BIOMATERIALS (2005)
Attachment, morphology and adherence of human endothelial cells to vascular prosthesis materials under the action of shear stress
P Feugier et al.
BIOMATERIALS (2005)
Variable cytocompatibility of six cell lines with photoinitiators used for polymerizing hydrogels and cell encapsulation
CG Williams et al.
BIOMATERIALS (2005)
Multi-nozzle deposition for construction of 3D biopolymer tissue scaffolds
S Khalil et al.
RAPID PROTOTYPING JOURNAL (2005)
Replica multichannel polymer chips with a network of sacrificial channels sealed by adhesive printing method
F Dang et al.
LAB ON A CHIP (2005)
Biofunctional rapid prototyping for tissue-engineering applications:: 3D bioplotting versus 3D printing
A Pfister et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2004)
Stimuli-sensitive hydrogels: ideal carriers for chronobiology and chronotherapy
NA Peppas et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2004)
In vitro cytotoxicity of redox radical initiators for cross-linking of oligo(poly(ethylene glycol) fumarate) macromers
JS Temenoff et al.
BIOMACROMOLECULES (2003)
RGD modified polymers: biomaterials for stimulated cell adhesion and beyond
U Hersel et al.
BIOMATERIALS (2003)
Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering
R Landers et al.
BIOMATERIALS (2002)
Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques
R Landers et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Novel crosslinking methods to design hydrogels
WE Hennink et al.
ADVANCED DRUG DELIVERY REVIEWS (2002)
Hydrogel properties influence ECM production by chondrocytes photoencapsulated in poly(ethylene glycol) hydrogels
SJ Bryant et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Fabrication of microchannels using polycarbonates as sacrificial materials
HA Reed et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2001)
Inkjet printing for materials and devices
P Calvert
CHEMISTRY OF MATERIALS (2001)
Controlled growth factor release from synthetic extracellular matrices
KY Lee et al.
NATURE (2000)