Related references
Note: Only part of the references are listed.Finely Tailored Performance of Inverted Organic Photovoltaics through Layer-by-Layer Interfacial Engineering
Qun Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2011)
Fused Silver Nanowires with Metal Oxide Nanoparticles and Organic Polymers for Highly Transparent Conductors
Rui Zhu et al.
ACS NANO (2011)
Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells
Zhicai He et al.
ADVANCED MATERIALS (2011)
Conjugated Zwitterionic Polyelectrolytes and Their Neutral Precursor as Electron Injection Layer for High-Performance Polymer Light-Emitting Diodes
Chunhui Duan et al.
ADVANCED MATERIALS (2011)
Largely Enhanced Efficiency with a PFN/Al Bilayer Cathode in High Efficiency Bulk Heterojunction Photovoltaic Cells with a Low Bandgap Polycarbazole Donor
Zhicai He et al.
ADVANCED MATERIALS (2011)
A Robust Inter-Connecting Layer for Achieving High Performance Tandem Polymer Solar Cells
Jun Yang et al.
ADVANCED MATERIALS (2011)
Polarizing Organic Photovoltaics
Rui Zhu et al.
ADVANCED MATERIALS (2011)
Combination of Titanium Oxide and a Conjugated Polyelectrolyte for High-Performance Inverted-Type Organic Optoelectronic Devices
Hyosung Choi et al.
ADVANCED MATERIALS (2011)
Counterion Pinning in Conjugated Polyelectrolytes for Applications in Organic Electronics
Ullrich Scherf
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
Development of Fluorinated Benzothiadiazole as a Structural Unit for a Polymer Solar Cell of 7% Efficiency
Huaxing Zhou et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
Enhancement of Donor-Acceptor Polymer Bulk Heterojunction Solar Cell Power Conversion Efficiencies by Addition of Au Nanoparticles
Dong Hwan Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
Recent Advances in Conjugated Polyelectrolytes for Emerging Optoelectronic Applications
Aidee Duarte et al.
CHEMISTRY OF MATERIALS (2011)
Influence of water-soluble polythiophene as an interfacial layer on the P3HT/PCBM bulk heterojunction organic photovoltaics
Kai Yao et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
High-Performance Solid-State Organic Dye Sensitized Solar Cells with P3HT as Hole Transporter
Wei Zhang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2011)
Dithienogermole As a Fused Electron Donor in Bulk Heterojunction Solar Cells
Chad M. Amb et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Conjugated Zwitterionic Polyelectrolyte as the Charge Injection Layer for High-Performance Polymer Light-Emitting Diodes
Junfeng Fang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Bulk Heterojunction Solar Cells Using Thieno[3,4-c]pyrrole-4,6-dione and Dithieno[3,2-b:2′,3′-d]silole Copolymer with a Power Conversion Efficiency of 7.3%
Ta-Ya Chu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Improved High-Efficiency Organic Solar Cells via Incorporation of a Conjugated Polyelectrolyte Interlayer
Jung Hwa Seo et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
A New Class of Semiconducting Polymers for Bulk Heterojunction Solar Cells with Exceptionally High Performance
Yongye Liang et al.
ACCOUNTS OF CHEMICAL RESEARCH (2010)
Water-Soluble Polyfluorenes as an Interfacial Layer Leading to Cathode-Independent High Performance of Organic Solar Cells
Seung-Hwan Oh et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Stable Inverted Polymer/Fullerene Solar Cells Using a Cationic Polythiophene Modified PEDOT:PSS Cathodic Interface
David A. Rider et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Interface Engineering for Organic Electronics
Hong Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Polymer-Fullerene Bulk-Heterojunction Solar Cells
Christoph J. Brabec et al.
ADVANCED MATERIALS (2010)
For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%
Yongye Liang et al.
ADVANCED MATERIALS (2010)
Water/alcohol soluble conjugated polymers as highly efficient electron transporting/injection layer in optoelectronic devices
Fei Huang et al.
CHEMICAL SOCIETY REVIEWS (2010)
Interface investigation and engineering - achieving high performance polymer photovoltaic devices
Li-Min Chen et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
All-conjugated polyelectrolyte block copolymers
Andrea Gutacker et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Structure and Surfactochromic Properties of Conjugated Polyelectrolyte (CPE): Surfactant Complexes between a Cationic Polythiophene and SDS in Water
Matti Knaapila et al.
LANGMUIR (2010)
Anatase Mesoporous TiO2 Nanofibers with High Surface Area for Solid-State Dye-Sensitized Solar Cells
Wei Zhang et al.
SMALL (2010)
Doping of the Metal Oxide Nanostructure and its Influence in Organic Electronics
Mi-Hyae Park et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Recent Progress in Polymer Solar Cells: Manipulation of Polymer: Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells
Li-Min Chen et al.
ADVANCED MATERIALS (2009)
Highly Efficient Nanoporous TiO2-Polythiophene Hybrid Solar Cells Based on Interfacial Modification Using a Metal-Free Organic Dye
Rui Zhu et al.
ADVANCED MATERIALS (2009)
Conjugated Polyelectrolytes: Synthesis, Photophysics, and Applications
Hui Jiang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2009)
Polymer solar cells with enhanced open-circuit voltage and efficiency
Hsiang-Yu Chen et al.
NATURE PHOTONICS (2009)
Self-organized buffer layers in organic solar cells
Qingshuo Wei et al.
ADVANCED MATERIALS (2008)
Polymer solar cells that use self-assembled-monolayer-modified ZnO/Metals as cathodes
Hin-Lap Yip et al.
ADVANCED MATERIALS (2008)
Organic photovoltaics - Polymer-fullerene composite solar cells
Barry C. Thompson et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)
Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer
Hua-Hsien Liao et al.
APPLIED PHYSICS LETTERS (2008)
Use of the β-phase of poly(9,9-dioctylfluorene) as a probe into the interfacial interplay for the mixed bilayer films formed by sequential spin-coating
Rui Zhu et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2008)
A conjugated, neutral surfactant as electron-injection material for high-efficiency polymer light-emitting diodes
Fei Huang et al.
ADVANCED MATERIALS (2007)
Enhancing the photovoltage of polymer solar cells by using a modified cathode
Fengling Zhang et al.
ADVANCED MATERIALS (2007)
New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer
JY Kim et al.
ADVANCED MATERIALS (2006)
High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends
G Li et al.
NATURE MATERIALS (2005)
Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology
WL Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2005)
Multilayer polymer light-emitting diodes: White-light emission with high efficiency
X Gong et al.
ADVANCED MATERIALS (2005)
Water/methanol-soluble conjugated copolymer as an electron-transport layer in polymer light-emitting diodes
WL Ma et al.
ADVANCED MATERIALS (2005)
High-efficiency, environment-friendly electroluminescent polymers with stable high work function metal as a cathode: Green- and yellow-emitting conjugated polyfluorene polyelectrolytes and their neutral precursors
F Huang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2004)
Efficient electron injection from a bilayer cathode consisting of aluminum and alcohol-/water-soluble conjugated polymers
HB Wu et al.
ADVANCED MATERIALS (2004)
A simple method to generate side-chain derivatives of regioregular polythiophene via the GRIM metathesis and post-polymerization functionalization
L Zhai et al.
MACROMOLECULES (2003)
Vertically integrated electronic circuits via a combination of self-assembled polyelectrolytes, ink-jet printing, and electroless metal plating processes
TF Guo et al.
LANGMUIR (2002)
Tuning the properties of conjugated polyelectrolytes through surfactant complexation
LH Chen et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2000)