Effect of interfacial solute segregation on ductile fracture of Al-Cu-Sc alloys

Three-dimensional atom probe analysis is employed to characterize the Sc segregation at theta'/alpha-Al interfaces in Al-2.5 wt.% Cu-0.3 wt.% Sc alloys aged at 473, 523 and 573 K, respectively. The interfacial Sc concentration is quantitatively evaluated and the change in interfacial energy caused by Sc segregation is assessed, which is in turn correlated to yield strength and ductility of the alloys. The strongest interfacial Sc segregation is generated in the 523 K-aged alloy, resulting in an interfacial Sc concentration about 10 times greater than that in the matrix and a reduction of similar to 25% in interfacial energy. Experimental results show that the interfacial Sc segregation promotes theta' precipitation and enhances the strengthening response. A scaling relationship between the interfacial energy and precipitation strengthening increment is proposed to account for the most notable strengthening effect observed in the 523 K-aged alloy, which is similar to 2.5 times that in its Sc-free counterpart and times that in the 473 and 573 K-aged Al-Cu-Sc alloys. The interfacial Sc segregation, however, causes a sharp drop in the ductility when the precipitate radius is larger than similar to 200 nm in the 523 K-aged alloy, indicative of a transition in fracture mechanisms. The underlying fracture mechanism for the low ductility regime, revealed by in situ transmission electron microscopy tensile testing, is that interfacial decohesion occurs at the theta' precipitates ahead of crack tip and favorably aids the crack propagation. A micromechanical model is developed to rationalize the precipitate size-dependent transition in fracture mechanisms by taking into account the competition between interfacial voiding and matrix Al rupture that is tailored by interfacial Sc segregation. (C) 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.