Novel features of radiation-induced segregation and radiation-induced precipitation in austenitic stainless steels

Three stainless steel alloys, high-purity 304 (HP304), high-purity 304 with high Si (HP304 + Si) and commercial purity 304 (CP304), were irradiated with 2 MeV protons to a dose of 5 dpa at 360 degrees C and subsequently examined using atom probe tomography (APT) and scanning transmission electron microscopy-energy dispersive X-ray spectrometry (STEM EDS). Several novel features of radiation-induced segregation and radiation-induced precipitation were observed. There is a significant variation in the composition of enriched and depleted elements in the grain boundary plane and along the dislocation loop core. Boron segregation to the grain boundary prior to irradiation is not affected by the irradiation. Phosphorus segregation is enhanced by irradiation. Carbon depletes at the grain boundary and may be affected by co-segregation with Cr. APT and STEM EDS measurements are in excellent agreement for almost all the elements studied. The segregation behavior of elements at dislocations mirrors that at the grain boundary, but at a lower magnitude, except for Si. Ni/Si-rich clusters formed in irradiated HP304 + Si and CP304 are probably the precursors of gamma' or other Si- and Ni-rich phases. Copper depletion was observed at both the grain boundary and the dislocation loops. Regions adjacent to the depleted zones were sites for Cu cluster formation, which were also spatially correlated with Ni/Si-rich clusters. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.