Load partitioning in honeycomb-like silicon carbide aluminum alloy composites

A 50/50 vol.% Al/SiC composite was made via melt infiltration of an aluminum alloy into a porous beech wood-derived SiC preform. The honeycomb-like composite microstructure consisted of an interconnected SiC phase surrounding discrete Al fibers aligned in the growth direction of the beech wood. High energy synchrotron X-ray diffraction was used to measure the volume averaged lattice strains in both the SiC and Al phases during in situ compressive loading up to an applied stress of -530 MPa. Load transfer from the Al to the SiC was observed, and the Al yielded at an applied stress of above -213 MPa. The elastic behavior of the composite was modeled with both an isostrain rule of mixtures calculation and variational bounds for the effective elastic modulus. Furthermore, calculations of the von Mises effective stress of the SiC and Al phases showed that the wood-derived SiC was a more effective reinforcement than either SiC particle- or whisker-rein forced composites. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.