Initial Design and Experimental Evaluation of a Pneumatic Interference Actuator

Substantial device mass and control complexity can hinder the impact of wearable robotic technologies, such as exoskeletons. Thus, despite promising previous research, the development of a simple, lightweight actuator for these systems has not yet been fully realized. The purpose of this study was to derive and demonstrate a proof-of-concept for a pneumatic interference actuator (PIA)a lightweight, soft actuator able to produce torque by the self-intersection of a fabric balloon that arises from changes in physical geometry. General closed-form equations are derived to express the expected actuator torque and mechanical work as functions of the balloon geometry, pressure, and deflection angle. Hard and soft cylindrical physical prototypes were constructed to assess the accuracy of the mathematical models. The proposed mathematical model was found to agree with the pressure-volume relationship and successfully predict the maximum torque as a function of geometry, pressure, and deflection at nonzero deflection angles. Peak powers up to 122.1 +/- 10.0 W (mean +/- standard deviation), with a resting internal pressure of 158.0 +/- 0.2kPa, were observed from the hard actuator prototype. For the soft actuator prototype, peak powers of 97.9 +/- 21.1 W were observed at a resting pressure of 166.8kPa. The work performed was within 3.2%+/- 3.4% and 14.4%+/- 8.2% of theoretical values across all trials, and within 19.1%+/- 4.4% of theoretical values when compared to the torque-angle relationship. This study highlights the promise of utilizing the self-intersection of a PIA to perform human-scale mechanical work, and future research will focus on implementations for wearable robotic systems.