Related references
Note: Only part of the references are listed.Efficient and Air-Stable Mixed-Cation Lead Mixed-Halide Perovskite Solar Cells with n-Doped Organic Electron Extraction Layers
Zhiping Wang et al.
ADVANCED MATERIALS (2017)
Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells
Qi Jiang et al.
NATURE ENERGY (2017)
Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films
Qi Wang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Cesium power: low Cs+ levels impart stability to perovskite solar cells
Melepurath Deepa et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)
Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells
Woon Seok Yang et al.
SCIENCE (2017)
Colloidally prepared La-doped BaSnO3 electrodes for efficient, photostable perovskite solar cells
Seong Sik Shin et al.
SCIENCE (2017)
Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells
Enbing Bi et al.
NATURE COMMUNICATIONS (2017)
Cesium Doped NiOx as an Efficient Hole Extraction Layer for Inverted Planar Perovskite Solar Cells
Wei Chen et al.
ADVANCED ENERGY MATERIALS (2017)
Eliminated hysteresis and stabilized power output over 20% in planar heterojunction perovskite solar cells by compositional and surface modifications to the low-temperature-processed TiO2 layer
Feilong Cai et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Management of perovskite intermediates for highly efficient inverted planar heterojunction perovskite solar cells
Yingdong Xia et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Solution-processed CuOx as an efficient hole-extraction layer for inverted planar heterojunction perovskite solar cells
Zhi-Kai Yu et al.
CHINESE CHEMICAL LETTERS (2017)
Thermally Stable MAPbI3 Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 cm2 achieved by Additive Engineering
Yongzhen Wu et al.
ADVANCED MATERIALS (2017)
Indium-Free Perovskite Solar Cells Enabled by Impermeable Tin-Oxide Electron Extraction Layers
Ting Hu et al.
ADVANCED MATERIALS (2017)
Chemical Reduction of Intrinsic Defects in Thicker Heterojunction Planar Perovskite Solar Cells
Zonghao Liu et al.
ADVANCED MATERIALS (2017)
Perovskite Solar Cells: Influence of Hole Transporting Materials on Power Conversion Efficiency
Sadia Ameen et al.
CHEMSUSCHEM (2016)
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
Jingbi You et al.
NATURE NANOTECHNOLOGY (2016)
Efficient Perovskite Hybrid Solar Cells by Highly Electrical Conductive PEDOT:PSS Hole Transport Layer
Xu Huang et al.
ADVANCED ENERGY MATERIALS (2016)
Recent Advances in Improving the Stability of Perovskite Solar Cells
Nguyen Huy Tiep et al.
ADVANCED ENERGY MATERIALS (2016)
Dopant-Free Spiro-Triphenylamine/Fluorene as Hole-Transporting Material for Perovskite Solar Cells with Enhanced Efficiency and Stability
Ya-Kun Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Synergistic Effect of PbI2 Passivation and Chlorine Inclusion Yielding High Open-Circuit Voltage Exceeding 1.15 V in Both Mesoscopic and Inverted Planar CH3NH3PbI3(Cl)-Based Perovskite Solar Cells
Fangyuan Jiang et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
A Strategy to Simplify the Preparation Process of Perovskite Solar Cells by Co-deposition of a Hole-Conductor and a Perovskite Layer
Senyun Ye et al.
ADVANCED MATERIALS (2016)
High-Performance Perovskite Solar Cells with Enhanced Environmental Stability Based on Amphiphile-Modified CH3NH3PbI3
Dongqin Bi et al.
ADVANCED MATERIALS (2016)
Room-Temperature, Hydrochloride-Assisted, One-Step Deposition for Highly Efficient and Air-Stable Perovskite Solar Cells
Jinlong Pan et al.
ADVANCED MATERIALS (2016)
Thin Insulating Tunneling Contacts for Efficient and Water-Resistant Perovskite Solar Cells
Qi Wang et al.
ADVANCED MATERIALS (2016)
Enhancing the grain size of organic halide perovskites by sulfonate-carbon nanotube incorporation in high performance perovskite solar cells
Yong Zhang et al.
CHEMICAL COMMUNICATIONS (2016)
Multilayered Perovskite Materials Based on Polymeric-Ammonium Cations for Stable Large-Area Solar Cell
Kai Yao et al.
CHEMISTRY OF MATERIALS (2016)
Near-Infrared-Absorbing and Dopant-Free Heterocyclic Quinoid-Based Hole-Transporting Materials for Efficient Perovskite Solar Cells
Jen-Shyang Ni et al.
CHEMSUSCHEM (2016)
Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells
Dong Yang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
A large area (70 cm(2)) monolithic perovskite solar module with a high efficiency and stability
Anish Priyadarshi et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Is Cu a stable electrode material in hybrid perovskite solar cells for a 30-year lifetime?
Jingjing Zhao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Entropic stabilization of mixed A-cation ABX(3) metal halide perovskites for high performance perovskite solar cells
Chenyi Yi et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells
T. Jesper Jacobsson et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency
Michael Saliba et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Versatile Molybdenum Isopropoxide for Efficient Mesoporous Perovskite Solar Cells: Simultaneously Optimized Morphology and Interfacial Engineering
Qingxia Fu et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2016)
Ligand-Stabilized Reduced-Dimensionality Perovskites
Li Na Quan et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Rational Design of Dipolar Chromophore as an Efficient Dopant-Free Hole-Transporting Material for Perovskite Solar Cells
Zhong'an Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Dopant-Free Hole-Transporting Material with a C3h Symmetrical Truxene Core for Highly Efficient Perovskite Solar Cells
Chuyi Huang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Graphene oxide/PEDOT:PSS composite hole transport layer for efficient and stable planar heterojunction perovskite solar cells
Da-Young Lee et al.
NANOSCALE (2016)
High-performance inverted planar heterojunction perovskite solar cells based on a solution-processed CuOx, hole transport layer
Weihai Sun et al.
NANOSCALE (2016)
A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells
Xiong Li et al.
SCIENCE (2016)
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Michael Saliba et al.
SCIENCE (2016)
A polymer scaffold for self-healing perovskite solar cells
Yicheng Zhao et al.
NATURE COMMUNICATIONS (2016)
Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity
Qidong Tai et al.
NATURE COMMUNICATIONS (2016)
Polymer Stabilization of Lead(II) Perovskite Cubic Nanocrystals for Semitransparent Solar Cells
Yunlong Guo et al.
ADVANCED ENERGY MATERIALS (2016)
Ionic Liquid Control Crystal Growth to Enhance Planar Perovskite Solar Cells Efficiency
Ji-Youn Seo et al.
ADVANCED ENERGY MATERIALS (2016)
Effect of cesium chloride modification on the film morphology and UV-induced stability of planar perovskite solar cells
Wenzhe Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Enhanced performance and light soaking stability of planar perovskite solar cells using an amine-based fullerene interfacial modifier
Yunhai Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Recent advancements in perovskite solar cells: flexibility, stability and large scale
Meidan Ye et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Synergistic improvements in stability and performance of lead iodide perovskite solar cells incorporating salt additives
Karunakara Moorthy Boopathi et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Doping and alloying for improved perovskite solar cells
Yuanyuan Zhou et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
A review of organic small molecule-based hole-transporting materials for meso-structured organic-inorganic perovskite solar cells
Chin Hoong Teh et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Rejuvenation of perovskite solar cells
You Huang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Boosting the efficiency and the stability of low cost perovskite solar cells by using CuPc nanorods as hole transport material and carbon as counter electrode
Fuguo Zhang et al.
NANO ENERGY (2016)
Hole-Transporting Materials for Perovskite-Sensitized Solar Cells
Pankul Dhingra et al.
ENERGY TECHNOLOGY (2016)
Towards stable and commercially available perovskite solar cells
Nam-Gyu Park et al.
NATURE ENERGY (2016)
Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering
Yongzhen Wu et al.
NATURE ENERGY (2016)
A molecularly engineered hole-transporting material for efficient perovskite solar cells
Michael Saliba et al.
NATURE ENERGY (2016)
Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%
Dongqin Bi et al.
NATURE ENERGY (2016)
Methodologies for high efficiency perovskite solar cells
Nam-Gyu Park
NANO CONVERGENCE (2016)
Spectrum-Dependent Spiro-OMeTAD Oxidization Mechanism in Perovskite Solar Cells
Shen Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Enhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation
Insung Hwang et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Investigation of CH3NH3PbI3 Degradation Rates and Mechanisms in Controlled Humidity Environments Using in Situ Techniques
Jinli Yang et al.
ACS NANO (2015)
Controllable Perovskite Crystallization by Water Additive for High-Performance Solar Cells
Xiu Gong et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Copper(I) Iodide as Hole-Conductor in Planar Perovskite Solar Cells: Probing the Origin of J-V Hysteresis
Gaveshana A. Sepalage et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Efficient Perovskite Hybrid Solar Cells via Ionomer Interfacial Engineering
Kai Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Hybrid Organic-Inorganic Perovskites (HOIPs): Opportunities and Challenges
Joseph Berry et al.
ADVANCED MATERIALS (2015)
Square-Centimeter Solution-Processed Planar CH3NH3PbI3 Perovskite Solar Cells with Efficiency Exceeding 15%
Mengjin Yang et al.
ADVANCED MATERIALS (2015)
Efficient CH3NH3PbI3 Perovskite Solar Cells Employing Nanostructured p-Type NiO Electrode Formed by a Pulsed Laser Deposition
Jong Hoon Park et al.
ADVANCED MATERIALS (2015)
Formation of Thin Films of Organic-Inorganic Perovskites for High-Efficiency Solar Cells
Samuel D. Stranks et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers
Nicholas Aristidou et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
Efficient and reproducible CH3NH3PbI3-x(SCN)x perovskite based planar solar cells
Yani Chen et al.
CHEMICAL COMMUNICATIONS (2015)
Chemical and Electronic Structure Characterization of Lead Halide Perovskites and Stability Behavior under Different Exposures-A Photoelectron Spectroscopy Investigation
Bertrand Philippe et al.
CHEMISTRY OF MATERIALS (2015)
Origin of the Thermal Instability in CH3NH3PbI3 Thin Films Deposited on ZnO
Jinli Yang et al.
CHEMISTRY OF MATERIALS (2015)
High efficiency stable inverted perovskite solar cells without current hysteresis
Chun-Guey Wu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Understanding the rate-dependent J-V hysteresis, slow time component, and aging in CH3NH3PbI3 perovskite solar cells: the role of a compensated electric field
W. Tress et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Hybrid interfacial layer leads to solid performance improvement of inverted perovskite solar cells
Wei Chen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers
Yehao Deng et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Anomalously large interface charge in polarity-switchable photovoltaic devices: an indication of mobile ions in organic-inorganic halide perovskites
Yong Zhao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Highly efficient planar perovskite solar cells through band alignment engineering
Juan Pablo Correa Baena et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Stabilization of the Trigonal High-Temperature Phase of Formamidinium Lead Iodide
Andreas Binek et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)
Temperature- and Component-Dependent Degradation of Perovskite Photovoltaic Materials under Concentrated Sunlight
Ravi K. Misra et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)
Well-Defined Thiolated Nanographene as Hole-Transporting Material for Efficient and Stable Perovskite Solar Cells
Jing Cao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Transformation of the Excited State and Photovoltaic Efficiency of CH3NH3PbI3 Perovskite upon Controlled Exposure to Humidified Air
Jeffrey A. Christians et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Highly Reproducible Perovskite Solar Cells with Average Efficiency of 18.3% and Best Efficiency of 19.7% Fabricated via Lewis Base Adduct of Lead(II) Iodide
Namyoung Ahn et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Duyen H. Cao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%
Senyun Ye et al.
NANO LETTERS (2015)
A facile, solvent vapor-fumigation-induced, self-repair recrystallization of CH3NH3PbI3 films for high-performance perovskite solar cells
Weidong Zhu et al.
NANOSCALE (2015)
Efficient and stable planar heterojunction perovskite solar cells with an MoO3/PEDOT:PSS hole transporting layer
Fuhua Hou et al.
NANOSCALE (2015)
Thiols as interfacial modifiers to enhance the performance and stability of perovskite solar cells
Jing Cao et al.
NANOSCALE (2015)
Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides
Xiong Li et al.
NATURE CHEMISTRY (2015)
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Wei Chen et al.
SCIENCE (2015)
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Woon Seok Yang et al.
SCIENCE (2015)
Perovskite-fullerene hybrid materials suppress hysteresis in planar diodese
Jixian Xu et al.
NATURE COMMUNICATIONS (2015)
Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells
Cheng Bi et al.
NATURE COMMUNICATIONS (2015)
The optoelectronic role of chlorine in CH3NH3PbI3(Cl)-based perovskite solar cells
Qi Chen et al.
NATURE COMMUNICATIONS (2015)
Roles of Fullerene-Based Interlayers in Enhancing the Performance of Organometal Perovskite Thin-Film Solar Cells
Po-Wei Liang et al.
ADVANCED ENERGY MATERIALS (2015)
Formamidinium and Cesium Hybridization for Photo- and Moisture-Stable Perovskite Solar Cell
Jin-Wook Lee et al.
ADVANCED ENERGY MATERIALS (2015)
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Yaoguang Rong et al.
ADVANCED ENERGY MATERIALS (2015)
Stability of Metal Halide Perovskite Solar Cells
Tomas Leijtens et al.
ADVANCED ENERGY MATERIALS (2015)
High-performance and high-durability perovskite photovoltaic devices prepared using ethylammonium iodide as an additive
Hsiang-Lin Hsu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Interface engineering of perovskite solar cells with PEO for improved performance
H. P. Dong et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Organic solvent vapor sensitive methylammonium lead trihalide film formation for efficient hybrid perovskite solar cells
Jiarong Lian et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Perovskite solar cells based on small molecule hole transporting materials
T. Swetha et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Degradation observations of encapsulated planar CH3NH3PbI3 perovskite solar cells at high temperatures and humidity
Yu Han et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Perovskite-based solar cells: impact of morphology and device architecture on device performance
Teddy Salim et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Highly efficient and stable planar perovskite solar cells with reduced graphene oxide nanosheets as electrode interlayer
Jun-Seok Yeo et al.
NANO ENERGY (2015)
High-Performance and Environmentally Stable Planar Heterojunction Perovskite Solar Cells Based on a Solution-Processed Copper-Doped Nickel Oxide Hole-Transporting Layer
Jong H. Kim et al.
ADVANCED MATERIALS (2015)
Layer-by-Layer Growth of CH3NH3PbI3-xClx for Highly Efficient Planar Heterojunction Perovskite Solar Cells
Yonghua Chen et al.
ADVANCED MATERIALS (2015)
Giant switchable photovoltaic effect in organometal trihalide perovskite devices (vol 14, pg 193, 2014)
Zhengguo Xiao et al.
NATURE MATERIALS (2015)
Perovskite Solar Cells: From Materials to Devices
Hyun Suk Jung et al.
SMALL (2015)
Giant switchable photovoltaic effect in organometal trihalide perovskite devices
Zhengguo Xiao et al.
NATURE MATERIALS (2015)
Highly Conductive PEDOT:PSS Treated with Formic Acid for ITO-Free Polymer Solar Cells
Desalegn A. Mengistie et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
In Situ Intercalation Dynamics in Inorganic-Organic Layered Perovskite Thin Films
Shahab Ahmad et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Morphological Control for High Performance, Solution-Processed Planar Heterojunction Perovskite Solar Cells
Giles E. Eperon et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Effect of Annealing Temperature on Film Morphology of Organic-Inorganic Hybrid Pervoskite Solid-State Solar Cells
Amalie Dualeh et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Performance and Stability Enhancement of Dye-Sensitized and Perovskite Solar Cells by Al Doping of TiO2
Sandeep K. Pathak et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Perovskite-Based Hybrid Solar Cells Exceeding 10% Efficiency with High Reproducibility Using a Thin Film Sandwich Approach
Bert Conings et al.
ADVANCED MATERIALS (2014)
Solvent Annealing of Perovskite-Induced Crystal Growth for Photovoltaic-Device Efficiency Enhancement
Zhengguo Xiao et al.
ADVANCED MATERIALS (2014)
High-Efficiency Perovskite Solar Cells Based on the Black Polymorph of HC(NH2)2PbI3
Jin-Wook Lee et al.
ADVANCED MATERIALS (2014)
The effect of ALD-Zno layers on the formation of CH3NH3PbI3 with different perovskite precursors and sintering temperatures
Xu Dong et al.
CHEMICAL COMMUNICATIONS (2014)
Lead-free organic-inorganic tin halide perovskites for photovoltaic applications
Nakita K. Noel et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture
Florian Machui et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process
Qi Wang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
A dopant-free hole-transporting material for efficient and stable perovskite solar cells
Jian Liu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers
Zhengguo Xiao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells
Giles E. Eperon et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Organohalide lead perovskites for photovoltaic applications
Peng Gao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Formamidinium-Containing Metal-Halide: An Alternative Material for Near-IR Absorption Perovskite Solar Cells
Teck Ming Koh et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Solution-Processed Copper Iodide as an Inexpensive and Effective Anode Buffer Layer for Polymer Solar Cells
Weihai Sun et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Hybrid Lead Halide Iodide and Lead Halide Bromide in Efficient Hole Conductor Free Perovskite Solar Cell
Sigalit Aharon et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Effects of Surface Blocking Layer of Sb2S3 on Nanocrystalline TiO2 for CH3NH3PbI3 Perovskite Solar Cells
Seigo Ito et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Hole-Conductor-Free, Metal-Electrode-Free TiO2/CH3NH3PbI3 Heterojunction Solar Cells Based on a Low-Temperature Carbon Electrode
Huawei Zhou et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
The Importance of Perovskite Pore Filling in Organometal Mixed Halide Sensitized TiO2-Based Solar Cells
Tomas Leijtens et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
Recombination Study of Combined Halides (Cl, Br, I) Perovskite Solar Cells
Belen Suarez et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
Anomalous Hysteresis in Perovskite Solar Cells
Henry J. Snaith et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
Surfactant enhanced surface coverage of CH3NH3PbI3-xClx perovskite for highly efficient mesoscopic solar cells
Yanli Ding et al.
JOURNAL OF POWER SOURCES (2014)
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Qi Chen et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
An Inorganic Hole Conductor for Organo-Lead Halide Perovskite Solar Cells. Improved Hole Conductivity with Copper Iodide
Jeffrey A. Christians et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Carbon Nanotube/Polymer Composites as a Highly Stable Hole Collection Layer in Perovskite Solar Cells
Severin N. Habisreutinger et al.
NANO LETTERS (2014)
Cation-Induced Band-Gap Tuning in Organohalide Perovskites: Interplay of Spin-Orbit Coupling and Octahedra Tilting
Anna Amat et al.
NANO LETTERS (2014)
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Jarvist M. Frost et al.
NANO LETTERS (2014)
An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive
Chuantian Zuo et al.
NANOSCALE (2014)
Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells
Nam Joong Jeon et al.
NATURE MATERIALS (2014)
Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques
Dianyi Liu et al.
NATURE PHOTONICS (2014)
Lead-free solid-state organic-inorganic halide perovskite solar cells
Feng Hao et al.
NATURE PHOTONICS (2014)
Depletion region effect of highly efficient hole conductor free CH3NH3PbI3 perovskite solar cells
Sigalit Aharon et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Evaluation of moisture ingress from the perimeter of photovoltaic modules
Michael D. Kempe et al.
PROGRESS IN PHOTOVOLTAICS (2014)
A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability
Anyi Mei et al.
SCIENCE (2014)
Interface engineering of highly efficient perovskite solar cells
Huanping Zhou et al.
SCIENCE (2014)
Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency
Peng Qin et al.
NATURE COMMUNICATIONS (2014)
Excitons versus free charges in organo-lead tri-halide perovskites
Valerio D'Innocenzo et al.
NATURE COMMUNICATIONS (2014)
Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells
Guangda Niu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Effect of CH3NH3PbI3 thickness on device efficiency in planar heterojunction perovskite solar cells
Dianyi Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Understanding the formation and evolution of interdiffusion grown organolead halide perovskite thin films by thermal annealing
Cheng Bi et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Planar heterojunction perovskite/PC71BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process
Chien-Hung Chiang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
CH3NH3PbI3 Perovskite/Fullerene Planar-Heterojunction Hybrid Solar Cells
Jun-Yuan Jeng et al.
ADVANCED MATERIALS (2013)
Improvement in Photovoltaic Performance of Dye-sensitized Solar Cells by Cosensitization with an Organometal Halide Perovskite
Kenji Kakiage et al.
CHEMISTRY LETTERS (2013)
MAPbl3-x Clx Mixed Halide Perovskite for Hybrid Solar Cells: The Role of Chloride as Dopant on the Transport and Structural Properties
Silvia Colella et al.
CHEMISTRY OF MATERIALS (2013)
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
James M. Ball et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Semiconducting Tin and Lead Iodide Perovskites with Organic Cations: Phase Transitions, High Mobilities, and Near-Infrared Photoluminescent Properties
Constantinos C. Stoumpos et al.
INORGANIC CHEMISTRY (2013)
First Pseudohalogen Polymer Electrolyte for Dye-Sensitized Solar Cells Promising for In Situ Photopolymerization
Federico Bella et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2013)
Importance of Spin-Orbit Coupling in Hybrid Organic/Inorganic Perovskites for Photovoltaic Applications
Jacky Even et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)
Chemical Management for Colorful, Efficient, and Stable Inorganic-Organic Hybrid Nanostructured Solar Cells
Jun Hong Noh et al.
NANO LETTERS (2013)
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Julian Burschka et al.
NATURE (2013)
Efficient planar heterojunction perovskite solar cells by vapour deposition
Mingzhen Liu et al.
NATURE (2013)
Efficient inorganic-organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors
Jin Hyuck Heo et al.
NATURE PHOTONICS (2013)
Lithium salts as redox active p-type dopants for organic semiconductors and their impact in solid-state dye-sensitized solar cells
Antonio Abate et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH3NH3PbI3
Guichuan Xing et al.
SCIENCE (2013)
Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber
Samuel D. Stranks et al.
SCIENCE (2013)
Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells
Tomas Leijtens et al.
NATURE COMMUNICATIONS (2013)
Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates
Pablo Docampo et al.
NATURE COMMUNICATIONS (2013)
Post modification of perovskite sensitized solar cells by aluminum oxide for enhanced performance
Wenzhe Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Michael M. Lee et al.
SCIENCE (2012)
Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
Hui-Seon Kim et al.
SCIENTIFIC REPORTS (2012)
6.5% efficient perovskite quantum-dot-sensitized solar cell
Jeong-Hyeok Im et al.
NANOSCALE (2011)
ZnO Nanostructures for Dye-Sensitized Solar Cells
Qifeng Zhang et al.
ADVANCED MATERIALS (2009)
Materials Availability Expands the Opportunity for Large-Scale Photovoltaics Deployment
Cyrus Wadia et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2009)
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Akihiro Kojima et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
Exciton diffusion measurements in poly(3-hexylthiophene)
Paul E. Shaw et al.
ADVANCED MATERIALS (2008)
Photo- and thermal degradation of MDMO-PPV:PCBM blends
Sylvain Chambon et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2007)
Enhanced charge mobility in a molecular hole transporter via addition of redox inactive ionic dopant:: Implication to dye-sensitized solar cells
Henry J. Snaith et al.
APPLIED PHYSICS LETTERS (2006)
Lithium ion effect on electron injection from a photoexcited coumarin derivative into a TiO2 nanocrystalline film investigated by visible-to-IR ultrafast spectroscopy
A Furube et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2005)
Share Paper
