Related references
Note: Only part of the references are listed.Continuous functionally graded porous titanium scaffolds manufactured by selective laser melting for bone implants
Changjun Han et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Fabrication of multiple-layered gradient cellular metal scaffold via electron beam melting for segmental bone reconstruction
Maria A. Surmeneva et al.
MATERIALS & DESIGN (2017)
Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials
Mathieu Dumas et al.
MATERIALS & DESIGN (2017)
Compressive properties of functionally graded lattice structures manufactured by selective laser melting
Sing Ying Choy et al.
MATERIALS & DESIGN (2017)
Stiffness and strength tailoring of cobalt chromium graded cellular structures for stress-shielding reduction
Sakkadech Limmahakhun et al.
MATERIALS & DESIGN (2017)
Metallic bone fixation implants: a novel design approach for reducing the stress shielding phenomenon
Abdulsalam A. Al-Tamimi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Additively Manufactured Scaffolds for Bone Tissue Engineering and the Prediction of their Mechanical Behavior: A Review
Xiang-Yu Zhang et al.
MATERIALS (2017)
Additively manufactured metallic porous biomaterials based on minimal surfaces: A unique combination of topological, mechanical, and mass transport properties
F. S. L. Bobbert et al.
ACTA BIOMATERIALIA (2017)
Functional response of osteoblasts in functionally gradient titanium alloy mesh arrays processed by 3D additive manufacturing
K. C. Nune et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2017)
Functionally Graded Ti-6Al-4V Meshes with High Strength and Energy Absorption
Shujun Li et al.
ADVANCED ENGINEERING MATERIALS (2016)
Deformation and failure behaviour of Ti-6Al-4V lattice structures manufactured by selective laser melting (SLM)
Maciej Mazur et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Osteoblast functions in functionally graded Ti-6Al-4V mesh structures
K. C. Nune et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2016)
Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs
Swee Leong Sing et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2016)
High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints
Sajad Arabnejad et al.
ACTA BIOMATERIALIA (2016)
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
Xiaojian Wang et al.
BIOMATERIALS (2016)
Biocompatibility and mechanical behaviour of three-dimensional scaffolds for biomedical devices: process-structure-property paradigm
A. Kumar et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting
S. Zhao et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment
Naoya Taniguchi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Role of pore size and morphology in musculo-skeletal tissue regeneration
Roman A. Perez et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting
I. Maskery et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
In vitro and in vivo study of additive manufactured porous Ti6Al4V scaffolds for repairing bone defects
Guoyuan Li et al.
SCIENTIFIC REPORTS (2016)
Metallic microlattice materials: A current state of the art on manufacturing, mechanical properties and applications
M. G. Rashed et al.
MATERIALS & DESIGN (2016)
Influence of Microarchitecture on Osteoconduction and Mechanics of Porous Titanium Scaffolds Generated by Selective Laser Melting
Michael de Wild et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2016)
Review of selective laser melting: Materials and applications
C. Y. Yap et al.
APPLIED PHYSICS REVIEWS (2015)
Metals for bone implants. Part 1. Powder metallurgy and implant rendering
Mohsen Taheri Andani et al.
ACTA BIOMATERIALIA (2014)
Current trends in the design of scaffolds for computer-aided tissue engineering
S. M. Giannitelli et al.
ACTA BIOMATERIALIA (2014)
Influence of cell shape on mechanical properties of Ti-6Al-4V meshes fabricated by electron beam melting method
S. J. Li et al.
ACTA BIOMATERIALIA (2014)
Biocompatibility of Advanced Manufactured Titanium Implants-A Review
Alfred T. Sidambe
MATERIALS (2014)
Fabrication and Mechanical Characterisation of Titanium Lattices with Graded Porosity
William van Grunsven et al.
METALS (2014)
Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique
M. Smith et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Study on the designing rules and processability of porous structure based on selective laser melting (SLM)
Di Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects
Johan Van der Stok et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2013)
Biocompatibility of Ti-alloys for long-term implantation
Mohamed Abdel-Hady Gepreel et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures
Grzegorz Pyka et al.
MATERIALS (2013)
The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds
S. Van Bael et al.
ACTA BIOMATERIALIA (2012)
Development of new metallic alloys for biomedical applications
Mitsuo Niinomi et al.
ACTA BIOMATERIALIA (2012)
An Osteoconductive, Osteoinductive, and Osteogenic Tissue-Engineered Product for Trauma and Orthopaedic Surgery: How Far Are We?
Wasim S. Khan et al.
STEM CELLS INTERNATIONAL (2012)
Overview of current additive manufacturing technologies and selected applications
Timothy J. Horn et al.
SCIENCE PROGRESS (2012)
Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds
N. Sudarmadji et al.
ACTA BIOMATERIALIA (2011)
Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting
A. Fukuda et al.
ACTA BIOMATERIALIA (2011)
Minimal surface scaffold designs for tissue engineering
Sebastian C. Kapfer et al.
BIOMATERIALS (2011)
Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures
S. Van Bael et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting
B. Gorny et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications
Jayanthi Parthasarathy et al.
Journal of Manufacturing Processes (2011)
The effect of mean pore size on cell attachment, proliferation and migration in collagen-glycosaminoglycan scaffolds for bone tissue engineering
Ciaral M. Murphy et al.
BIOMATERIALS (2010)
Scaffold Vascularization: A Challenge for Three-Dimensional Tissue Engineering
H. Bramfeldt et al.
CURRENT MEDICINAL CHEMISTRY (2010)
Characterization of cellular solids in Ti6Al4V for orthopaedic implant applications: Trabecular titanium
E. Marin et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2010)
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Jayanthi Parthasarathy et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2010)
Characterization of Ti-6Al-4V open cellular foams fabricated by additive manufacturing using electron beam melting
L. E. Murr et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays
L. E. Murr et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)
Rapid Prototyping: Porous Titanium Alloy Scaffolds Produced by Selective Laser Melting for Bone Tissue Engineering
Patrick H. Warnke et al.
TISSUE ENGINEERING PART C-METHODS (2009)
Metallic Scaffolds for Bone Regeneration
Kelly Alvarez et al.
MATERIALS (2009)
Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
Peter Heinl et al.
ACTA BIOMATERIALIA (2008)
Engineering functionally graded tissue engineering scaffolds
K. F. Leong et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2008)
Properties of Ti-6Al-4V non-stochastic lattice structures fabricated via electron beam melting
O. Cansizoglu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Vascularization in tissue engineering
Jeroen Rouwkema et al.
TRENDS IN BIOTECHNOLOGY (2008)
State of the art and future directions of scaffold-based bone engineering from a biomaterials perspective
Dietmar Werner Hutmacher et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2007)
Bone ingrowth in porous titanium implants produced by 3D fiber deposition
Jia Ping Li et al.
BIOMATERIALS (2007)
Porous scaffold design for tissue engineering (vol 4, pg 518, 2005)
SJ Hollister
NATURE MATERIALS (2006)
The properties of foams and lattices
MF Ashby
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)
Creation of a unit block library of architectures for use in assembled scaffold engineering
MA Wettergreen et al.
COMPUTER-AIDED DESIGN (2005)
Porosity of 3D biomaterial scaffolds and osteogenesis
V Karageorgiou et al.
BIOMATERIALS (2005)
Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue
HH Bayraktar et al.
JOURNAL OF BIOMECHANICS (2004)
Dependence of yield strain of human trabecular bone on anatomic site
EF Morgan et al.
JOURNAL OF BIOMECHANICS (2001)
Scaffolds in tissue engineering bone and cartilage
DW Hutmacher
BIOMATERIALS (2000)