Related references
Note: Only part of the references are listed.Influence of carbon nanotubes on thermal response and reaction to fire properties of carbon fibre-reinforced plastic material
Thomas J. Schuster et al.
JOURNAL OF COMPOSITE MATERIALS (2018)
Static and Dynamic Behavior of Fibrous Polymeric Composite Materials at Different Environmental Conditions
Kishore Kumar Mahato et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)
Nanoclay Addition and Core Materials Effect on Impact and Damage Tolerance Capability of Glass Fiber Skin Sandwich Laminates
N. R. R. Anbusagar et al.
SILICON (2018)
Characterization of adhesive interphase between epoxy and cement paste via Raman spectroscopy and mercury intrusion porosimetry
Jovan Tatar et al.
CEMENT & CONCRETE COMPOSITES (2018)
Long-term residual anchorage resistance of gradient anchorages for prestressed CFRP strips
Yunus Emre Harmanci et al.
COMPOSITES PART B-ENGINEERING (2018)
Fatigue behaviour at elevated temperature of RC slabs strengthened with EB CFRP strips
Juan Manuel Gallego et al.
COMPOSITES PART B-ENGINEERING (2018)
Reinforcements in multi-scale polymer composites: Processing, properties, and applications
Garima Mittal et al.
COMPOSITES PART B-ENGINEERING (2018)
Durability of an epoxy adhesive used in civil structural applications
Joao M. Sousa et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
The effect of traditional flame retardants, nanoclays and carbon nanotubes in the fire performance of epoxy resin composites
Marta S. S. Martins et al.
FIRE AND MATERIALS (2017)
Bond Properties of FRP-concrete Interface with Nano-modified Epoxy Resin under Wet-dry Cycles
Yue Li et al.
KSCE JOURNAL OF CIVIL ENGINEERING (2017)
Repair of heat-damaged RC columns using carbon nanotubes modified CFRP
Mohammad R. Irshidat et al.
MATERIALS AND STRUCTURES (2017)
Water absorption, residual mechanical and thermal properties of hydrothermally conditioned nano-Al2O3 enhanced glass fiber reinforced polymer composites
Ramesh Kumar Nayak et al.
POLYMER BULLETIN (2017)
Synthesis, Morphologies and Building Applications of Nanostructured Polymers
Yong Lu et al.
POLYMERS (2017)
Creep behaviour of graphite oxide nanoplates embedded glass fiber/epoxy composites: Emphasizing the role of temperature and stress
Sohan Kumar Ghosh et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Durability of of RC slabs strengthened with prestressed CFRP laminate strips under different environmental and loading conditions
Luis Correia et al.
COMPOSITES PART B-ENGINEERING (2017)
Repair of damaged end regions of PC beams using externally bonded FRP shear reinforcement
Ian Shaw et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Development of physical and mechanical properties of a cold-curing structural adhesive in a wet bridge environment
M. Savvilotidou et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effects of aging in dry environment on physical and mechanical properties of a cold-curing structural epoxy adhesive for bridge construction
M. Savvilotidou et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
CNT/polymer interface in polymeric composites and its sensitivity study at different environments
Rajesh Kumar Prusty et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2017)
Assessment of bond strength in CFRP retrofitted beams under marine environment
Mahbube Subhani et al.
COMPOSITE STRUCTURES (2016)
FRP-brick masonry bond degradation under hygrothermal conditions
Hamid Maljaee et al.
COMPOSITE STRUCTURES (2016)
Bond of GFRP strips on modern and historic brickwork masonry
R. Capozucca et al.
COMPOSITE STRUCTURES (2016)
Mechanical performance of CNT-filled glass fiber/epoxy composite in in-situ elevated temperature environments emphasizing the role of CNT content
Dinesh Kumar Rathore et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Effects of different environmental conditions on the mechanical characteristics of a structural epoxy
Patricia Silva et al.
COMPOSITES PART B-ENGINEERING (2016)
Influence of temperature on the curing of an epoxy adhesive and its influence on bond behaviour of NSM-CFRP systems
Andrea Benedetti et al.
COMPOSITES PART B-ENGINEERING (2016)
Moisture-induced degradation of interfacial bond in FRP-strengthened masonry
Hamid Maljaee et al.
COMPOSITES PART B-ENGINEERING (2016)
Fire performance of prefabricated modular units using organoclay/glass fibre reinforced polymer composite
Q. T. Nguyen et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Comparison of laboratory and field environmental conditioning on FRP-concrete bond durability
Jovan Tatar et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Experimental and numerical investigations on the thermal response of multilayer glass fibre/unsaturated polyester/organoclay composite
Quynh T. Nguyen et al.
FIRE AND MATERIALS (2016)
Implementation of Bond Durability in the Design of Flexural Members with Externally Bonded FRP
Jovan Tatar et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2016)
Bond Durability Factor for Externally Bonded CFRP Systems in Concrete Structures
Jovan Tatar et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2016)
Parametric Study of Strain Rate Effects on Nanoparticle-Reinforced Polymer Composites
B. Soltannia et al.
JOURNAL OF NANOMATERIALS (2016)
Polymer nanocomposites for structural applications: Recent trends and new perspectives
J. Silvestre et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2016)
Subcritical debonding of FRP-to-concrete bonded interface under synergistic effect of load, moisture, and temperature
Shahrooz Amidi et al.
MECHANICS OF MATERIALS (2016)
Moringa oleifera (Drum Stick Vegetable Fibre) Based Nanocomposites with Natural Rubber: Preparation and Characterizations
K. J. Sajithkumar et al.
WASTE AND BIOMASS VALORIZATION (2016)
Study of sandwich effect on nanoclay modified polyester resin GFR face sheet laminates
N. R. R. Anbusagar et al.
COMPOSITE STRUCTURES (2015)
Glass transition evaluation of commercially available epoxy resins used for civil engineering applications
Julien Michels et al.
COMPOSITES PART B-ENGINEERING (2015)
Effects of hygrothermal conditioning on epoxy adhesives used in FRP composites
B. Paige Blackburn et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Environmental effects on the adhesion properties of nanostructured epoxy-silica hybrids
Francesca Lionetto et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Durability of the Bond between CFRP Plates and Concrete Exposed to Harsh Environments
Adil K. Al-Tamimi et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)
Fire reaction of nanoclay-doped PA6 composites reinforced with continuous glass fibers and produced by commingling technique
M. Monti et al.
POLYMER DEGRADATION AND STABILITY (2015)
Durability study of vinylester/silicate nanocomposites for civil engineering applications
Florent Gauvin et al.
POLYMER DEGRADATION AND STABILITY (2015)
Quasistatic and Dynamic Mechanical Characterization of a Woven Carbon Fiber-Zinc Oxide Nanowires-Epoxy Composite
N. Masghouni et al.
POLYMER COMPOSITES (2015)
Mechanical Properties of a Hybrid Nanocomposite Under Room Temperature and Hot-Wet Environments
N. Jagannathan et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2015)
An investigation on the fatigue based delamination of woven carbon-epoxy composite laminates reinforced with polyamide nano fibers
T. M. Brugo et al.
XXIII ITALIAN GROUP OF FRACTURE MEETING, IGFXXIII (2015)
On estimates of durability of FRP based on accelerated tests
Manuel A. G. Silva et al.
COMPOSITE STRUCTURES (2014)
Effects of hygrothermal aging on glass-fibre reinforced polymer laminates and adhesive of FRP composite bridge: Moisture diffusion characteristics
Xu Jiang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Hybrid carbon nanotube-carbon fiber composites with improved in-plane mechanical properties
A. Y. Boroujeni et al.
COMPOSITES PART B-ENGINEERING (2014)
Creep of epoxy-clay nanocomposite adhesive at the FRP interface: A multi-scale investigation
Sherif H. Aboubakr et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
Hygrothermal durability of bond in FRP-strengthened masonry
Bahman Ghiassi et al.
MATERIALS AND STRUCTURES (2014)
Synthesis and Modifications of Epoxy Resins and Their Composites: A Review
Nagarjuna Reddy Paluvai et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2014)
Nanoparticle reinforced epoxy gelcoats for fiber-plastic composites under multiple load
Sebastian Scholz et al.
PROGRESS IN ORGANIC COATINGS (2014)
Surface Modification of Cured Cement Pastes by Silane Coupling Agents
Andrew Stewart et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Development and characterization of epoxy nanocomposites based on nano-structured oil palm ash
H. P. S. Abdul Khalil et al.
COMPOSITES PART B-ENGINEERING (2013)
Interlaminar fracture toughness and CAI strength of fibre-reinforced composites with nanoparticles - A review
Youhong Tang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Strengthening fibre/matrix interphase by fibre surface modification and nanoparticle incorporation into the matrix
P. Drescher et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
A new fire resistant FRP for externally bonded concrete repair
Gefu Ji et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Interactions of fully formulated epoxy with model cement hydrates
Fatma Djouani et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2013)
Long-Term Development of Thermophysical and Mechanical Properties of Cold-Curing Structural Adhesives Due to Post-Curing
Omar Moussa et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Effect of silane coupling agent on the durability of epoxy adhesion for structural strengthening applications
Sungwon Choi et al.
POLYMER ENGINEERING AND SCIENCE (2013)
Fire retardant evaluation of carbon nanofiber/graphite nanoplatelets nanopaper-based coating under different heat fluxes
Jinfeng Zhuge et al.
COMPOSITES PART B-ENGINEERING (2012)
Effect of curing conditions on strength development in an epoxy resin for structural strengthening
Christoph Czaderski et al.
COMPOSITES PART B-ENGINEERING (2012)
Tensile behavior of epoxy based FRP composites under extreme service conditions
Fabio Nardone et al.
COMPOSITES PART B-ENGINEERING (2012)
Effects of humid environment on thermal and mechanical properties of a cold-curing structural epoxy adhesive
Mariateresa Lettieri et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Natural and Artificial Weathering Effects on Cold-Cured Epoxy Resins
Mariateresa Lettieri et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties
L. C. Hollaway
CONSTRUCTION AND BUILDING MATERIALS (2010)
Experimental Investigation of the Influence of Moisture on the Bond Behavior of FRP to Concrete Interfaces
Jian-Guo Dai et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2010)
Wet Lay-Up Manufactured FRPs for Concrete and Masonry Repair: Influence of Water on the Properties of Composites and on Their Epoxy Components
Margherita Stefania Sciolti et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2010)
Durability study of neat/nanophased GFRP composites subjected to different environmental conditioning
S. Zainuddin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Procedures conditioning the absorption/desorption behavior of cold-cured epoxy resins
Mariaenrica Frigione et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2008)
Water effects on the bond strength of concrete/concrete adhesive joints
M. Frigione et al.
CONSTRUCTION AND BUILDING MATERIALS (2006)
Environmental effects on epoxy adhesives employed for restoration of historical buildings
M. Frigione et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2006)
Cure kinetics and properties of epoxy resins containing a phosphorous-based flame retardant
M Frigione et al.
ADVANCES IN POLYMER TECHNOLOGY (2003)
Field exposure based durability assessment of FRP column wrap systems
JS Zhang et al.
COMPOSITES PART B-ENGINEERING (2003)
Fiber-reinforced polymer composites for construction-state-of-the-art review
CE Bakis et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2002)
Effects of environmental conditions on performance of polymeric adhesives for restoration of concrete structures
MA Aiello et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2002)
Cold-curing epoxy resins: Aging and environmental effects. I - Thermal properties
M Frigione et al.
JOURNAL OF POLYMER ENGINEERING (2001)
Share Paper
