Related references
Note: Only part of the references are listed.Direct observation of precipitation along twin boundaries and dissolution in a magnesium alloy annealing at high temperature
Dikai Guan et al.
SCRIPTA MATERIALIA (2017)
Strengthening strategy for a ductile metastable β-titanium alloy using low-temperature aging
F. Sun et al.
MATERIALS RESEARCH LETTERS (2017)
Elastically confined martensitic transformation at the nano-scale in a multifunctional titanium alloy
H. L. Wang et al.
ACTA MATERIALIA (2017)
In situ scanning and transmission electron microscopy investigation on plastic deformation in a metastable β titanium alloy
Tingting Yao et al.
ACTA MATERIALIA (2017)
Corrosion-wear of β-Ti alloy TMZF (Ti-12Mo-6Zr-2Fe) in simulated body fluid
Xueyuan Yang et al.
ACTA BIOMATERIALIA (2016)
The indirect influence of the ω phase on the degree of refinement of distributions of the α phase in metastable β-Titanium alloys
Yufeng Zheng et al.
ACTA MATERIALIA (2016)
Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy
Mansur Ahmed et al.
ACTA MATERIALIA (2016)
Superelasticity and Tunable Thermal Expansion across a Wide Temperature Range
Y. L. Hao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
A β-titanium alloy with extra high strain-hardening rate: Design and mechanical properties
C. Brozek et al.
SCRIPTA MATERIALIA (2016)
Formation of equiaxed α during ageing in a severely deformed metastable β Ti alloy
A. Zafari et al.
SCRIPTA MATERIALIA (2016)
A low-cost hierarchical nanostructured beta-titanium alloy with high strength
Arun Devaraj et al.
NATURE COMMUNICATIONS (2016)
The effect of grain size on the twin initiation stress in a TWIP steel
K. M. Rahman et al.
ACTA MATERIALIA (2015)
Deformation mechanism of ω-enriched Ti-Nb-based gum metal: Dislocation channeling and deformation induced ω-β transformation
M. J. Lai et al.
ACTA MATERIALIA (2015)
Influence of phase transformation kinetics on the formation of α in a β-quenched Ti-5A1-5Mo-5V-3Cr-1Zr alloy
Pere Barriobero-Vila et al.
ACTA MATERIALIA (2015)
The influence of β phase stability on deformation mode and compressive mechanical properties of Ti-10V-3Fe-3Al alloy
Mansur Ahmed et al.
ACTA MATERIALIA (2015)
Formation of nanocrystalline β structure in metastable beta Ti alloy during high pressure torsion: The role played by stress induced martensitic transformation
A. Zafari et al.
ACTA MATERIALIA (2015)
A new titanium alloy with a combination of high strength, high strain hardening and improved ductility
F. Sun et al.
SCRIPTA MATERIALIA (2015)
Changeable Young's modulus with large elongation-to-failure in β-type titanium alloys for spinal fixation applications
Huihong Liu et al.
SCRIPTA MATERIALIA (2014)
Perspectives on Titanium Science and Technology
Dipankar Banerjee et al.
ACTA MATERIALIA (2013)
Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects
F. Sun et al.
ACTA MATERIALIA (2013)
Microstructure evolution and mechanical properties of a Ti-35Nb-3Zr-2Ta biomedical alloy processed by equal channel angular pressing (ECAP)
Zhengjie Lin et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Grain size effect on deformation twinning propensity in ultrafine-grained hexagonal close-packed titanium
J. L. Sun et al.
SCRIPTA MATERIALIA (2013)
Promoting nano/ultrafine-duplex structure via accelerated α precipitation in a β-type titanium alloy severely deformed by high-pressure torsion
W. Xu et al.
SCRIPTA MATERIALIA (2013)
Microstructure and mechanical behavior of a Ti-24Nb-4Zr-8Sn alloy processed by warm swaging and warm rolling
Y. L. Hao et al.
ACTA MATERIALIA (2012)
On the formation of an ultrafine-duplex structure facilitated by severe shear deformation in a Ti-20Mo β-type titanium alloy
W. Xu et al.
ACTA MATERIALIA (2012)
Heterogeneous twin formation and its effect on tensile properties in Ti-Mo based β titanium alloys
X. H. Min et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Grain size effect on strain hardening in twinning-induced plasticity steels
I. Gutierrez-Urrutia et al.
SCRIPTA MATERIALIA (2012)
Effect of grain size on tensile properties of fine-grained metastable β titanium alloys fabricated by stress-induced martensite and its reverse transformations
Ming-Hui Cai et al.
SCRIPTA MATERIALIA (2012)
On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects
Matthieu Marteleur et al.
SCRIPTA MATERIALIA (2012)
Mechanisms of deformation in gum metal TNTZ-O and TNTZ titanium alloys: A comparative study on the oxygen influence
M. Besse et al.
ACTA MATERIALIA (2011)
Enhancement of uniform elongation in high strength Ti-Mo based alloys by combination of deformation modes
X. H. Min et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Strong crystal size effect on deformation twinning
Qian Yu et al.
NATURE (2010)
The effect of grain size and grain orientation on deformation twinning in a Fe-22 wt.% Mn-0.6 wt.% C TWIP steel
I. Gutierrez-Urrutia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Prediction of the martensite start temperature for β titanium alloys as a function of composition
Suresh Neelakantan et al.
SCRIPTA MATERIALIA (2009)
Formation of an ultrafine-grained structure during equal-channel angular pressing of a beta-titanium alloy with low phase stability
W. Xu et al.
SCRIPTA MATERIALIA (2009)
Thermomechanical processing of Ti-5A1-5Mo-5V-3Cr
N. G. Jones et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels
O. Bouaziz et al.
SCRIPTA MATERIALIA (2008)
Theory-guided bottom-up design of β-titanium alloys as biomaterials based on first principles calculations:: Theory and experiments
D. Raabe et al.
ACTA MATERIALIA (2007)
Elastic deformation behaviour of Ti-24Nb-4Zr-7.9Sn for biomedical applications
Y. L. Hao et al.
ACTA BIOMATERIALIA (2007)
Phase stability and its effect on the deformation behavior of Ti-Nb-Ta-In/Cr β alloys
W Xu et al.
SCRIPTA MATERIALIA (2006)
Microstructural modification in a beta titanium alloy for implant applications
T Zhou et al.
MATERIALS TRANSACTIONS (2006)
General approach to phase stability and elastic properties of beta-type Ti-alloys using electronic parameters
Mohamed Abdel-Hady et al.
SCRIPTA MATERIALIA (2006)
Effect of βgrain size on stress induced martensitic transformation in βsolution treated Ti-10V-2Fe-W alloy
A Bhattacharjee et al.
SCRIPTA MATERIALIA (2005)
The microstructural evolution of near beta alloy Ti-10V-2Fe-3Al during subtransus forging
M Jackson et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Pseudo-elastic deformation behavior in a Ti/Mo-based alloy
T Zhou et al.
SCRIPTA MATERIALIA (2004)
Optimization of strength and ductility in nanocrystalline and ultrafine grained metals
CC Koch
SCRIPTA MATERIALIA (2003)
Precipitation and recrystallization behavior of beta titanium alloys during continuous heat treatment
OM Ivasishin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)
High tensile ductility in a nanostructured metal
YM Wang et al.
NATURE (2002)
Stabilization mechanisms of retained austenite in transformation-induced plasticity steel
JJ Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Deformation induced martensite and superelasticity in a β-metastable titanium alloy
T Grosdidier et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Effect of microstructure variations on the formation of deformation-induced martensite and associated tensile properties in a β metastable Ti alloy
T Grosdidier et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)