Related references
Note: Only part of the references are listed.Iterative feedback bio-printing-derived cell-laden hydrogel scaffolds with optimal geometrical fidelity and cellular controllability
Ling Wang et al.
SCIENTIFIC REPORTS (2018)
Assessing bioink shape fidelity to aid material development in 3D bioprinting
A. Ribeiro et al.
BIOFABRICATION (2018)
Three-dimensional plotting of a cell-laden alginate/methylcellulose blend: towards biofabrication of tissue engineering constructs with clinically relevant dimensions
Kathleen Schuetz et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2017)
Sodium alginate/carboxymethyl cellulose films containing pyrogallic acid: physical and antibacterial properties
Yingying Han et al.
JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE (2017)
Precise stacking of decellularized extracellular matrix based 3D cell-laden constructs by a 3D cell printing system equipped with heating modules
Geunseon Ahn et al.
SCIENTIFIC REPORTS (2017)
Support grain architecture design for additive manufacturing
Md Ahasan Habib et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Crimped fiber with controllable patterns fabricated via electrohydrodynamic jet printing
Yang Wu et al.
MATERIALS & DESIGN (2017)
Influence of electrohydrodynamic jetting parameters on the morphology of PCL scaffolds
Hang Liu et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2017)
Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability
Naomi Paxton et al.
BIOFABRICATION (2017)
Development of a clay based bioink for 3D cell printing for skeletal application
T. Ahlfeld et al.
BIOFABRICATION (2017)
3D Bioprinting of Highly Thixotropic Alginate/Methylcellulose Hydrogel with Strong Interface Bonding
Huijun Li et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Comparison of biomaterial-dependent and -independent bioprinting methods for cardiovascular medicine
Leni Moldovan et al.
CURRENT OPINION IN BIOMEDICAL ENGINEERING (2017)
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Wei Zhu et al.
BIOMATERIALS (2017)
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Weitao Jia et al.
BIOMATERIALS (2016)
Role of pore size and morphology in musculo-skeletal tissue regeneration
Roman A. Perez et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Hyun-Wook Kang et al.
NATURE BIOTECHNOLOGY (2016)
Gelatin Scaffolds with Controlled Pore Structure and Mechanical Property for Cartilage Tissue Engineering
Shangwu Chen et al.
TISSUE ENGINEERING PART C-METHODS (2016)
Biofabrication of 3D Alginate-Based Hydrogel for Cancer Research: Comparison of Cell Spreading, Viability, and Adhesion Characteristics of Colorectal HCT116 Tumor Cells
Jelena Ivanovska et al.
TISSUE ENGINEERING PART C-METHODS (2016)
3D Printing of Porous Cell-Laden Hydrogel Constructs for Potential Applications in Cartilage Tissue Engineering
Fu You et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D-Bioprinting of Polylactic Acid (PLA) Nanofiber-Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells
Lokesh Karthik Narayanan et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printing of Porous Cell-Laden Hydrogel Constructs for Potential Applications in Cartilage Tissue Engineering
Fu You et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D-Bioprinting of Polylactic Acid (PLA) Nanofiber-Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells
Lokesh Karthik Narayanan et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Research on the printability of hydrogels in 3D bioprinting
Yong He et al.
SCIENTIFIC REPORTS (2016)
Investigation of process parameters of electrohydro-dynamic jetting for 3D printed PCL fibrous scaffolds with complex geometries
Hui Wang et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2016)
Rheological study on 3D printability of alginate hydrogel and effect of graphene oxide
Huijun Li et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2016)
Electrohydrodynamic printing: a potential tool for high-resolution hydrogel/cell patterning
Xiang Zhao et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Applications of Alginate-Based Bioinks in 3D Bioprinting
Eneko Axpe et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2016)
Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells
Liliang Ouyang et al.
BIOFABRICATION (2016)
Bioink properties before, during and after 3D bioprinting
Katja Hoelzl et al.
BIOFABRICATION (2016)
Calcium alginate-carboxymethyl cellulose beads for colon-targeted drug delivery
Tarun Agarwal et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2015)
Design Framework for Multifunctional Additive Manufacturing: Placement and Routing of Three-Dimensional Printed Circuit Volumes
A. Panesar et al.
JOURNAL OF MECHANICAL DESIGN (2015)
Biomaterials for Integration with 3-D Bioprinting
Aleksander Skardal et al.
ANNALS OF BIOMEDICAL ENGINEERING (2015)
An additive manufacturing-based PCL-alginate-chondrocyte bioprinted scaffold for cartilage tissue engineering
Joydip Kundu et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2015)
Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting
Silke Wuest et al.
ACTA BIOMATERIALIA (2014)
Engineering a morphogenetically active hydrogel for bioprinting of bioartificial tissue derived from human osteoblast-like SaOS-2 cells
Meik Neufurth et al.
BIOMATERIALS (2014)
Natural polymers for the microencapsulation of cells
Luca Gasperini et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Biofabrication: an overview of the approaches used for printing of living cells
Cameron J. Ferris et al.
APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2013)
Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology
Tao Xu et al.
BIOMATERIALS (2013)
Evaluation of hydrogels for bio-printing applications
Sean V. Murphy et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Calcium-Alginate Hydrogel-Encapsulated Fibroblasts Provide Sustained Release of Vascular Endothelial Growth Factor
Nicola C. Hunt et al.
TISSUE ENGINEERING PART A (2013)
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Qiu Li Loh et al.
TISSUE ENGINEERING PART B-REVIEWS (2013)
Biofabrication Under Fluorocarbon: A Novel Freeform Fabrication Technique to Generate High Aspect Ratio Tissue-Engineered Constructs
Andreas Blaeser et al.
BIORESEARCH OPEN ACCESS (2013)
Ionically crosslinked alginate-carboxymethyl cellulose beads for the delivery of protein therapeutics
Min Sup Kim et al.
APPLIED SURFACE SCIENCE (2012)
Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
Roberto Gaetani et al.
BIOMATERIALS (2012)
The promotion of in vitro vessel-like organization of endothelial cells in magnetically responsive alginate scaffolds
Yulia Sapir et al.
BIOMATERIALS (2012)
Porous scaffold architecture guides tissue formation
Amaia Cipitria et al.
JOURNAL OF BONE AND MINERAL RESEARCH (2012)
Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system
Jin-Hyung Shim et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)
THREE-DIMENSIONAL PRINTERS ARE OPENING UP NEW WORLDS TO RESEARCH.
Nicola Jones
NATURE (2012)
Food Layered Manufacture: A new process for constructing solid foods
Teresa F. Wegrzyn et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2012)
Effect of carboxymethyl cellulose concentration on physical properties of biodegradable cassava starch-based films
Wirongrong Tongdeesoontorn et al.
CHEMISTRY CENTRAL JOURNAL (2011)
Direct-write bioprinting three-dimensional biohybrid systems for future regenerative therapies
Carlos C. Chang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2011)
A functionally gradient variational porosity architecture for hollowed scaffolds fabrication
A. K. M. Khoda et al.
BIOFABRICATION (2011)
High-throughput laser printing of cells and biomaterials for tissue engineering
F. Guillemot et al.
ACTA BIOMATERIALIA (2010)
Encapsulation of fibroblasts causes accelerated alginate hydrogel degradation
N. C. Hunt et al.
ACTA BIOMATERIALIA (2010)
Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates
Aleksander Skardal et al.
BIOMATERIALS (2010)
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Bertrand Guillotin et al.
BIOMATERIALS (2010)
The effect of mean pore size on cell attachment, proliferation and migration in collagen-glycosaminoglycan scaffolds for bone tissue engineering
Ciaral M. Murphy et al.
BIOMATERIALS (2010)
Bio rapid prototyping by extruding/aspirating/refilling thermoreversible hydrogel
K. Iwami et al.
BIOFABRICATION (2010)
Effect of pore size on ECM secretion and cell growth in gelatin scaffold for articular cartilage tissue engineering
Sio-Mei Lien et al.
ACTA BIOMATERIALIA (2009)
Cell proliferation and migration in silk fibroin 3D scaffolds
Biman B. Mandal et al.
BIOMATERIALS (2009)
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Saif Khalil et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2009)
Precision extruding deposition (PED) fabrication of polycaprolactone (PCL) scaffolds for bone tissue engineering
Lauren Shor et al.
BIOFABRICATION (2009)
A review of rapid prototyping techniques for tissue engineering purposes
Sanna M. Peltola et al.
ANNALS OF MEDICINE (2008)
Small functional groups for controlled differentiation of hydrogel-encapsulated human mesenchymal stem cells
Danielle S. W. Benoit et al.
NATURE MATERIALS (2008)
Hydrogels as extracellular matrices for skeletal tissue engineering: state-of-the-art and novel application in organ printing
Natalja E. Fedorovich et al.
TISSUE ENGINEERING (2007)
Carboxymethylcellulose binds to human corneal epithelial cells and is a modulator of corneal epithelial wound healing
Qian Garrett et al.
INVESTIGATIVE OPHTHALMOLOGY & VISUAL SCIENCE (2007)
Mesenchymal stem cell ingrowth and differentiation on coralline hydroxyapatite scaffolds
Tina Mygind et al.
BIOMATERIALS (2007)
Electrospinning of polymeric nanofibers for tissue engineering applications: A review
Quynh P. Pham et al.
TISSUE ENGINEERING (2006)
Inkjet printing of viable mammalian cells
T Xu et al.
BIOMATERIALS (2005)
Rapid prototyping in tissue engineering: challenges and potential
WY Yeong et al.
TRENDS IN BIOTECHNOLOGY (2004)
Biological laser printing: A novel technique for creating heterogeneous 3-dimensional cell patterns
JA Barron et al.
BIOMEDICAL MICRODEVICES (2004)
Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs
KF Leong et al.
BIOMATERIALS (2003)
A novel use of alginate hydrogel as Schwann cell matrix
A Mosahebi et al.
TISSUE ENGINEERING (2001)
Share Paper
