4.8 Article

Unraveling the catalyzing behaviors of different iron species (Fe2+ vs. Fe) in activating persulfate-based oxidation process with implications to waste activated sludge dewaterability

Journal

WATER RESEARCH
Volume 134, Issue -, Pages 101-114

Publisher

PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.watres.2018.01.072

Keywords

Waste activated sludge; Dewatering; Persulfate-based oxidation process; Iron catalysts; Extracellular polymeric substances

Funding

  1. Science & Technology Innovation Action Plan of Shanghai under the Belt and Road Initiative [17230741100]
  2. Distinguished Professor in Universities of Shanghai (Oriental Scholar)
  3. Shanghai Pujiang Program [17111402100]
  4. Fundamental Research Funds for the Central Universities [40500-20101-222001]
  5. Japan Society for the Promotion of Science [PU 14016, P 16352]
  6. Central Public-interest Scientific Institution Basal Research Fund [20160301]
  7. National Natural Science Foundation of China [51678459]

Ask authors/readers for more resources

Dewatering of waste'activated sludge (WAS) is of major interest in its volume reduction, transportation and ultimate disposal. Persulfate-based oxidation process is a newly developed option for enhancing WAS dewaterability through the generation of powerful sulfate radicals (SO4-). However, the enhancement in WAS dewaterability by persulfate differs with the species of iron catalysts used. In this study, two types of iron catalysts (i.e. Fe2+ vs. Fe) were employed to initiate the persulfate (S2O82-), and the catalyzing behaviors and the underlying principles in enhancing WAS dewaterability were investigated and compared. The Fe2+ exhibited the high effectiveness in catalyzing the decomposition of persulfate to sulfate radicals (SO4-), inducing the greater improvement in WAS dewatering. The WAS dewaterability (indicated by dry solids content after filtration) increased with the added S2O82-/Fe2+ dosages, with the dry solids content reaching up to 5.1 0.8 wt% at S2O82-/Fe2+ dosages of 1.2/1.5 mmol/g-VS after only 30 s' filtration, roughly 1.8-fold increase than raw WAS (1.8 +/- 0.1 wt%). In contrast, the influence of the persulfate oxidation when activated with Fe on WAS dewaterability was statistically insignificant. The WAS dewaterability remained nearly unchanged (i.e. dry solids content of 2.0 +/- 0.0 wt %), irrespective of the employed S2O82-/Fe-0 dosages. Further analysis demonstrated that the WAS dewaterability negatively corresponded to loosely bound extracellular polymeric substances (LB-EPS) and tightly bound EPS (TB-EPS). The abundant SO4- from S2O82-/Fe2+ system could effectively disrupt the gel like EPS matrix, break apart the cells and subsequently arouse the release of the water inside EPS and cells, facilitating water-solid separation. In the case of S2O82-/Fe-0, the dissolution of Fe particles was the rate-limiting step, due to the formation of oxide iron layer near Fe metallic surface, which resulted in the slow SO4 production and thus hardly promoted WAS dewaterability. The pH adjustment could accelerate Fe dissolution and enhance the dewatering performance of S2O82-/Fe-0 process to a certain degree, but the effect was unsatisfactory. Additionally, the observations regarding the dissolved organic matters and ammonium collectively revealed that except for enhancing WAS dewatering, S2O82-/Fe2+ oxidation could concurrently degrade COD and ammonia from WAS filtrate, lighten the burden of the subsequent sewage treatment facilities and reduce operational expense. Hence, from an environmental and economic perspective, the S2O82/Fe2+ system possesses much greater promise for WAS dewatering. (C) 2018 Elsevier Ltd. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.8
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available