Screw pyrolysis technology for sewage sludge treatment

Sewage sludge quantities have grown continuously since the introduction of the European Directive (UWWTD 91/271/EEC) relating to the treatment of urban wastewater. In the present, most of the sewage sludge is combusted in single fuels incineration plants or is co-fired in waste incineration or coal power plants. The combustion of sewage sludge is a proven technology. Other treatments, such as fluidized bed gasification, were successfully adopted to produce suitable syngas for power production. Besides, the number of large wastewater treatment plants is relatively small compared to the local rural ones. Moreover, alternative technologies are arising with the main target of nutrients recovery, with a special focus on phosphorus. The aforementioned issues, i.e. the small scale (below 1 MW) and the nutrients recovery, suggest that pyrolysis in screw reactors may become an attractive alternative technology for sewage sludge conversion, recovery and recycling. In this work, about 100 kg of dried sewage sludge from a plant in Germany were processed at the newly developed STYX Reactor, at KIT. The reactor combines the advantages of screw reactors with the high temperature filtration, in order to produce particle and ash free vapors and condensates, respectively. Experiments were carried out at temperatures between 350 degrees C and 500 degrees C. The yield of the char decreased from 66.7 wt.% to 53.0 wt.%. The same trend was obtained for the energy yield, while the maximum pyrolysis oil yield of 13.4 wt.% was obtained at 500 degrees C. Besides mercury, the metals and the other minerals were completely retained in the char. Nitrogen and sulfur migrated from the solid to the condensate and to the gas, respectively. Based on the energy balance, a new concept for the decentral production of char as well as heat and power in an externally fired micro gas turbine showed a cogeneration efficiency up to about 40%. (C) 2017 Elsevier Ltd. All rights reserved.