Intensification of heat transfer during mild thermal treatment of dry-cured ham by using airborne ultrasound

The application of power ultrasound (PuS) could be used as a novel technology with which to intensify thermal treatments using hot air. Mild thermal treatments have been applied to improve the soft texture of dry-cured ham caused by defective processing. In this regard, the aim of this study was to assess the kinetic intensification linked to the application of airborne PuS in the mild thermal treatment using hot air of dry-cured ham. For this purpose, vacuum packed cylindrical samples (2.52 +/- 0.11 cm in diameter and 1.90 +/- 0.14 cm in height) of dry-cured ham were heated using hot air at different temperatures (40, 45, 50 degrees C) and air velocities (1, 2, 3, 4, 6 m/s) with (22.3 kHz, 50 W) and without PuS application. Heat transfer was analyzed by considering that it was entirely controlled by conduction and the apparent thermal diffusivity was identified by fitting the model to the heating kinetics. The obtained results revealed that PuS application sped up the heat transfer, showing an increase in the apparent thermal diffusivity (up to 37%). The improvement in the apparent thermal diffusivity produced by PuS application was greater at high temperatures (50 degrees C) but negligible at high air velocities (6 m/s). Heating caused an increase in the hardness and elasticity of dry-cured ham, which would correct ham pastiness defects, while the influence of PuS on such textural parameters Was negligible.