Related references
Note: Only part of the references are listed.Imaging of barely visible impact damage on a composite panel using nonlinear wave modulation thermography
Dimitrios Dionysopoulos et al.
NDT & E INTERNATIONAL (2018)
Machine Learning and Infrared Thermography for Fiber Orientation Assessment on Randomly-Oriented Strands Parts
Henrique Fernandes et al.
SENSORS (2018)
Optimizing the Inversion Protocol to Determine the Geometry of Vertical Cracks from Lock-in Vibrothermography
A. Castelo et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2017)
Application of lock-in thermography for the inspection of disbonds in titanium alloy honeycomb sandwich structure
Hanxue Zhao et al.
INFRARED PHYSICS & TECHNOLOGY (2017)
Optimization of the Inspection of Large Composite Materials Using Robotized Line Scan Thermography
Fariba Khodayar et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2017)
Imaging of Barely Visible Impact Damage on a Complex Composite Stiffened Panel Using a Nonlinear Ultrasound Stimulated Thermography Approach
Gian Piero Malfense Fierro et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2017)
Nonlinear ultrasonic stimulated thermography for damage assessment in isotropic fatigued structures
Gian Piero Malfense Fierro et al.
JOURNAL OF SOUND AND VIBRATION (2017)
On the generation of nonlinear damage resonance intermodulation for elastic wave spectroscopy
Francesco Ciampa et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2017)
Impact damaging of composites through online monitoring and non-destructive evaluation with infrared thermography
C. Meola et al.
NDT & E INTERNATIONAL (2017)
Fourier-transform vibrothermography with frequency sweep excitation utilizing local defect resonances
Markus Rahammer et al.
NDT & E INTERNATIONAL (2017)
Time and frequency behaviour in TSR and PPT evaluation for flash thermography
Beate Oswald-Tranta
QUANTITATIVE INFRARED THERMOGRAPHY JOURNAL (2017)
Time and frequency behaviour in TSR and PPT evaluation for flash thermography
Beate Oswald-Tranta
QUANTITATIVE INFRARED THERMOGRAPHY JOURNAL (2017)
Capacitive imaging of impact damage in composite material
Maxim Morozov et al.
COMPOSITES PART B-ENGINEERING (2017)
Experimental study on debonding defects detection in thermal barrier coating structure using infrared lock-in thermographic technique
Qingju Tang et al.
APPLIED THERMAL ENGINEERING (2016)
Polymer-matrix composites carbon fibre characterisation and damage inspection using selectively heating thermography (SeHT) through electromagnetic induction
Ruizhen Yang et al.
COMPOSITE STRUCTURES (2016)
Inverse methodology for identification the thermal diffusivity and subsurface defect of CFRP composite by lock-in thermographic phase (LITP) profile reconstruction
Liu Junyan et al.
COMPOSITE STRUCTURES (2016)
Low energy impact damage detection in CFRP using eddy current pulsed thermography
Tao Liang et al.
COMPOSITE STRUCTURES (2016)
An Analytical Model for Defect Depth Estimation Using Pulsed Thermography
S. L. Angioni et al.
EXPERIMENTAL MECHANICS (2016)
Quantitative detection of defects based on Markov-PCA-BP algorithm using pulsed infrared thermography technology
Tang Qingju et al.
INFRARED PHYSICS & TECHNOLOGY (2016)
Low-velocity impact damage characterization of carbon fiber reinforced polymer (CFRP) using infrared thermography
Yin Li et al.
INFRARED PHYSICS & TECHNOLOGY (2016)
Optically and non-optically excited thermography for composites: A review
Ruizhen Yang et al.
INFRARED PHYSICS & TECHNOLOGY (2016)
Applying the heat conduction-based 3D normalization and thermal tomography to pulsed infrared thermography for defect characterization in composite materials
S. S. Pawar et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Quantification of defects depth in glass fiber reinforced plastic plate by infrared lock-in thermography
Shrestha Ranjit et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Thermosonic Testing with Phase Matched Guided Wave Excitation
Markus Rahammer et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2016)
Noncontact Sonic NDE and Defect Imaging Via Local Defect Resonance
Igor Solodov et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2016)
Thermal (IR) and Other NDT Techniques for Improved Material Inspection
D. Balageas et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2016)
Non-destructive testing of CFRP using pulsed thermography and multi-dimensional ensemble empirical mode decomposition
Yu-Sung Chang et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2016)
A coefficient clustering analysis for damage assessment of composites based on pulsed thermographic inspection
Yifan Zhao et al.
NDT & E INTERNATIONAL (2016)
Pulsed phase thermography imaging of fatigue-loaded composite adhesively bonded joints
Peter H. Shin et al.
NDT & E INTERNATIONAL (2016)
Investigation on the damage evolution in the impacted composite material based on active infrared thermography
Yin Li et al.
NDT & E INTERNATIONAL (2016)
Ultrasonic Infrared Thermography in Non-Destructive Testing: A Review
M. Z. Umar et al.
RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING (2016)
Detection of multiple thin surface cracks using vibrothermography with low-power piezoceramic-based ultrasonic actuator-a numerical study with experimental verification
Seyed Mohammad Parvasi et al.
SMART MATERIALS AND STRUCTURES (2016)
Pulsed micro-laser line thermography on submillimeter porosity in carbon fiber reinforced polymer composites: experimental and numerical analyses for the capability of detection
Hai Zhang et al.
APPLIED OPTICS (2016)
Eddy current pulsed phase thermography considering volumetric induction heating for delamination evaluation in carbon fiber reinforced polymers
Ruizhen Yang et al.
APPLIED PHYSICS LETTERS (2015)
Pulse Compression Approach to Nonstationary Infrared Thermal Wave Imaging for Nondestructive Testing of Carbon Fiber Reinforced Polymers
Vanita Arora et al.
IEEE SENSORS JOURNAL (2015)
Eddy Current Volume Heating Thermography and Phase Analysis for Imaging Characterization of Interface Delamination in CFRP
Yunze He et al.
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2015)
Study on probability of detection (POD) determination using lock-in thermography for nondestructive inspection (NDI) of CFRP composite materials
Liu Junyan et al.
INFRARED PHYSICS & TECHNOLOGY (2015)
Review of pulsed thermal NDT: Physical principles, theory and data processing
Vladimir P. Vavilov et al.
NDT & E INTERNATIONAL (2015)
Gapped smoothing algorithm applied to defect identification using pulsed thermography
Bing Li et al.
NONDESTRUCTIVE TESTING AND EVALUATION (2015)
A novel approach for one-sided thermal nondestructive testing of composites by using infrared thermography
V. P. Vavilov et al.
POLYMER TESTING (2015)
Pulsed thermographic evaluation of disbonds in the insulation of solid rocket motors made of elastomers
Xingwang Guo et al.
POLYMER TESTING (2015)
Common tools for quantitative pulse and step-heating thermography - part II: experimental investigation
Jean-Michel Roche et al.
QUANTITATIVE INFRARED THERMOGRAPHY JOURNAL (2015)
Ultrasonic and optical stimulation in IR thermographic NDT of impact damage in carbon composites
Vladimir Vavilov et al.
QUANTITATIVE INFRARED THERMOGRAPHY JOURNAL (2015)
Common tools for quantitative pulse and step-heating thermography - part II: experimental investigation
Jean-Michel Roche et al.
QUANTITATIVE INFRARED THERMOGRAPHY JOURNAL (2015)
Ultrasonic and optical stimulation in IR thermographic NDT of impact damage in carbon composites
Vladimir Vavilov et al.
QUANTITATIVE INFRARED THERMOGRAPHY JOURNAL (2015)
Quantitative damage evaluation of composite materials with microwave thermographic technique: feasibility and new data analysis
Davide Palumbo et al.
MECCANICA (2015)
Infrared thermography and ultrasonics to evaluate composite materials for aeronautical applications
S. Boccardi et al.
XXII AIVELA ANNUAL MEETING (2015)
On the evaluation of impact damage on composite materials by comparing different NDI techniques
P. Gaudenzi et al.
COMPOSITE STRUCTURES (2014)
Impact evaluation in carbon fiber reinforced plastic (CFRP) laminates using eddy current pulsed thermography
Yunze He et al.
COMPOSITE STRUCTURES (2014)
A compact thermosonic inspection system for the inspection of composites
U. Polimeno et al.
COMPOSITES PART B-ENGINEERING (2014)
Mechanical damage assessment of Polymer-Matrix Composites using active infrared thermography
W. Harizi et al.
COMPOSITES PART B-ENGINEERING (2014)
Application of infrared thermography for the characterization of damage in braided carbon fiber reinforced polymer matrix composites
John Montesano et al.
COMPOSITES PART B-ENGINEERING (2014)
Infrared Lock-in Thermography Crack Localization on Metallic Surfaces for Industrial Diagnosis
Y. Fedala et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2014)
Current injection phase thermography for low-velocity impact damage identification in composite laminates
S. A. Grammatikos et al.
MATERIALS & DESIGN (2014)
Optimization of pulsed thermography inspection by partial least-squares regression
Fernando Lopez et al.
NDT & E INTERNATIONAL (2014)
Material enabled thermography
E. Pinto et al.
NDT & E INTERNATIONAL (2014)
Modeling 3D heat flow interaction with defects in composite materials for infrared thermography
Arun Manohar et al.
NDT & E INTERNATIONAL (2014)
Detecting cracks in aircraft engine fan blades using vibrothermography nondestructive evaluation
Chunwang Gao et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2014)
Common tools for quantitative time-resolved pulse and step-heating thermography - part I: theoretical basis
Daniel L. Balageas et al.
QUANTITATIVE INFRARED THERMOGRAPHY JOURNAL (2014)
Use of infrared thermography to investigate the fatigue behavior of a carbon fiber reinforced polymer composite
John Montesano et al.
COMPOSITE STRUCTURES (2013)
Experimental study on active infrared thermography as a NDI tool for carbon-carbon composites
Liu Junyan et al.
COMPOSITES PART B-ENGINEERING (2013)
Quantitative non-destructive evaluation method for impact damage using eddy current pulsed thermography
Wenwei Ren et al.
COMPOSITES PART B-ENGINEERING (2013)
Transient Thermal Behavior of Eddy-Current Pulsed Thermography for Nondestructive Evaluation of Composites
Liang Cheng et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2013)
Detecting deeper defects using pulse phase thermography
Masashi Ishikawa et al.
INFRARED PHYSICS & TECHNOLOGY (2013)
Defect detection and evaluation of ultrasonic infrared thermography for aerospace CFRP composites
Bo Yang et al.
INFRARED PHYSICS & TECHNOLOGY (2013)
Quantitative evaluation of optical lock-in and pulsed thermography for aluminum foam material
Yuxia Duan et al.
INFRARED PHYSICS & TECHNOLOGY (2013)
FEM modeling of ultrasonic vibrothermography of a damaged plate and qualitative study of heating mechanisms
A. Saboktakin Rizi et al.
INFRARED PHYSICS & TECHNOLOGY (2013)
Crack detection in aluminum parts by using ultrasound-excited infrared thermography
Xingwang Guo et al.
INFRARED PHYSICS & TECHNOLOGY (2013)
Physical interpretation and separation of eddy current pulsed thermography
Aijun Yin et al.
JOURNAL OF APPLIED PHYSICS (2013)
Resonant ultrasound spectroscopy of defects: Case study of flat-bottomed holes
Igor Solodov et al.
JOURNAL OF APPLIED PHYSICS (2013)
Rapid evaluation of the fatigue limit in composites using infrared lock-in thermography and acoustic emission
E. Z. Kordatos et al.
MECHANICS RESEARCH COMMUNICATIONS (2013)
Modelling and numerical simulations of vibrothermography for impact damage detection in composites structures
L. Pieczonka et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2013)
Non-destructive evaluation of thick glass fiber-reinforced composites by means of optically excited lock-in thermography
Roberto Montanini et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Impact-damage visualization in CFRP by resistive heating: Development of a new detection method for indentations caused by impact loads
Yoshiro Suzuki et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
The study of inspection on SiC coated carbon-carbon composite with subsurface defects by lock-in thermography
Liu Junyan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
An analytical study of the pulsed thermography defect detection limit
D. P. Almond et al.
JOURNAL OF APPLIED PHYSICS (2012)
Shape identification problems on detecting of defects in a solid body using inverse heat conduction approach
Hamid Fazeli et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2012)
A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization
G. De Angelis et al.
NDT & E INTERNATIONAL (2012)
Multifunctional SMArt composite material for in situ NDT/SHM and de-icing
Fulvio Pinto et al.
SMART MATERIALS AND STRUCTURES (2012)
Surface Crack Detection for Carbon Fiber Reinforced Plastic (CFRP) Materials Using Pulsed Eddy Current Thermography
Liang Cheng et al.
IEEE SENSORS JOURNAL (2011)
Sonic IR Imaging of delaminations and disbonds in composites
Xiaoyan Han et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2011)
Multi-physics damage sensing in nano-engineered structural composites
Roberto Guzman de Villoria et al.
NANOTECHNOLOGY (2011)
Thermographic detection of surface breaking defects using a scanning laser source
S. E. Burrows et al.
NDT & E INTERNATIONAL (2011)
A comparison of the pulsed, lock-in and frequency modulated thermography nondestructive evaluation techniques
Krishnendu Chatterjee et al.
NDT & E INTERNATIONAL (2011)
The sources of heat generation in vibrothermography
Jeremy Renshaw et al.
NDT & E INTERNATIONAL (2011)
Crack imaging by scanning pulsed laser spot thermography
Teng Li et al.
NDT & E INTERNATIONAL (2011)
Frequency-modulated thermal wave imaging for non-destructive testing of carbon fiber-reinforced plastic materials
V. S. Ghali et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2011)
Crack imaging by scanning laser-line thermography and laser-spot thermography
T. Li et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2011)
Innovative non-destructive evaluation and damage characterisation of composite aerostructures using thermography
S. A. Grammatikos et al.
PLASTICS RUBBER AND COMPOSITES (2011)
Impact damage resistance and damage suppression properties of shape memory alloys in hybrid composites-a review
S. L. Angioni et al.
SMART MATERIALS AND STRUCTURES (2011)
Detecting delamination zones in composites by embedded electrical grid and thermographic methods
Anita Orlowska et al.
SMART MATERIALS & STRUCTURES (2011)
Impact damage in GFRP New insights with infrared thermography
Carosena Meola et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Interlaminar and intralaminar reinforcement of composite laminates with aligned carbon nanotubes
Sunny S. Wicks et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Quantitative evaluation of angular defects by pulsed eddy current thermography
Ilham Zainal Abidin et al.
NDT & E INTERNATIONAL (2010)
Infrared thermography processing based on higher-order statistics
Francisco J. Madruga et al.
NDT & E INTERNATIONAL (2010)
Modelling and evaluation of eddy current stimulated thermography
John Wilson et al.
NONDESTRUCTIVE TESTING AND EVALUATION (2010)
A calibration procedure for sonic infrared nondestructive evaluation
M. Morbidini et al.
JOURNAL OF APPLIED PHYSICS (2009)
Heat emitting layers for enhancing NDE of composite structures
T. J. Ahmed et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Fabrication and multifunctional properties of a hybrid laminate with aligned carbon nanotubes grown In Situ
Enrique J. Garcia et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Non-destructive inspection of composites using step heating thermography
Adel A. Badghaish et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Matched excitation energy comparison of the pulse and lock-in thermography NDE techniques
Simon Pickering et al.
NDT & E INTERNATIONAL (2008)
Detection of impact damage in CFRP composites by thermosonics
T. J. Barden et al.
NONDESTRUCTIVE TESTING AND EVALUATION (2007)
Theory of frequency modulated thermal wave imaging for nondestructive subsurface defect detection
Ravibabu Mulaveesala et al.
APPLIED PHYSICS LETTERS (2006)
Non-destructive evaluation of aerospace materials with lock-in thermography
C Meola et al.
ENGINEERING FAILURE ANALYSIS (2006)
Fibre reinforced composites in aircraft construction
C Soutis
PROGRESS IN AEROSPACE SCIENCES (2005)
The use of infrared thermography for materials characterization
C Meola et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Transient thermography in the assessment of defects of aircraft composites
NP Avdelidis et al.
NDT & E INTERNATIONAL (2003)
Reconstruction and enhancement of active thermographic image sequences
SM Shepard et al.
OPTICAL ENGINEERING (2003)
Principal component thermography for flaw contrast enhancement and flaw depth characterisation in composite structures
N Rajic
COMPOSITE STRUCTURES (2002)
Rapid thermal non-destructive testing of aircraft components
D Bates et al.
COMPOSITES PART B-ENGINEERING (2000)
Share Paper
