4.7 Article

Pyrolysis of high ash sewage sludge: Kinetics and thermodynamic analysis using Coats-Redfern method

Journal

RENEWABLE ENERGY
Volume 131, Issue -, Pages 854-860

Publisher

PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.renene.2018.07.094

Keywords

Sewage sludge; Pyrolysis; Kinetics; Thermodynamic parameters; Thermogravimetric analysis

Ask authors/readers for more resources

This study aims to investigate the thermo-kinetics of high-ash sewage sludge using thermogravimetric analysis. Sewage sludge was dried, pulverized and heated non-isothermally from 25 to 800 degrees C at different heating rates (5, 10 and 20 C/min) in N-2 atmosphere. TG and DTG results indicate that the sewage sludge pyrolysis may be divided into three stages. Coats-Redfern integral method was applied in the 2nd and 3rd stage to estimate the activation energy and pre-exponential factor from mass loss data using five major reaction mechanisms. The low-temperature stable components (LTSC) of the sewage sludge degraded in the temperature regime of 250-450 degrees C while high-temperature stable components (HTSC) decomposed in the temperature range of 450-700 degrees C. According to the results, first-order reaction model (F1) showed higher Ea with better R-2 for all heating rates. D3, N1, and S1 produced higher Ea at higher heating rates for LTSC pyrolysis and lower Ea with the increase of heating rates for HTSC pyrolysis. All models showed positive Delta H except F1.5. Among all models, Diffusion (D1, D2, D3) and phase interfacial models (S1, S2) showed higher Delta G as compared to reaction, nucleation, and power-law models in section I and section II. (C) 2018 Elsevier Ltd. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available