Comparison of slow and fast pyrolysis for converting biomass into fuel

In this work, the conversion of sugarcane bagasse into fuel was studied as a low cost source material. The conversion was carried out experimentally in a batch pyrolysis reactor. Two pyrolysis methods were compared; namely, fast pyrolysis and slow or conventional pyrolysis. This comparison was based on the thermal decomposition of biomass into fuel and on the product yields. Since the yields are affected by the type of pyrolysis and the operating temperature of the reactor, the comparisons have been conducted at three fixed temperature values of 753, 853 and 953 K. The results revealed that the conventional pyrolysis produce more syngas yield with the increases of temperature. In the case of fast pyrolysis, it was observed that losses and solid yield increase with temperature increase. Moreover, it was found that the highest losses in both cases are less than 15% and that it was higher in conventional pyrolysis. Gases released during the thermal decomposition of biomass were ideDntified as H-2, CO, CO2, CH4 and some light molecular weight of hydrocarbons, such as C2H4 and C2H6. The low temperature was favored for the production of methane other than hydrogen for both processes, while high temperature was favored for the production of hydrogen. The produced H-2 can be used in typical fuel cells. (C) 2017 Elsevier Ltd. All rights reserved.