4.3 Article

Synthesis, characterisation and thermo-physical investigations on magnesia nanoparticles dispersed in ethylene glycol-DI water (50:50)

Journal

MICRO & NANO LETTERS
Volume 13, Issue 3, Pages 335-340

Publisher

INST ENGINEERING TECHNOLOGY-IET
DOI: 10.1049/mnl.2017.0484

Keywords

magnesium compounds; nanoparticles; nanofabrication; combustion synthesis; X-ray diffraction; nanofluidics; Fourier transform infrared spectra; light scattering; electrokinetic effects; viscosity; thermal conductivity; specific heat; thermo-physical investigations; magnesia nanoparticles; ethylene glycol-DI water; solution combustion; X-ray diffraction; scanning electron microscopy; magnesia dispersion; ethylene glycol; deionised water; MgO; temperature 25 degC to 60 degC; specific heat diminution; thermal conductivity; volume concentration; differential scanning calorimeter; KD2 Pro analyser; specific heat; thermal conductivity; rotational viscometer; viscosity; volume concentration; Scherrer relation; crystallite size; average particle size; nanofluid stability; Zeta potential measurement; dynamic light scattering; Fourier transform infrared; measurement

Funding

  1. Department of Science and Technology (DST/SERB) [SB/FTP/ETA-444/2012]

Ask authors/readers for more resources

In the present work, magnesia nanoparticles (17 nm) were synthesised by solution combustion and characterised using X-ray diffraction and scanning electron microscopy. Nanofluid prepared by magnesia dispersion in ethylene glycol and deionised water (50:50) is characterised using Fourier transform infrared, dynamic light scattering (DLS) and Zeta potential measurement. The -41 mV zeta potential confirms nanofluid stability. The average particle size in the nanofluid obtained by the DLS method is 33 nm, whereas the crystallite size is 17 nm as per the Scherrer relation. The nanofluid properties were determined under varying volume concentration (0.025, 0.05, 0.1, 0.2%) and temperature (25-60 degrees C). The viscosity measured by using a rotational viscometer decreases with increase in the temperature, whereas the thermal conductivity and specific heat, measured by using a KD2 Pro analyser and a differential scanning calorimeter, respectively, increases. With the increase in volume concentration, thermal conductivity, and viscosity increases, whereas specific heat decreases. The maximum thermal conductivity enhancement and specific heat diminution was 15.6 and 20.5%, respectively, for 0.2% concentration and the minimum viscosity was 2.2% for 0.025% concentration at 60 degrees C. Based on the measured data, new correlations have been proposed.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.3
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available