Related references
Note: Only part of the references are listed.Calculation of Crystallographic Texture of BCC Steels During Cold Rolling
Arpan Das
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Resurgence of texture in cyclically deformed austenite
Arpan Das
MATERIALS CHARACTERIZATION (2017)
Microstructures and Mechanical Properties of as-Drawn and Laboratory Annealed Pearlitic Steel Wires
A. Durgaprasad et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Grain boundary engineering: fatigue fracture
Arpan Das
PHILOSOPHICAL MAGAZINE (2017)
Defining a relationship between pearlite morphology and ferrite crystallographic orientation
A. Durgaprasad et al.
ACTA MATERIALIA (2017)
Revisiting Stacking Fault Energy of Steels
Arpan Das
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Intervention of martensite variants on the spatial aspect of microvoids
Arpan Das
MATERIALS RESEARCH EXPRESS (2016)
Effects of Al and Mn on the formation and properties of nanostructured pearlite in high-carbon steels
Shuo Liu et al.
MATERIALS & DESIGN (2016)
Mechanisms of subgrain coarsening and its effect on the mechanical properties of carbon-supersaturated nanocrystalline hypereutectoid steel
Y. J. Li et al.
ACTA MATERIALIA (2015)
Effect of V and N on Microstructures and Properties of Grade-70 Tire Cord Steel during Cold Drawing
Hong-yu Liu et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2015)
Microstructure and mechanical properties of cold-drawn pearlitic wires affect by inherited texture
Feng Fang et al.
MATERIALS & DESIGN (2015)
Crystallographic variant selection of martensite at high stress/strain
Arpan Das
PHILOSOPHICAL MAGAZINE (2015)
Crystallographic variant selection of martensite during fatigue deformation
Arpan Das
PHILOSOPHICAL MAGAZINE (2015)
Crystallographic Texture Difference Between Center and Sub-Surface of Thin Cold-Drawn Pearlitic Steel Wires
Tian-Zhang Zhao et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Ductile fracture micro-mechanisms of high strength low alloy steels
Arpan Das et al.
MATERIALS & DESIGN (2014)
The effect of a non-circular drawing sequence on delamination characteristics of pearlitic steel wire
Hyun Moo Baek et al.
MATERIALS & DESIGN (2014)
Texture inheritance of cold drawn pearlite steel wires after austenitization
Feng Fang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Atomic-Scale Quantification of Grain Boundary Segregation in Nanocrystalline Material
M. Herbig et al.
PHYSICAL REVIEW LETTERS (2014)
Segregation Stabilizes Nanocrystalline Bulk Steel with Near Theoretical Strength
Yujiao Li et al.
PHYSICAL REVIEW LETTERS (2014)
Nanocrystalline Fe-C alloys produced by ball milling of iron and graphite
Y. Z. Chen et al.
ACTA MATERIALIA (2013)
Hierarchical structures in cold-drawn pearlitic steel wire
Xiaodan Zhang et al.
ACTA MATERIALIA (2013)
Estimation of damage in high strength steels
Arpan Das et al.
APPLIED SOFT COMPUTING (2013)
Influence of pre-torsion deformation on microstructures and properties of cold drawing pearlitic steel wires
Ning Guo et al.
MATERIALS & DESIGN (2013)
Aging behavior and delamination in cold drawn and post-deformation annealed hyper-eutectoid steel wires
S. W. Joung et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Deformation of dual-structure medium carbon steel in cold drawing
Feng Fang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Defects in Carbon-Rich Ferrite of Cold-Drawn Pearlitic Steel Wires
Y. Z. Chen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
X-ray diffraction and Mossbauer spectroscopy studies of cementite dissolution in cold-drawn pearlitic steel
J. Chakraborty et al.
PHILOSOPHICAL MAGAZINE (2013)
Microstructure and texture evolution in fully pearlitic steel during wire drawing
Guo Ning et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2013)
Atomic scale investigation of redistribution of alloying elements in pearlitic steel wires upon cold-drawing and annealing
Y. J. Li et al.
ULTRAMICROSCOPY (2013)
Change in carbon state by low-temperature aging in heavily drawn pearlitic steel wires
Jun Takahashi et al.
ACTA MATERIALIA (2012)
Evaluation of axial surface residual stress in 0.82-wt% carbon steel wire during multi-pass drawing process considering heat generation
Sang-Kon Lee et al.
MATERIALS & DESIGN (2012)
Atomic-scale mechanisms of deformation-induced cementite decomposition in pearlite
Y. J. Li et al.
ACTA MATERIALIA (2011)
Microstructure and strengthening mechanisms in cold-drawn pearlitic steel wire
Xiaodan Zhang et al.
ACTA MATERIALIA (2011)
Estimation of deformation induced martensite in austenitic stainless steels
Arpan Das et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Analysis of deformation induced martensitic transformation in stainless steels
A. Das et al.
MATERIALS SCIENCE AND TECHNOLOGY (2011)
Mixed diffusion-controlled growth of pearlite in binary steel
A. S. Pandit et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2011)
Diffusion-controlled growth of pearlite in ternary steels
A. S. Pandit et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2011)
Dilatometric analysis of cementite dissolution in hypereutectoid steels containing Cr
Jae-Yong Chae et al.
SCRIPTA MATERIALIA (2011)
Atom probe tomography characterization of heavily cold drawn pearlitic steel wire
Y. J. Li et al.
ULTRAMICROSCOPY (2011)
Fatigue and fracture paths in cold drawn pearlitic steel
J. Toribio et al.
ENGINEERING FRACTURE MECHANICS (2010)
Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials
Dierk Raabe et al.
MRS BULLETIN (2010)
Effect of Aluminum Content on the Microstructure and Mechanical Properties of Hypereutectoid Steels
Yoon Soo Jang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Interlamellar Spacing of Pearlite in a Near-eutectoid Fe-C Alloy Measured by Serial Sectioning
Guohong Zhang et al.
ISIJ INTERNATIONAL (2009)
Pass schedule of wire drawing process to prevent delamination for high strength steel cord wire
S. K. Lee et al.
MATERIALS & DESIGN (2009)
Texture evolution in equal-channel angular extrusion
Irene J. Beyerlein et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Three-dimensional atom probe analysis of heavily drawn steel wires by probing perpendicular to the pearlitic lamellae
Jun Takahashi et al.
ULTRAMICROSCOPY (2009)
The prediction of the occurrence of the delamination in cold drawn hyper-eutectoid steel wires
D. B. Park et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Effect of alloying elements on work hardening behavior in cold drawn hyper-eutectoid steel wires
Hyung Rak Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
The role of carbon segregation on nanocrystallisation of pearlitic steels processed by severe plastic deformation
X. Sauvage et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Effect of additional shear strain layer on tensile strength and microstructure of fine drawn wire
S. Kajino et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Empirical modelling of the isothermal transformation of pearlite in hypereutectoid steel
AM Elwazri et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Residual stresses in cold drawn pearlitic rods
JM Atienza et al.
SCRIPTA MATERIALIA (2005)
Residual stresses in cold drawn ferritic rods
JM Atienza et al.
SCRIPTA MATERIALIA (2005)
Relation of physical-mechanical properties to the structural condition of severely deformed patented carbon steels at drawing
ES Gorkunov et al.
RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING (2005)
Effect of microstructural features on ductility of drawn pearlitic carbon steels
WJ Nam et al.
ISIJ INTERNATIONAL (2005)
Ductility of hypo-eutectoid steels with ferrite-pearlite structures
HJ Sim et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Structure analysis of ferrite in deformed pearlitic steel by means of X-ray diffraction method with synchrotron radiation
A Taniyama et al.
SCRIPTA MATERIALIA (2004)
Influence of residual stresses in the performance of cold-drawn pearlitic wires
M Elices
JOURNAL OF MATERIALS SCIENCE (2004)
Residual stress profiling in the ferrite and cementite phases of cold-drawn steel rods by synchrotron X-ray and neutron diffraction
ML Martinez-Perez et al.
ACTA MATERIALIA (2004)
The mechanism of formation of nanostructure and dissolution of cementite in a pearlitic steel during high pressure torsion
Y Ivanisenko et al.
ACTA MATERIALIA (2003)
Residual stress determination in cold drawn steel wire by FEM simulation and X-ray diffraction
S He et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Decomposition of cementite in pearlitic steel due to plastic deformation
VG Gavriljuk
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Microstructure evolution in pearlitic steels during wire drawing
M Zelin
ACTA MATERIALIA (2002)
Effect of carbon content on the Hall-Petch parameter in cold drawn pearlitic steel wires
WJ Nam et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Atom probe study on the ductility of drawn pearlitic steels
N Maruyama et al.
SCRIPTA MATERIALIA (2002)
Estimation of the amount of retained austenite in austempered ductile irons using neural networks
MA Yescas et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Optimization of mechanical properties of high-carbon pearlitic steels with Si and V additions
K Han et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Effect of interlamellar spacing on the mechanical properties of 0.65% C steel
OP Modi et al.
MATERIALS CHARACTERIZATION (2001)
Cementite decomposition in heavily drawn pearlite steel wire
K Hono et al.
SCRIPTA MATERIALIA (2001)
Effects of microstructural parameters on work hardening of pearlite at small strains
CM Bae et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)
Fracture toughness of medium-high carbon steel for railroad wheel
H Sakamoto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Atomic-scale observation and modelling of cementite dissolution in heavily deformed pearlitic steels
X Sauvage et al.
PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES (2000)
Effect of interlamellar spacing on cementite dissolution during wire drawing of pearlitic steel wires
WJ Nam et al.
SCRIPTA MATERIALIA (2000)
Share Paper
