Related references
Note: Only part of the references are listed.Cellulose/graphene bioplastic for thermal management: Enhanced isotropic thermally conductive property by three-dimensional interconnected graphene aerogel
Li Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Fabrication and Properties of Polyethylene/Cellulose Nanocrystal Composites
Janak Sapkota et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)
Martin Spoerk et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene
Lu Wang et al.
POLYMER (2017)
Polymer nanocomposites with nanorods having different length distributions
Janak Sapkota et al.
POLYMER (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Strategy for the Improvement of the Mechanical Properties of Cellulose Nanofiber-Reinforced High-Density Polyethylene Nanocomposites Using Diblock Copolymer Dispersants
Keita Sakakibara et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Anti-adhesive layers on stainless steel using thermally stable dipodal perfluoroalkyl silanes
Baris Kaynak et al.
APPLIED SURFACE SCIENCE (2017)
A Green Plastic Constructed from Cellulose and Functionalized Graphene with High Thermal Conductivity
Na Song et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Polymer Nanocomposites with Cellulose Nanocrystals Featuring Adaptive Surface Groups
Jens C. Natterodt et al.
BIOMACROMOLECULES (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Microcrystalline-cellulose and polypropylene based composite: A simple, selective and effective material for microwavable packaging
S. Ummartyotin et al.
CARBOHYDRATE POLYMERS (2016)
Conductive polyolefin-rubber nanocomposites with carbon nanotubes
Fugen Daver et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Fused deposition modelling with ABS-graphene nanocomposites
Sithiprumnea Dul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Microstructural design and additive manufacturing and characterization of 3D orthogonal short carbon fiber/acrylonitrile-butadiene-styrene preform and composite
Zhenzhen Quan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
3D printing with polymers: Challenges among expanding options and opportunities
Jeffrey W. Stansbury et al.
DENTAL MATERIALS (2016)
Enhanced Thermal and Mechanical Properties of Polypropylene Composites with Hyperbranched Polyester Grafted Sisal Microcrystalline
Lingyan Wu et al.
FIBERS AND POLYMERS (2016)
Effect of Aminosilane Modification on Nanocrystalline Cellulose Propertiesq
Nurul Hanisah Mohd et al.
JOURNAL OF NANOMATERIALS (2016)
Investigations for melt flow index of Nylon6-Fe composite based hybrid FDM filament
Harish Garg et al.
RAPID PROTOTYPING JOURNAL (2016)
Development of rapid tooling using fused deposition modeling: a review
Kamaljit Singh Boparai et al.
RAPID PROTOTYPING JOURNAL (2016)
Anisotropic thermally conductive flexible films based on nanofibrillated cellulose and aligned graphene nanosheets
Na Song et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
Zixiang Weng et al.
MATERIALS & DESIGN (2016)
Experimental investigations on fused deposition modelling of polymer-layered silicate nanocomposite
Vishal Francis et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
Mechanical properties and failure modes of recycled polypropylene/microcrystalline cellulose composites
N. Izzati Zulkifli et al.
MATERIALS & DESIGN (2015)
Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
Wenzheng Wu et al.
MATERIALS (2015)
Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
Miquel Domingo-Espin et al.
MATERIALS & DESIGN (2015)
Fused deposition modeling with polypropylene
O. S. Carneiro et al.
MATERIALS & DESIGN (2015)
Extrusion of Polysaccharide Nanocrystal Reinforced Polymer Nanocomposites through Compatibilization with Poly(ethylene oxide)
Mariana Pereda et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Effect of Cellulose Nanocrystals (CNC) Particle Morphology on Dispersion and Rheological and Mechanical Properties of Polypropylene/CNC Nanocomposites
Vahid Khoshkava et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Mechanical properties of polypropylene composites reinforced by surface-coated microfibrillated cellulose
Shinichiro Iwamoto et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
A specific groove design for individualized healing in a canine partial sternal defect model by a polycaprolactone/hydroxyapatite scaffold coated with bone marrow stromal cells
Yiwen Xuan et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)
Effect of silanization of titanium dioxide on photocatalytic decomposition of 2,4-dinitropheonol under irradiation with artificial UV light and sunlight
Fumihide Shiraishi et al.
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2014)
Reinforcing Poly(ethylene) with Cellulose Nanocrystals
Janak Sapkota et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2014)
Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
B. M. Tymrak et al.
MATERIALS & DESIGN (2014)
Influence of mechanical treatments on the properties of cellulose nanofibers isolated from microcrystalline cellulose
Davide Bandera et al.
REACTIVE & FUNCTIONAL POLYMERS (2014)
Mechanical and Morphological Properties of Polypropylene/Nano α-Al2O3 Composites
F. Mirjalili et al.
SCIENTIFIC WORLD JOURNAL (2014)
Influence of Building Parameters on the Dynamic Mechanical Properties of Polycarbonate Fused Deposition Modeling Parts
Miquel Domingo-Espin et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2014)
Tensile and impact properties of polypropylene/microcrystalline cellulose treated with different coupling agents
N. Samat et al.
COMPOSITE INTERFACES (2013)
Water-repellent all-cellulose nanocomposite using silane coupling treatment
Hossein Yousefi et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2013)
Structural characteristics of fused deposition modeling polycarbonate material
Walter Castro Smith et al.
POLYMER TESTING (2013)
Additive manufacturing: technology, applications and research needs
Nannan Guo et al.
FRONTIERS OF MECHANICAL ENGINEERING (2013)
Polycaprolactone-based fused deposition modeled mesh for delivery of antibacterial agents to infected wounds
Erin Yiling Teo et al.
BIOMATERIALS (2011)
Dispersion evaluation of microcrystalline cellulose/cellulose nanofibril-filled polypropylene composites using thermogravimetric analysis
Han-Seung Yang et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2011)
Mechanical Properties, Morphology, Thermal Performance, Crystallization Behavior, and Kinetics of PP/Microcrystal Cellulose Composites Compatibilized by Two Different Compatibilizers
Zhang Xiuju et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2011)
Characterization of microcrystalline cellulose prepared from lignocellulosic materials. Part I. Acid catalyzed hydrolysis
Abeer M. Adel et al.
BIORESOURCE TECHNOLOGY (2010)
Ultralyophobic Oxidized Aluminum Surfaces Exhibiting Negligible Contact Angle Hysteresis
Atsushi Hozumi et al.
LANGMUIR (2010)
Fluorocarbon Coatings Via Plasma Enhanced Chemical Vapor Deposition of 1H,1H,2H,2H-perfluorodecyl Acrylate-1, Spectroscopic Characterization by FT-IR and XPS
Virendra Kumar et al.
PLASMA PROCESSES AND POLYMERS (2010)
Fused deposition modeling of patient-specific polymethylmethacrylate implants
David Espalin et al.
RAPID PROTOTYPING JOURNAL (2010)
Polymer Nanocomposites with Nanowhiskers Isolated from Microcrystalline Cellulose
Jeffrey R. Capadona et al.
BIOMACROMOLECULES (2009)
Polypropylene-microcrystalline cellulose composites with enhanced compatibility and properties
Steven Spoljaric et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Extrusion and characterization of functionalized cellulose whiskers reinforced polyethylene nanocomposites
Aparecido Junior de Menezes et al.
POLYMER (2009)
Surface Modification of ZnO Using Triethoxysilane-Based Molecules
C. G. Allen et al.
LANGMUIR (2008)
Trabecular scaffolds created using micro CT guided fused deposition modeling
B. C. Tellis et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2008)
Surface modification of microfibrillated cellulose for epoxy composite applications
Jue Lu et al.
POLYMER (2008)
Evaluation of interphase properties in a cellulose fiber-reinforced polypropylene composite by nanoindentation and finite element analysis
Seung-Hwan Lee et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Interfacial interactions of a novel mechanochemical composite of cellulose with maleated polypropylene
WL Qiu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Nanofiber-reinforced polymers prepared by fused deposition modeling
ML Shofner et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Effects of different treatments on the interface of HDPE/lignocellulosic fiber composites
X Colom et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Interaction of silane coupling agents with cellulose
M Abdelmouleh et al.
LANGMUIR (2002)
Short fiber reinforced composites for fused deposition modeling
WH Zhong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Share Paper
