4.7 Article

An electrocoagulation column (ECC) for groundwater purification

Journal

JOURNAL OF WATER PROCESS ENGINEERING
Volume 4, Issue -, Pages 25-30

Publisher

ELSEVIER SCIENCE BV
DOI: 10.1016/j.jwpe.2014.08.004

Keywords

Electrocoagulation column; Chromium (VI); Brackish groundwater; Heavy metals

Ask authors/readers for more resources

A novel electrocoagulation column (ECC) has been evaluated for the treatment of brackish groundwater to reduce the concentrations of Cr(VI) and other ions to be within drinking water limits. The ECC was fabricated from Plexiglas and had a rod anode and helical cathode; both electrodes were made from iron. The effect of influent flow rate, applied current density, initial concentration, pH and air mixing were studied at a temperature of 25 degrees C. The results showed that Cr(VI) removal rate was inversely proportional to the inlet flow rate and directly proportional to applied current density, reaching 100% chromium removal for initial chromium concentration of 5 mg/L at inlet flow rate of 30 mL/min with lowest energy consumption of 0.75 kWh/m(3) and dissolved iron of 0.185 mg/L with an electrical cost of 0.03 US $/m(3) of treated groundwater. The EC column could also reduce other contaminants and metals ions such as Mg, Zn and Sr. Overall, the study affirmed that electrocoagulation is a reliable and environmentally compatible technique for the purification of groundwater. (C) 2014 Elsevier Ltd. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available