Fracture prediction based on a two-surface plasticity law for the anisotropic magnesium alloys AZ31 and ZE10

The objective of the present study was to characterize the fracture limits of two magnesium sheet alloys, AZ31 and ZE10, using different ductile fracture criteria and to evaluate these criteria for different loading conditions in the framework of finite element (FE) simulations. A recently proposed two-yield surface plasticity model, which separates the strain contributions of dislocation glide and mechanical twinning on the (10-12) plane, was adopted to describe the strength differential effect and anisotropic hardening behaviors of the magnesium alloys. The deformation and fracture behaviors of the materials were measured in uniaxial tension, U-notched tension, and shear, thus encompassing different stress states. The fracture criteria parameters were optimized using an experiment simulation hybrid approach. The suggested deformation and fracture models were applied to the FE analysis of thin square tubes under two loading conditions, namely, global axial tube compression and three-point bending. The simulation results were compared with those of the respective structure tests. The two-yield-surface model was found to be able to successfully reproduce the punch load displacement responses in both cases, revealing its superior performance relative to the von Mises model. In the case of failure prediction, all fracture criteria resulted in similar predictions for tube compression. However, the failure prediction for three-point bending was found to be highly dependent on the fracture criteria, among which the MMC criterion provided the most realistic prediction. The prediction results were further analyzed by investigating the stress history and damage evolution in the critical regions of the specimens during tube compression and three-point bending.