Journal
INTERNATIONAL JOURNAL OF PLASTICITY
Volume 106, Issue -, Pages 107-128Publisher
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijplas.2018.03.004
Keywords
Strengthening mechanistris; Twinning; Anisotropic material; Mechanical testing; In-situ testing
Funding
- Spanish Ministry of Economy and Competitiveness [MAT2016-78850-R]
- Czech Science Foundation [16-12075S]
Ask authors/readers for more resources
The effect of the orientation of the non-recrystallized grains (non-DRX) and the LPSO phase on plasticity in extruded MgY2Zn1 alloy with a bimodal grain structure have been studied in-situ using the combination of synchrotron diffraction and acoustic emission techniques during compression tests. The adaptive sequential k-means (ASK) procedure was applied to analyze the acoustic emission signal. This method can successful separate the signal for each possible deformation systems. Combining both techniques, the deformation mechanisms that take place during the compression tests under different loading directions have been distinguish. Independently of the loading direction, the beginning of the macroscopic plasticity is always controlled by the activation of basal slip system in the DRX grains. However, highly oriented non-DRX grains and LPSO phase have a strong influence over the compressive deformation of the MgY2Zn1 alloy. The basal planes in the non-DRX grains were oriented parallel to the extrusion direction (ED). Thus, the activation of the {10 (1) over bar2} < 10 (11) over bar > extension twinning was found to be significant only in the ED mode. In the other two loading cases, TD and 45, the activation of non basal slip systems has been detected. On the other hand, the reinforcing effect of the elongated LPSO phase is the most effective, if the loading axis is aligned with the fiber direction (extrusion direction) since the load transfer mechanism is more effective. In this loading case, the LPSO can be plastically deformed due to kinking. This deformation mode has been isolated by the ASK procedure and characterized by in-situ scanning electron microscopy.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available